MK Electronics Co., Ltd.'s Wire Processing Systems

■For shielded cables that are difficult to process ・It takes time to extract the core part of the shielded cable. ・Since the processing is detail...

• Machining / Machine Tools

• Wire Processing Systems

Separate speed controller for variable cutting edge. There are standard type and through type. ■Features - Three rotating blades remove film cover...

• Machining / Machine Tools

• Wire Processing Systems

While focusing on basic performance, we achieved the lightest weight with the smallest compact design in the series. This is a standard machine tha...

• Machining / Machine Tools

• Wire Processing Systems

AWG#10 (5.5sq) ~#32 (0.03sq). A compact body with speed suitable for mass production and high productivity. Of course, it also demonstrates its pow...

• Machining / Machine Tools

• Wire Processing Systems

AWG#7 (10sq) ~AWG#28 (0.08sq) Standard wire processing machine. In addition to cutting, stripping, semi-striping, step peeling, and split stripping...

• Machining / Machine Tools

• Wire Processing Systems

An advanced corrugated tube cutting machine. Adopts flat blade guillotine method. The cut of the tube has become even more beautiful. Make the cut ...

• Machining / Machine Tools

• Wire Processing Systems

AWG#2 (30sq) ~AWG#28 (0.08sq) Amazing wide range and high power. A wide processing range from AWG#2 (30sq) to AWG#28 (0.08sq) is achieved with one ...

• Machining / Machine Tools

• Wire Processing Systems

100sq~1.25sq. Ultimate power potential. CASTING C377G drives all eight rollers with independent motors. In addition, all four pairs of rollers are ...

• Machining / Machine Tools

• Wire Processing Systems

AWG#7 (10sq) ~AWG#28 (0.08sq) Captire cable/shield wire processing machine. By cutting the wire with a V-blade and stripping with a special abuttin...

• Machining / Machine Tools

• Wire Processing Systems

This is a device that simultaneously inserts a rubber plug into the wire set in the set position, positions it, and then strips the wire. ■Feature...

• Machining / Machine Tools

• Wire Processing Systems

Built-in variable speed makes it convenient to carry. ■There are two types depending on the applicable wire diameter. ・AGAR1 (Type 02): 0.2 ~ 1.5...

• Machining / Machine Tools

• Wire Processing Systems

■Features ・Wire diameter can be adjusted with speed control function. - Capable of peeling off large diameter enameled wires up to φ7.0.

• Machining / Machine Tools

• Wire Processing Systems

JC4285: Maximum diameter 20mm, JC4385: Maximum diameter 30mm, JC4485: Round cable with maximum diameter of 40mm, and flat cable with maximum width ...

• Machining / Machine Tools

• Wire Processing Systems

A tabletop shield loosening machine that does not scatter dust. The troublesome work of unraveling the mesh shield can be done easily and quickly. ...

• Machining / Machine Tools

• Wire Processing Systems

A stripper that uses a drum brush. Use a fiber or wire brush to remove all coatings, including resin-based ones. Since it uses a drum-shaped brush,...

• Machining / Machine Tools

• Wire Processing Systems

A stripper that uses a rotary cutter. A tabletop stripper that removes film coatings such as enameled wire, polyimide, formal, urethane wire, etc.

• Machining / Machine Tools

• Wire Processing Systems

Enamel removal device for fine lines using a cone brush (glass roll) ■Features ・Quickly removes all film coatings such as enamel, formal, polyimi...

• Machining / Machine Tools

• Wire Processing Systems

Enamel coating removal machine that is portable and convenient for on-site work. Even flat wires can be removed cleanly and quickly. ■Features ・M...

• Machining / Machine Tools

• Wire Processing Systems

An advanced programmable twister equipped with a touch panel and compatible with a wide range of applications. The primary/secondary twisting funct...

• Machining / Machine Tools

• Wire Processing Systems

We have significantly revised the basic functions of electrical wiring printers. MIBU's electrical wiring printer has been completely reborn. Easie...

• Machining / Machine Tools

• Wire Processing Systems

Separator slitter. [For 2 cores] MS-051 [For 3 cores] MS-052 [For 4 cores] MS-053. Adjustable slitter that can slit 2 cores, 3 cores, and 4 cores w...

• Machining / Machine Tools

• Wire Processing Systems

Wire twister with rotation speed control and digital settings (Twister IV supports up to 8sq) The number of twists can also be set using a digital ...

• Machining / Machine Tools

• Wire Processing Systems

The round cable is flattened and can be directly connected to the board. A manual cable fusion machine that is compact and suitable for mass produc...

• Machining / Machine Tools

• Wire Processing Systems

Made by Germany/Vitress Albert ■Features ・Quick open/close type ER type, precision correction PR type, rotary RO type, pipe RA type, etc. ・V-gro...

• Machining / Machine Tools

• Wire Processing Systems

It is effective for terminal processing of multi-core cables. A wire twister that can handle everything from ultra-thin wire to thick wire. ■Featu...

• Machining / Machine Tools

• Wire Processing Systems