Yagyu Shokai Co., Ltd.'s Heating Apparatus

■Features - One side of the heater is magnetized, so it can be easily attached to and removed from metal surfaces. ・A flexible thin planar heating...

• Machining / Machine Tools

• Heating Apparatus

■Features - Thin sheet with excellent thermal response (standard type 1.5mm). ・Flexible. ・Power density of 0.6 to 0.8 W/cm^2 is usually suitable ...

• Machining / Machine Tools

• Heating Apparatus

■Features ・By heating the inside of the can, the viscosity can be kept constant during transfer, and the pump capacity can be reduced. ・This heat...

• Machining / Machine Tools

• Heating Apparatus

■Features - Can be used in large areas or high temperatures. ・Excellent flexibility. ・Silicone blade tape has a ground wire. *Maximum current ca...

• Machining / Machine Tools

• Heating Apparatus

■Features A clean heater made of glass fiber treated with fluororesin. *Please use in conjunction with a temperature controller. *The heat resista...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Displays temperature and time on large dual display. ・With a wide temperature range up to 150℃, it can be used for a variety of applic...

• Machining / Machine Tools

• Heating Apparatus

■Features - For 2L or more, the heater circuit is divided into two circuits, upper and lower. - The heater can heat up to 2/3 of the beaker (for be...

• Machining / Machine Tools

• Heating Apparatus

• Machining / Machine Tools

• Heating Apparatus

■Features When the temperature reaches high temperatures, a flashing light will notify you of the temperature status of the top plate.

• Machining / Machine Tools

• Heating Apparatus

■Features The heater lead wire uses heat-resistant lead wire and has excellent thermal efficiency. *A voltage regulator or temperature regulator i...

• Machining / Machine Tools

• Heating Apparatus

■Features -Digital type allows temperature setting by button input (in 10℃ increments). ・Since it is a ceramic glass plate, it has excellent heat ...

• Machining / Machine Tools

• Heating Apparatus

■Features - The top plate is made of glass ceramic and has strong heat resistance and thermal shock resistance, as well as excellent chemical resis...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Can be used for various heating purposes up to a maximum temperature of 300℃. ・When the top plate becomes hot, the warning lamp will l...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Both models heat up to 871℃ in about 40 minutes. ・A safe design that prevents the bench from getting hot even when used at the highest...

• Machining / Machine Tools

• Heating Apparatus

*Please use a voltage regulator or temperature regulator and keep the temperature below 200℃. *When kept warm, it can be used up to a maximum tempe...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Eight types of aluminum blocks can be selected with a temperature range up to 120℃, so it can be used for a wide range of applications....

• Machining / Machine Tools

• Heating Apparatus

■Features - Stable temperature control is possible with the digital temperature controller. - A K thermocouple is used as the temperature sensor, a...

• Machining / Machine Tools

• Heating Apparatus

■Features ・The main body casing is coated with special powder and has excellent heat and chemical resistance. - The heating wire is hand-woven wit...

• Machining / Machine Tools

• Heating Apparatus

■Features -The main body casing is coated with special powder and has excellent heat and chemical resistance. - The heating wire is hand-woven with...

• Machining / Machine Tools

• Heating Apparatus

■Features Precise temperature adjustment is possible using the PID temperature control method.

• Machining / Machine Tools

• Heating Apparatus

■Features - Ceramic top plate provides excellent durability, heat resistance, and chemical resistance. - High heat resistant type with maximum temp...

• Machining / Machine Tools

• Heating Apparatus

■Features ・When the temperature of the top plate exceeds 50℃, the indicator lamp lights up to prevent accidents such as burns.

• Machining / Machine Tools

• Heating Apparatus

*Be sure to use a temperature regulator or voltage regulator, etc.

• Machining / Machine Tools

• Heating Apparatus

■Features - Flexible and can be installed on piping, etc. - Excellent thermal response and can be used at high temperatures.

• Machining / Machine Tools

• Heating Apparatus

■Summary ・No dust is generated because ordinary insulation materials are not used. -Assembled in a class 1000 clean room. ・You can control the te...

• Machining / Machine Tools

• Heating Apparatus

■Features - Semi-automatic type that allows temperature settings, so stable firing is possible. - Auto-tuning function achieves stable temperature ...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Accurate temperature control is possible with digital PID control and timer function. ・Direct sample temperature control is possible b...

