Marto Co., Ltd.'s Cutting Tools

■Features This is a resin-bonded wheel that uses heat-resistant resin as the main bond component and binds diamond abrasive grains with a special f...

• Machining / Machine Tools

• Cutting Tools

■Features The abrasive grain layer is segment-shaped. Since there is a space between the abrasive grain layers, it has good ability to supply grind...

• Machining / Machine Tools

• Cutting Tools

■Features By continuously forming an abrasive layer of diamond abrasive grains and metal bond on the outer periphery of a high-rigidity, high-preci...

• Machining / Machine Tools

• Cutting Tools

■Features All-blade type with diamond abrasive grains and phenolic thermosetting resin as a binder. ■Applications Small precision cutting of expen...

• Machining / Machine Tools

• Cutting Tools

■Features This blade has diamond abrasive grains attached to the outer periphery of a rigid and precise base metal using plating. The electrodeposi...

• Machining / Machine Tools

• Cutting Tools

■Features It uses a strong saw base (base metal), has a unique cutting edge structure with numerous small holes (mesh-like) in the cutting edge, an...

• Machining / Machine Tools

• Cutting Tools

■Features Same structure as Kimberley style. It rotates at low speed and has fine abrasive grains to reduce chipping. ■Applications Minerals and g...

• Machining / Machine Tools

• Cutting Tools

■Features You can cut the thread like this. ■Applications Aluminum, soft metal, wood, plastic, etc.

• Machining / Machine Tools

• Cutting Tools

■Features CBN (cubic boron nitride) and a layer of metal binder abrasive grains are continuously molded onto the outer periphery of the rigid and h...

• Machining / Machine Tools

• Cutting Tools

■Features The CBN blade (B) has the same structure as the metal bond type (M), but the binder (B) is a resin that has much higher heat resistance t...

• Machining / Machine Tools

• Cutting Tools

■Features This sharp blade is made of high-speed steel (SKH) and is sharpened for cutting soft metals (mainly non-ferrous metals). ■Applications P...

• Machining / Machine Tools

• Cutting Tools

■Features This is a sharp blade with a sharpening on the outer periphery of the high-speed steel base metal. ■Applications Cutting samples of new ...

• Machining / Machine Tools

• Cutting Tools

■Features It is a sharpened "saw blade" type cutting blade with a carbide metal tip silver-brazed to a carbon steel base metal. ■Applications Larg...

• Machining / Machine Tools

• Cutting Tools

■Features This is an all-blade type without a base metal made from diamond abrasive grains using the electroforming method. A thin diamond blade fo...

• Machining / Machine Tools

• Cutting Tools

■Features This is an all-blade type (no base metal) cutting whetstone manufactured by using white alundum (high-purity fused alumina) as the abrasi...

• Machining / Machine Tools

• Cutting Tools

■Features This is an all-blade type (no base metal) cutting whetstone manufactured by using green carborantum (high-purity silicon carbide) as the ...

• Machining / Machine Tools

• Cutting Tools

■Summary Good polishing is possible due to its abrasive retention and wear resistance. It is especially effective for polishing electronic parts, f...

• Machining / Machine Tools

• Cutting Tools

■Features This is the most standard vise, and there is also a (medium size 110 opening). ■Major medium/large cutting machines 〇: Can be set, -: C...

• Machining / Machine Tools

• Cutting Tools

■Features Cut the core sample without rotating it. Good cutting right angle accuracy. ■Major medium/large cutting machines 〇: Can be set, -: Cann...

• Machining / Machine Tools

• Cutting Tools

■Features For cleavable samples that are prone to notches. ■Major medium/large cutting machines 〇: Can be set, -: Cannot be set, △: Additional wo...

• Machining / Machine Tools

• Cutting Tools

■Features Glue the sample to the mounting table (75mm x 75mm x 10tmm) and place the mounting table in a vise. 360° horizontal rotation. ■Major med...

• Machining / Machine Tools

• Cutting Tools

■Features One-way tilt angle ±10° mount stand (75mm x 75mm x 10tmm) can be set. ■Major medium/large cutting machines 〇: Can be set, -: Cannot be ...

• Machining / Machine Tools

• Cutting Tools

■Features Can be set with 360 degree horizontal rotation and ±10 degree tilt angle in one direction (75mm x 75mm x 10tmm). ■Major medium/large cut...

• Machining / Machine Tools

• Cutting Tools

■Features Can be set with 360 degree horizontal rotation and ±10 degree tilt angle in two directions (75mm x 75mm x 10tmm). ■Major medium/large cu...

• Machining / Machine Tools

• Cutting Tools

■Features Mainly used for optical imaging (crystal orientation determination) equipment. Suitable for single crystal materials such as metals, allo...

• Machining / Machine Tools

• Cutting Tools

■Features It is set using a permanent magnetic chuck, and various vises are set on top of this. Easy to put on and take off the vise. ■Major mediu...

• Machining / Machine Tools

• Cutting Tools

■Features Used for chucking large samples and large cutting machines. The composition consists of a set of double presser feet, a slide table (MST-...

• Machining / Machine Tools

• Cutting Tools

■Applications Mainly for CBN (Borazon). Whetstone up to #400

• Machining / Machine Tools

• Cutting Tools

■Applications For cutting wheels. Whetstone up to #800

• Machining / Machine Tools

• Cutting Tools