Filter

Filter Carbide End Mills Further

Rinos Co., Ltd.'s Carbide End Mills

411 registered Carbide End Mills of Rinos Co., Ltd.

Rinos Co., Ltd.

4 -blade carbide end mill 4 -blade cut titanium cut KT7487

■ Characteristics ・ Pure titanium / titanium alloy ・ It is an end mill with radius for difficult cuttings up to 30 to 45 HRC. ・ It is for 30 ° s...


3 models listed

Rinos Co., Ltd.

4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT7707

■ Characteristics ・ Dry cutting is possible by adopting a unique inequality and alunit-s coat, and a quiet and stable processing accuracy is reali...


9 models listed

Rinos Co., Ltd.

4 -piece blade failure / inequality carbide end mill 4 blade speed cut 35 ~ 38 ° Oil hole KT8507

■ Characteristics ・ Speed ​​-cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in the ultra -high -speed...


7 models listed

Rinos Co., Ltd.

4 -piece blade failure / inequality carbide end mill 4 blade speed cut 39 ~ 42 ° Oil hole KT8557

■ Characteristics ・ Speed ​​-cut's unique inequality and Ultradur coat achieves a quiet and stable processing accuracy even in the ultra -high -sp...


7 models listed

Rinos Co., Ltd.

4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT8207

■ Characteristics ・ Speed ​​-cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in the ultra -high -speed...


9 models listed

Rinos Co., Ltd.

4 -piece blade failure / inequality carbide end mill 4 blade speed with cut neck 35 ~ 38 ° Stub type KT7627

■ Characteristics ・ Speed-cut's unique inequality and Alunit-S coat achieves quiet and stable processing accuracy even in the ultra-high-speed pro...


5 models listed

Rinos Co., Ltd.

Carbide Rafing End Mill 3 Blade ALUNIT Coating KT7097

■ Characteristics ・ A well -balanced 3 -piece blade shape and alUNIT coat can be processed to a wide range of ingredients. ・ Especially suitable ...


10 models listed

Rinos Co., Ltd.

Carbide rafing end mill 4 blades ALUNIT coating KT7697

■ Characteristics ・ Make Stag's unique 4 -blade -shaped and high -performance alUNIT coat will show outstanding performance. ・ The surface roughn...


10 models listed

Rinos Co., Ltd.

Carbide Ruffing End Mill Fine Pitch 30 ° Twist KT7027

■ Characteristics ・ Make Stag's unique fine pitch blade and high -performance alUNIT coat will show outstanding performance. ・ The surface roughn...


9 models listed

Rinos Co., Ltd.

Carbide Ruffing End Mill Fine Pitch 20 ° twist short type KT7047

■ Characteristics -Meike Stag's unique feature-knitting and high-performance Alunit-S coat will show outstanding performance. ・ The surface roughn...


9 models listed

Rinos Co., Ltd.

Aluminum processing end millefine pitch 45 ° twist short type KT7087

■ Characteristics ・ The combination of 45 ° twist and high-performance AlUnit-S coat is powerful in rough processing on stainless steel and diffic...


6 models listed

Rinos Co., Ltd.

Dyna End Mill High Rigid Type Super hard Work 4 Blade Neck Short Blade Dyna060

■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...


4 models listed

Rinos Co., Ltd.

Dyna End Mill Super hard 6 Blade Regular Blade Long Shank Dyna060R

■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...


6 models listed

Rinos Co., Ltd.

Dyna End Mill Super Hard 6 Blade Long Blade Dyna060L

■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general steel. ・ TIALCN (mu...


6 models listed

Rinos Co., Ltd.

Nako End Mill 3 Blade Carbide Square End Mill NACRO 030

■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, titanium and stainless ...


10 models listed

Rinos Co., Ltd.

Nako End Mill 4 -Blade Carbide Square End Mill NACRO 040

■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, titanium and stainless ...


10 models listed

Rinos Co., Ltd.

Nako End Mill 90 ° Carbide V Point NACRO 020v90

■ Characteristics ・ Ideal for titanium alloy and high -hardness material (~ 62 HRC) Centering processing, C -surface processing, internal removal ...


10 models listed

Rinos Co., Ltd.

Nako End Mill 60 ° Carbide V Point NACRO 020v60

■ Characteristics ・ It is ideal for processing such as titanium alloys and high -hardness materials (~ 62hrc) Various hard -shaped materials on pr...