• Machining / Machine Tools

• Heating Apparatus

■Features - Possible to stir while heating. ・Digital PID control allows accurate temperature control. - Stirring speed is maintained at a constant...

• Machining / Machine Tools

• Heating Apparatus

■Features In addition to the MS-DMS/DMSB functions, the stirrer rotation speed is displayed digitally.

• Machining / Machine Tools

• Heating Apparatus

■Features - Built-in temperature regulator allows temperature control. -The casing has an aluminum structure and is powder coated for strong corros...

• Machining / Machine Tools

• Heating Apparatus

■Features ・A mantle heater with a built-in stirrer. - Built-in temperature regulator allows temperature control. *Rotor is not included.

• Machining / Machine Tools

• Heating Apparatus

It is a small size that fits in the palm of your hand. ■Features ・The easy-to-set LCD display makes it easy to check the current temperature, etc...

• Machining / Machine Tools

• Heating Apparatus

■Features 1 Easy-to-configure LCD display It is also easy to check the temperature and elapsed time. 2 Efficient experimental operation The temper...

• Machining / Machine Tools

• Heating Apparatus

It can also be used only by adjusting the temperature and shaking. ■Features 1 Easy-to-configure LCD display It is also easy to check the temperat...

• Machining / Machine Tools

• Heating Apparatus

It is a small size that fits in the palm of your hand. ■Features ・A wide range of temperature settings from low to high temperatures is possible,...

• Machining / Machine Tools

• Heating Apparatus

■Features ・The easy-to-set LCD display makes it easy to check the current temperature and set temperature. ・Heating is done from both the top and...

• Machining / Machine Tools

• Heating Apparatus

■Features 1 Ceramic coating on aluminum top plate. Adopts a surface heater to achieve excellent temperature distribution. 2 Approximately 30 minute...

• Machining / Machine Tools

• Heating Apparatus

■Features 1 Ceramic coating on aluminum top plate. Adopts a surface heater to achieve excellent temperature distribution. 2 Approximately 30 minute...

• Machining / Machine Tools

• Heating Apparatus

■Features -Four-sided heater ensures uniform temperature inside the furnace. - Auto-tuning function achieves stable temperature rise from low to hi...

• Machining / Machine Tools

• Heating Apparatus

■Features The auto-tuning function achieves stable temperature rise from low to high temperatures. *In order to extend the life of the heater wire,...

• Machining / Machine Tools

• Heating Apparatus

■Features - Furnace material is 100% alumina fiber (no RCF). - Maximum temperature can be set to 1,250℃ using a 100V household power supply. - Auto...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Heating operation accuracy is ±2℃ due to closed-loop temperature control by microprocessor. *When using the temperature controller (67...

• Machining / Machine Tools

• Heating Apparatus

■Features 1 compact This is a compact personal type general-purpose electric furnace that is easy to handle. 2 Speedy temperature rise This is a h...

• Machining / Machine Tools

• Heating Apparatus

■Features - Compact, easy-to-handle personal type general-purpose electric furnace. ・Heating can be performed while replacing with inert gas such ...

• Machining / Machine Tools

• Heating Apparatus

■Features - Compact, easy-to-handle personal type general-purpose electric furnace. ・Heat-up time to maximum temperature is approximately 30 minut...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Can also be used as a water bath. - You can set and save 3 heating temperature and time programs. *Aluminum block is not included.

• Machining / Machine Tools

• Heating Apparatus

■Features ・Completely sealed, one-piece construction with explosion-proof properties. ・The outer periphery of the main body is equipped with a he...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Four-sided heater enables uniform and short heating, reaching 900℃ in 15 minutes and 1,100℃ in 25 minutes (at no load). ・Since the doo...

• Machining / Machine Tools

• Heating Apparatus

■Features ・Since the door opens and closes vertically, it saves space and reduces the risk of coming into contact with the back of the door, which...

• Machining / Machine Tools

• Heating Apparatus

■Features -Equipped with a program function of 16 steps and 4 patterns, and it is also possible to change the temperature rise gradient. ・The bloc...

• Machining / Machine Tools

• Heating Apparatus

■Features ・A tape-shaped heater specifically designed for thin pipes. - Easy to install and remove, making it suitable for use in sites where pipi...

• Machining / Machine Tools

• Heating Apparatus

• Machining / Machine Tools

• Heating Apparatus