All Categories
History
This section provides an overview for air impact drivers as well as their applications and principles. Also, please take a look at the list of 12 air impact driver manufacturers and their company rankings. Here are the top-ranked air impact driver companies as of January, 2025: 1.TFT-Pneumatic, LLC, 2.AIRBOSS AIR TOOLS CO., LTD., 3.Mighty Seven.
Table of Contents
An air impact driver (pneumatic impact driver) is a pneumatic tool for tightening and loosening screws using compressed air from an air compressor as a power source.
The hammer is rotated by an air motor, and the rotational force of the hammer is converted to impact force. The hammer strikes the anvil (rotating shaft for tightening and loosening) and applies impact to generate a strong tightening and loosening force.
Air impact drivers are very useful in screw-tightening operations where human power is inadequate.
Air impact drivers are used in a variety of locations, including construction sites and maintenance shops. Since they are powered by compressed air from an air compressor or other source, their rotating parts generate less heat than electric motors, making them suitable for continuous work.
Specific examples of use are as follows
1. Superior Durability
Compared to electric tools, the simple structure makes it difficult to break and easy to maintain.
2. Compact and Easy to Handle
Many air impact drivers are smaller and lighter than electric screwdrivers of equivalent capacity. They can also generate high torque for sufficient screw tightening.
3. Less Hazardous Because They Do Not Use Electricity
Air impact drivers do not use electricity when in use, so there is little risk of electrical leakage or electric shock. Another important feature is that they do not produce sparks, making them suitable for work at gas stations and other sites where fire is strictly prohibited.
1. Need to Be Careful Not to Over-Tighten
Since air impact drivers do not have a clutch, the tightening force must be adjusted by pulling a lever or switch. Excessive tightening force may cause damage to the screw head or cracking of the workpiece to be tightened, so care is required.
2. High Installation Cost
Air impact drivers require an air compressor as a power source. The disadvantage of air compressors is that they are expensive, costing 150,000 to 300,000 yen per unit, making them expensive to install. However, since air tools are less likely to cause problems than electric tools in some respects, you may want to consider purchasing one if you intend to use it for the long term.
3. High Noise Level
Noise during use is loud and can be a problem in some environments. Before purchasing, it is necessary to check the installation location and noise level.
The shape and starting method of air impact drivers vary from product to product. It is necessary to select the appropriate one according to the working environment and purpose.
Pistol Type
This is a general-purpose shape that can work in multiple directions, such as upward, downward, and sideways, and is widely used in a variety of settings, such as job sites and automobile repair shops.
Straight Type (Pen Type)
The body is straight and the anvil faces downward, making it suitable for tightening and loosening screws, such as in assembly and disassembly on production lines.
Angle Type
The anvil is angled at 90 degrees to the main body, so it is used when it is difficult to work with the pistol type or straight type.
Starting Lever Type
Air is supplied to the air motor when the starting lever is pushed to start rotation.
Push Start Type
Air is supplied to the air motor when the bit is pressed against the screw to be tightened, and the air motor rotates. No need to keep pressing the lever.
Lever-Push Start Type
This system is a combination of the start lever type and push start type. Air is supplied to the air motor when the starting lever is pushed, and the bit rotates when the bit is pressed against the screw.
*Including some distributors, etc.
Sort by Features
Sort by Area
TFT-Pneumatic, LLC, founded in 2007, is a distributor of pneumatic tools, non-sparking tools, and cutting and grinding wheels headquartered in Houston, Texas. The company offers tools used in forges, mines, shipyards, offshore platforms, and FPSO for material removal, grinding, sanding, surface preparation, and weld seam removal. The company's production facilities are compliant with both the ISO 9001 and ISO 14001 standards and serve various industries including mining & metals, oil & energy, aviation & aerospace, defense & space, railroad, and shipbuilding.
AIRPRO INDUSTRY CORP., established in 2001, is a manufacturer and supplier of pneumatic tools, headquartered in New Taipei City, Taiwan. Their wide range of pneumatic tools, branded as AIRPROWU, includes air tools, aircraft tools, oil pulse tools, air screwdrivers, and air compressors. Additionally, AIRPRO offers spray guns and accessories, pressure tanks and pumps, hand tools, auto body shop tools, and auto repair tools. Furthermore, the company provides a range of cordless tools and electric tools. AIRPRO caters to original equipment manufacturers (OEMs) and original design manufacturers (ODMs) in America, Europe, and Asia, providing customized products to meet their specific requirements.