5 models listed

Rinos Co., Ltd.

Nako End Mill 120 ° Carbide V Point NACRO 020V120

■ Characteristics ・ Ideal for titanium alloys and high -hardness materials (~ 62 HRC) Centering processing, surfacing processing, holes surface pr...


5 models listed

Rinos Co., Ltd.

Long Blade Carbide End Mill 2 Blade Long Blade EN020L

The blade length is long and long -term shaving is possible. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

Long Blade Carbide End Mill 2 Blade Extra Long Blade EN020XL

The blade length is long and long -term shaving is possible. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

Crash Ra Fing 70 6 -piece blade Carbide Ruffing End Mill CRUSH060

■ Characteristics ・ We adopt a super -particle carbide of Germany, which has been carefully selected for high -rigid material processing. -The uni...


6 models listed

Rinos Co., Ltd.

Carbide Solid End Mill 3 -Blade End Mill

■ Characteristics ・ Balanced 3 blades 30 ゚ Thirty twist and LB coat (TIALN system) The discharge of cutting is well -cut to stainless steel, high ...


10 models listed

Rinos Co., Ltd.

Carbide Solid End Mill Left Refrigeration Diversion 3-Blade 3 Blade End Mill TIAIN Coating 105-G

■ Characteristics ・ Left -turn end mill of No.105. ・ You can get a very good surface roughness. ・ All sizes pinkad. * There are other part numb...


10 models listed

Rinos Co., Ltd.

Carbide Solid End Mill Left-turning Diversion 3-Blade 3 Blade End Mill 105-G-N

■ Characteristics ・ No.105 is a non -pussy for left turn. ・ Good surface roughness can be obtained in materials such as aluminum and brass. ・ Al...


10 models listed

Rinos Co., Ltd.

V -type carbide solid end mill MV90 90 °

■ Characteristics ・ Centering processing, C -surface processing, hole surface processing, internal processing, V groove processing, side processin...


9 models listed

Rinos Co., Ltd.

V -type carbide solid end mill MV60 60 °

■ Characteristics ・ It can be widely processed with one bottle, such as surfacing processing, hole surface removal, side processing, etc., improvi...


9 models listed

Rinos Co., Ltd.

V -type carbide solid end mill MV120 120 °

■ Characteristics ・ Centering processing, chamfer processing, hole surface processing, internal processing, V groove processing, side processing, ...


9 models listed

Rinos Co., Ltd.

CFRP Glass Fiber Carbide End Mill 106 No bottom blade for fiber

■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

Carbide end mill for CFRP Glass fiber processing 107 with bottom blade for fiber

■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

CFRP Glass Fiber Processing Carbide End Mill 108 Fiber End Mill

■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

CFRP Glass Fiber Processing Carbide End Mill 109 Fiber Drill 135 °

■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.


10 models listed

Rinos Co., Ltd.

Carbide end mill BF butterfly end mill for aluminum, light alloy, plastic processing

■ Characteristics ・ It is a blade shape that can avoid the chatter of the processed product and make a very stable cutting. ・ Suitable for proces...


10 models listed


9 models listed

Rinos Co., Ltd.

Rapido Carbide End Mill 162 2 -blade

■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), titanium and inconel...


6 models listed

Rinos Co., Ltd.

Rapido Carbide End Mill 164 4 -blade

■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), titanium and inconel...


7 models listed

Rinos Co., Ltd.

Rapido Carbide End Mill 161 3 -blade hard -cutting material processing

■ Characteristics ・ Especially, it is effective for difficult materials such as various stainless steel, titanium, inconel, copper, etc. ・ High s...


6 models listed

Rinos Co., Ltd.

Rapido carbide end mill 169 6 -blade hard -cutting material processing

■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), titanium and inconel...


6 models listed

Rinos Co., Ltd.

Rapido Corner Radius Carbide End Mill 166 2 -blade

■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), titanium and inconel...


10 models listed

Rinos Co., Ltd.

Rapido Corner Radius Carbide End Mill 168 4 Blade

■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), titanium and inconel...


10 models listed


Check the product list of Rinos Co., Ltd.

Related Products for Carbide End Mills

Related Products for Machining / Machine Tools

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree