All Categories
History
This section provides an overview for low vibration drills as well as their applications and principles. Also, please take a look at the list of 9 low vibration drill manufacturers and their company rankings. Here are the top-ranked low vibration drill companies as of March, 2025: 1.Makita Corporation, 2.DEWALT, 3.Koki Holdings Co., Ltd..
Table of Contents
A low vibration drill is a cutting tool that functions by bit rotation rather than impact as with conventional drills.
Since they do not require impact, low vibration drills significantly reduce noise caused by vibration and impact, resulting in a significantly quieter work environment.
Low vibration drills also reduce the impact on the base material, reducing chipping, scraping, and other damage, and improving the quality of the finished product.
Low vibration drills address the problems that come with conventional drills and are used in many workplaces to facilitate quiet, high-quality drilling.
Low vibration drills are used for work in buildings where people are present because they do not generate noise. In conventional drilling, vibration and impact from blows and noise are generated, requiring adjustments to work days and times. However, with low vibration drills, no noise is generated, making it easier to work even when people are present in the same building.
Low vibration drills are especially useful in buildings where many people gather, such as office buildings, condominiums, and hospitals, and when drilling on concrete walls and floors.
The principle of low vibration drills is that a bit made of diamond or other hard material at the tip of the drill rotates at high speed to perform the drilling process. This minimizes blows, impacts, and vibrations.
In addition, water or gas is sprayed during the operation to cool the frictional heat generated by the high-speed rotation of the bit. This prevents the drill from heating up and allows work to proceed efficiently.
A rubber push portion is also installed to mitigate the push force, further reducing vibration. The size of the bit can also be changed to adjust the size of the hole to be drilled.
The combination of the low vibration drill, the high-speed rotating bit, the cooling system, and the rubber push part allows for efficient drilling while suppressing vibration. The noise and vibration problems that occur with conventional drills have been solved, allowing work to be performed comfortably at a variety of sites.
There are three main types of low vibration drills: diamond core drills, carbide core drills, and hammer drills.
Diamond core drills are drills with a pit made of diamond at the tip. They are suitable for drilling holes in hard materials. They can effectively drill holes in concrete, stone, tiles, etc. Additionally, the high-speed rotation and cooling systems enable accurate drilling with minimal vibration.
Carbide core drills have a tungsten carbide pit at the tip and are more economical than typical low vibration drills. They are suitable for machining concrete, block, and brick, and offers superior durability and cutting performance compared to diamond core drills.
Hammer drills are a type of drill that fall between conventional percussion drills and low vibration drills, and can be operated electrically or pneumatically. They do not have a bit at the tip; instead, drilling is achieved by striking simultaneously with rotation.
As a result, some vibration is generated, but is less than that of conventional impact-type drills. It is mainly suitable for drilling holes in soft materials such as wood, metal, and plastic.
*Including some distributors, etc.
Sort by Features
Sort by Area
Dewalt Inc. is a power tool manufacturing firm started in 1924 by Raymond DeWalt. It began as a small enterprise in Maryland but quickly expanded. They were reformed and reincorporated as DeWalt Inc. in 1947 and were purchased by American Machine & Foundry Co.Inc in 1949. Dewalt Inc. provides a diverse range of products such as power tools, hand tools, accessories, outdoor equipment, and workplace equipment. As of 2001, they produced and sold over 200 hand power equipment and 800 accessories. DeWalt is now a well-known tool brand among commercial contractors.
Koki Holdings Co. Ltd., established in 1948 and based in Tokyo, Japan, is a manufacturer of several power tools, including drilling, cutting, sawing, fastening, and grinding tools. The company began making chemistry equipment in 1954 and launched its first disk grinder in 1957. In 1960, it began making pneumatic tools, and in 1962, it started producing gas engine equipment. It began making printers in 1963 and woodworking machinery in 1969. In 1978, it opened its first overseas subsidiary in West Germany, and in 1979, it opened its first overseas manufacturing subsidiary in Singapore.
Sumake Industrial Co., Ltd., founded in 1997 and based in Taipei City, Taiwan, is a manufacturer and supplier specializing in direct current (DC) and pneumatic tools, as well as compressors. Their product portfolio includes assembly, cordless, electric, and pneumatic tools. Additionally, Sumake offers various types of air compressors, including mini, piston (belt), portable, and screw compressors, along with associated parts and accessories like cast iron pumps (compressor heads). Supporting their production operations, Sumake has a compressor facility, established as a joint venture with Lacmé, a French manufacturer. The company provides workshop equipment, such as air tapping machines, vacuum cleaners, and more.
Gison Machinery Co., Ltd was founded in 1945 and is currently located in Taichung, Taiwan. Gison is a manufacturer of air tools, pneumatic tools, and related equipment for numerous applications including decorating, construction, aerospace, and shipping industries. Tools such as sanders, orbital sanders, grinders, and suction cups for lifting are made as both robotic arm attachments as well as handheld pneumatic devices. Other pneumatic tools include air hammers, screwdrivers & wrenches, dent pullers, and most other standard hand tools or power tools.
ITM Industrial Products Australia, established in 1992 and headquartered in Queensland, South Australia, is a wholesale supplier specializing in tools for industrial, trade, hardware, and other sectors. The company has a diverse product portfolio of 6000 products, encompassing items such as air compressors, benders, cutting tools, generators, and more. These tools cater to industries such as construction, fabrication, and automotive sectors. The company serves clients nationwide, backed by a network of service agents across Australia. ITM offers after-sales support including repairs, spare parts and a minimum one-year warranty for manufacturing defects.
Ranking as of March 2025
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Makita Corporation |
33.3%
|
| 2 | DEWALT |
33.3%
|
| 3 | Koki Holdings Co., Ltd. |
16.7%
|
| 4 | Wuerth Mongolia LLC |
8.3%
|
| 5 | ITM Industrial Products Australia |
4.2%
|
| 6 | GISON Machinery Co., Ltd. |
4.2%
|
Derivation Method
The ranking is calculated based on the click share within the low vibration drill page as of March 2025. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
Newly Established Company
Company with a History
*Including some distributors, etc.
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
Japan
|
2 | 25.0% |
|
United Kingdom
|
2 | 25.0% |
|
United States of America
|
1 | 12.5% |
|
Taiwan
|
1 | 12.5% |
| Mongolia | 1 | 12.5% |
|
Australia
|
1 | 12.5% |
41 products found
41 products
Miyanaga Co., Ltd.
120+ people viewing
■Polyclick series ・3 sizes of shank S.L.X ・Very economical with 3 shanks -Shank auto-locks [just push and turn] ・Compatible with drills with bra...
TOKYO DIAMOND TOOLS MFG.CO.,LTD.
390+ people viewing
Last viewed: 3 hours ago
Standard Response
■ Features ・ Coolant supplies with the center -through structure provide a good drainage, reducing damage to tools and work due to cutting powder,...
Wuhei Seisakusho Co., Ltd.
1170+ people viewing
Last viewed: 1 day ago
Standard Response
■ Use Exterior wall concrete tile removal prevention work ・ Pinning hole is opened ・ Seismic reinforcement work ・ Funa connection anchor hole Re...
8 models listed
TOKYO DIAMOND TOOLS MFG.CO.,LTD.
250+ people viewing
Standard Response
A core drill that simultaneously performs the inner and outer diameter processing of glass and ceramics substrates used for hard disks, contributin...
Kyocera Corporation
120+ people viewing
■Features ・3 mode type with added chisel function ・"Rotation + Blow" "Rotation" "Blow" ・830W, high spec with 26mm hole drilling ・For SDS plus b...
Kyocera Corporation
120+ people viewing
■Features ・830W, high spec with 26mm hole drilling ・2 mode types "Rotation + Strike" "Rotation" ・For SDS plus bit ・One-touch bit installation ...
IKK Co., Ltd.
200+ people viewing
Last viewed: 1 day ago
Standard Response
■Features of this machine - Built-in clutch mechanism prevents gear damage during drilling. -Circuit protector protects the motor from overload cur...
West Co., Ltd.
140+ people viewing
Last viewed: 7 hours ago
Very Fast Response
No-vibration, low-noise, dust-free drilling makes it ideal for construction work from the comfort of your own home. When drilling outside walls, in...
Miniter Co., Ltd.
90+ people viewing
Last viewed: 22 hours ago
Standard Response
■Features - Has a long life and excellent drilling power. - Ideal for drilling holes in highly hard and brittle materials. ■Compatible materials ...
Miyanaga Co., Ltd.
120+ people viewing
Last viewed: 4 hours ago
■Core drill ・Efficient drilling of reinforced concrete walls is required. - In response to the needs of the times, Miyanaga's core bits are a prod...
Miyanaga Co., Ltd.
100+ people viewing
■Core drill ・Efficient drilling of reinforced concrete walls is required. - In response to the needs of the times, Miyanaga's core bits are a prod...
Cains Co., Ltd.
100+ people viewing
Last viewed: 1 day ago
BITURBO SDS-MAX Hammer Drill with more power and speed than the corded type ■Features ・950W class high power ・Lightweight and compact size SDS-M...
Yoshikawa Shoko Co., Ltd.
110+ people viewing
Last viewed: 1 day ago
5.0 Company Review
A core drill especially suitable for light roofs, rib pipes, and ceramic siding. Ideal for drilling holes in hard ceramic siding. ■Compatible mate...
Ueda Co., Ltd.
60+ people viewing
Last viewed: 1 day ago
Standard Response
5.0 Company Review
Ultra-compact, ultra-light, and high power. The feed handle can be exchanged left and right. ■Accessories ・Water treatment pad, water treatment h...
Keuke Kenzai Co., Ltd.
40+ people viewing
Last viewed: 1 hour ago
■Size 40mm
Ueda Co., Ltd.
60+ people viewing
Last viewed: 6 hours ago
Standard Response
5.0 Company Review
Maximum drilling diameter 210mm. With two-speed transmission
Keuke Kenzai Co., Ltd.
40+ people viewing
Last viewed: 1 day ago
■Quantity 0
Ueda Co., Ltd.
50+ people viewing
Standard Response
5.0 Company Review
■Features ・Easy to use due to the smallest and lightest body - Equipped with a high output, low noise motor. ■Applications Drilling pilot holes f...
Ueda Co., Ltd.
80+ people viewing
Last viewed: 1 day ago
Standard Response
5.0 Company Review
■Product details information ・Two-speed transmission approved by professionals ・Built-in clutch function prevents the clutch from slipping and da...
Ueda Co., Ltd.
70+ people viewing
Last viewed: 1 day ago
Standard Response
5.0 Company Review
■Features ・Suitable for highly difficult tasks - Faster drilling than cord type ・Can perform most hole drilling tasks required by users ・No cord...
Ueda Co., Ltd.
70+ people viewing
Standard Response
5.0 Company Review
■Function ・Equipped with REDLINKPLUS intelligence: By constantly monitoring the usage status of the motor and battery, it achieves both long tool ...
Ueda Co., Ltd.
70+ people viewing
Last viewed: 14 hours ago
Standard Response
5.0 Company Review
Main unit only/battery and charger sold separately ■Function ・Can be operated with Milwaukee M18 battery -MILWAUKEE™ POWERSTATE™ brushless motor ...
Ueda Co., Ltd.
70+ people viewing
Last viewed: 1 day ago
Standard Response
5.0 Company Review
Main body only ■ Equipped with an integrated dust collector for drilling with reduced dust ・Lightweight and excellent balance reduces fatigue and...
Orientec Co., Ltd.
60+ people viewing
Last viewed: 21 hours ago
■Summary This drill is suitable for exterior wall repair, interior decoration, rooftop waterproofing work, etc. This machine is dedicated to drilli...
Ueda Co., Ltd.
70+ people viewing
Standard Response
5.0 Company Review
■Features ・New structure of anti-vibration handle By adopting a new structure of anti-vibration handle, vibration transmitted to the operator is r...
Orientec Co., Ltd.
60+ people viewing
Last viewed: 22 hours ago
■Summary This drill is suitable for exterior wall repair, interior decoration, and rooftop waterproofing work. This machine is dedicated to drillin...
Orientec Co., Ltd.
50+ people viewing
■Summary This drill is suitable for water supply and drainage, mechanical equipment installation, and scaffolding connection work. This machine is ...
Orientec Co., Ltd.
50+ people viewing
Last viewed: 18 hours ago
■Summary This drill is suitable for equipment, seismic reinforcement, and scaffolding connection work. This machine is exclusively for medium and l...
Keuke Kenzai Co., Ltd.
30+ people viewing
Last viewed: 21 hours ago
■Size 12
Ueda Co., Ltd.
40+ people viewing
Standard Response
5.0 Company Review
■Product details information ・A model compatible with large-diameter fume pipes with a maximum diameter of 355 m/m. -Fume pipe suction pad and vac...