AIRBOSS AIR TOOLS CO., LTD., established in 1980 and headquartered in Taichung City, Taiwan, is a manufacturer of pneumatic tools. The company boasts an extensive and diverse product catalog, which includes the Air discharge adjustment pneumatic wrench, Air random orbital sanders, Air Micro die grinder Micro Angle/Pencil Grinder, Shut off type APW series, and Air straight line sanders, among others. These tools are used in industries such as petrochemicals, shipbuilding, auto repair, and car assembly, showcasing adaptability and importance in various applications.
Chicago Pneumatic, founded in 1901 and now a subsidiary of Atlas Copco Group of Sweden, is a manufacturer headquartered in Rock Hill, South Carolina, specializing in industrial tools and solutions, particularly power tools and air compressors. The company offers a range of products, including cordless, electric, hydraulic, and pneumatic tools. They also provide workplace equipment and solutions, such as lift equipment, workshop cranes, workshop presses, and torque wrenches. Additionally, CP offers compressors, construction equipment, and air motor solutions. These products find applications in various industries, including vehicle service, maintenance and repair of mining, construction, and infrastructure equipment, as well as industrial production.
PUMA INDUSTRIAL CO., LTD., founded in 1979 and based in Taiwan, is a manufacturer and provider of power tools and spare parts. Its products include ISO 9001-certified air tools, air compressors, pressure washers, pressure vessels, medical equipment, and related accessories. The company also delivers Oil Free and Oil Lube air compressor applications for Industrial, Medical, General, Professional, Food and Chemical Industries. PUMA INDUSTRIAL CO. offers its services in more than 138 countries.
Sumake Industrial Co., Ltd., founded in 1997 and based in Taipei City, Taiwan, is a manufacturer and supplier specializing in direct current (DC) and pneumatic tools, as well as compressors. Their product portfolio includes assembly, cordless, electric, and pneumatic tools. Additionally, Sumake offers various types of air compressors, including mini, piston (belt), portable, and screw compressors, along with associated parts and accessories like cast iron pumps (compressor heads). Supporting their production operations, Sumake has a compressor facility, established as a joint venture with Lacmé, a French manufacturer. The company provides workshop equipment, such as air tapping machines, vacuum cleaners, and more.
Kuken Co., Ltd., established in 1968 and headquartered in Osaka, Japan, is a manufacturer of pneumatic tools. Its product lineup, featuring tools like the KW-T250 Advanced Twin Hammer and KW-1600proZ New Standard 1/2" Sq. Drive Impact Wrenches, serves various purposes such as bolt and screw fastening, drilling, and underwater work. The company's air tools, holding ISO certification, are designed to meet a wide spectrum of industrial needs, emphasizing precision and efficiency in pneumatic applications.
Sioux Tools, Inc. is a manufacturer of power tools like drills and sanders, established in 1914 and headquartered in Murphy, United States of America. The company manufactures pistol grip drills, right-angle nut runners, ratchet wrenches, straight die grinders, and orbital jitterbug sanders. It also produces square shank scalers, skin clamp runners, rivet shavers, and industrial abrasive accessories. Its drills have a wide range of configurations, speeds, and options to ensure a perfect match for any application. The industries served include manufactured housing, recreational vehicles, woodworking, aerospace & aviation, and petrochemical industries.
Gison Machinery Co., Ltd was founded in 1945 and is currently located in Taichung, Taiwan. Gison is a manufacturer of air tools, pneumatic tools, and related equipment for numerous applications including decorating, construction, aerospace, and shipping industries. Tools such as sanders, orbital sanders, grinders, and suction cups for lifting are made as both robotic arm attachments as well as handheld pneumatic devices. Other pneumatic tools include air hammers, screwdrivers & wrenches, dent pullers, and most other standard hand tools or power tools.
Vessel Co., Inc. is a Japanese manufacturer and distributor of tools and related hardware that was established in 1962 in Higashinari-ku, Osaka. The company produces various hand tools, as well as industrial- and construction-grade bits and sockets such as impact wrenches and ratchets. It also offers pneumatic and electric tools including air nippers, gas engined tools, and electric screwdrivers. Vessel Co. operates internationally with a network of sales offices and branches in several major cities across Japan, as well as overseas subsidiaries in Asia, North America, and Europe.
Robert Bosch Power Tools GmbH, based in Baden-Württemberg, Germany, has been an ISO 9001-certified manufacturer and distributor of electric power tools and accessories since its establishment in 1886. The company offers cordless concrete nailers, rotary hammers, benchtop tools, and various other power tools primarily for the construction and manufacturing industries. The company integrates several safety features under its PROtection system, designed to reduce the risk of injury or long-term diseases. Key features include KickBack Control, Drop Control, and an Intelligent Brake System, all of which enhance user safety during operation.
Ranking as of January 2025
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | TFT-Pneumatic, LLC |
9.5%
|
| 2 | AIRBOSS AIR TOOLS CO., LTD. |
9.5%
|
| 3 | Mighty Seven |
9.5%
|
| 4 | Bosch Professional Power Tools & Accessories |
9.5%
|
| 5 | VESSEL CO.,INC. |
9.5%
|
| 6 | Sumake Industrial Co., Ltd. |
9.5%
|
| 7 | PUMA INDUSTRIAL CO., LTD. |
9.5%
|
| 8 | AIRPRO |
9.5%
|
| 9 | Chicago Pneumatic |
9.5%
|
| 10 | Sioux Tools, Inc. |
4.8%
|
Derivation Method
The ranking is calculated based on the click share within the air impact driver page as of January 2025. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
Taiwan
|
4 | 50.0% |
|
United States of America
|
2 | 25.0% |
|
India
|
1 | 12.5% |
|
Japan
|
1 | 12.5% |
21 products found
21 products
Atlas Copco UK Holdings Ltd
60+ people viewing
Last viewed: 4 hours ago
Standard Response
Precision and superior ergonomics in the manufacturing process ■Summary The LUM series is the main product of air screwdrivers. Continuously fine-...
Atlas Copco UK Holdings Ltd
50+ people viewing
Last viewed: 4 hours ago
Standard Response
Precision and superior ergonomics in the manufacturing process ■Summary Pistol-style slip clutch screwdriver Twist models are equipped with a spri...
Atlas Copco UK Holdings Ltd
90+ people viewing
Last viewed: 15 hours ago
Standard Response
Simple, fast and reliable ■Summary Atlas Copco's pistol-style shut-off screwdriver LUM is the workhorse of air-powered screwdrivers. The LUM Pisto...
Atlas Copco UK Holdings Ltd
50+ people viewing
Last viewed: 4 hours ago
Standard Response
Direct drive screwdriver with excellent ergonomics ■Summary Pistol direct drive screwdriver LUD is suitable for self-drilling and wood screw tight...
30+ people viewing
Last viewed: 9 hours ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
20+ people viewing
Last viewed: 18 hours ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
20+ people viewing
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
20+ people viewing
Last viewed: 17 hours ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
30+ people viewing
Last viewed: 13 hours ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
20+ people viewing
Last viewed: 1 day ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
Shinano Manufacturing Co., Ltd.
40+ people viewing
Last viewed: 16 hours ago
Double hammer type bit insertion port 6.35mm ■Standard accessories Service oil, air plug (20PM type), air regulator, Phillips bit (A14) ■Features...
Shinano Manufacturing Co., Ltd.
40+ people viewing
Last viewed: 16 hours ago
Double hammer type strong type bit insertion port 6.35mm ■Standard accessories Service oil, air plug (20PM type), air regulator, Phillips bit (A14...
Shinano Manufacturing Co., Ltd.
40+ people viewing
Last viewed: 4 hours ago
Double hammer type strong type bit insertion port 6.35mm ■Standard accessories Service oil, air plug (20PM type), air regulator, Phillips bit (A14...
Shinano Manufacturing Co., Ltd.
40+ people viewing
Last viewed: 16 hours ago
Double hammer type bit insertion port 6.35mm ■Standard accessories Service oil, air plug (20PM type), air regulator, Phillips bit (A14) ■Double h...
30+ people viewing
Last viewed: 1 day ago
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
20+ people viewing
NPK's impact driver is a small, lightweight, high-performance product that was developed based on the small two-hammer impact wrench (T-wrench) and...
Yoshikawa Shoko Co., Ltd.
40+ people viewing
Last viewed: 4 hours ago
Can be attached directly to a rechargeable impact driver. Integrated type reduces shaking and improves work efficiency. ■Compatible materials - Be...
Yoshikawa Shoko Co., Ltd.
40+ people viewing
Last viewed: 4 hours ago
Can be attached directly to a rechargeable impact driver. Integrated type reduces shaking and improves work efficiency. ■Compatible materials - Be...
Yoshikawa Shoko Co., Ltd.
40+ people viewing
Last viewed: 4 hours ago
Can be attached directly to a rechargeable impact driver. Integrated type reduces shaking and improves work efficiency. ■Compatible materials - Be...
Yoshikawa Shoko Co., Ltd.
50+ people viewing
Last viewed: 4 hours ago
Achieves smooth drilling with a specially shaped carbide tip. ■Compatible materials - Suitable for: tiles, roof tiles, marble, ALC. - Perforation ...
