563 registered Deburring Tools of Rinos Co., Ltd.
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is no need to create a ...
Rinos Co., Ltd.
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no need to create a co...
Rinos Co., Ltd.
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no need to create a co...
Rinos Co., Ltd.
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no need to create a co...
Rinos Co., Ltd.
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no need to create a co...
Rinos Co., Ltd.
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no need to create a co...
Rinos Co., Ltd.
■ Features of WEBA carbide counter sink ・ Weba's unique cut -blade design gives a beautiful finish without chattering. ・ Screwed holes ・ Hole su...
Rinos Co., Ltd.
This is a carbide cutter developed exclusively for difficult cutting materials such as baked steel (~ 60HRC), inconel, hartery, titanium alloy, man...
Rinos Co., Ltd.
■ Characteristics ・ 3 -blade 90 ° Carbide blade type chamfered cutter. ・ The plate seat processing is possible at the same time as the hole chamf...
Rinos Co., Ltd.
A super -hard blade -type chamfered cutter developed exclusively for difficult cutting materials such as baked steel (~ 60HRC), inconel, hatery, ti...
Rinos Co., Ltd.
■ Characteristics ・ It is an internal refueling type of HSS-CO 3 blades that were not before. ・ At the time of mechanical processing, it can be r...
Rinos Co., Ltd.
■ Characteristics ・ No.c19090-2 It is a non-coat specification of the type. ・ Ideal for soft materials such as aluminum from all steel materials.
Rinos Co., Ltd.
It is a chamfered cutter developed exclusively for difficult cutting materials for tonal quality steel (~ 45HRC), manganese steel (Hardox400), Nimo...
Rinos Co., Ltd.
No.19090-1 This is a set of 6 pairs of 90 ° type TIN coat.
Rinos Co., Ltd.
No.19090-2 Tialn coat 90 ° type 6 set set.
Rinos Co., Ltd.
No.19092-0 Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
No.19093-0 Extra Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
No.19092-1 TIN coat long shank 90 ° type 6 set set.
Rinos Co., Ltd.
No.19093-1 Tin Coat Extra Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
■ Characteristics ・ Ideal for materials such as SUS304, SKD11, NAK. ・ The shank part of φ11.5 or more is made of three -sided flat processing, an...
Rinos Co., Ltd.
■ Characteristics ・ Ideal for all steel materials such as SS400, S45C, SCM. ・ The shank part of φ11.5 or more is made of three -sided flat proces...
Rinos Co., Ltd.
■ Characteristics ・ Ideal for aluminum, resin, etc. from all steel materials. ・ The shank part of φ11.5 or more is made of three -sided flat proc...
Rinos Co., Ltd.
It is suitable for brass and plate seats with brass and Nebai material because it takes more niggen amount than the 19090-0 type. * There are othe...
Rinos Co., Ltd.
■ Characteristics ・ Ideal for aluminum, resin, etc. from all steel processing. ・ It is possible to remove precise holes without chattering, secon...
Rinos Co., Ltd.
No.19090-0-MT type TIN coating specification. * There are other part numbers.
Rinos Co., Ltd.
No.19090-0-MT type, so it is suitable for plate sessions such as brass and Nebai materials because it takes more niggen.
Rinos Co., Ltd.
■ Characteristics ・ It is a super extractorong shank type with a 3 -blade 90 °. ・ Prevents interference with jigs and work. ・ Ideal for aluminum...
Rinos Co., Ltd.
■ Characteristics ・ It is an extra shank type with a 3 -blade 90 ° 90 °. ・ Prevents interference with jigs and work.
Rinos Co., Ltd.
No.19093-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a long shank type with a 3 -blade 90 °. ・ Prevents interference with jigs and work. * There are other part numbers.
Rinos Co., Ltd.
No.19092-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ 90 ° type of one blade. ・ It is possible to chameal a wide range of holes from the tip to the maximum diameter.
Rinos Co., Ltd.
No.21711-0 type TIN coating specification.
Rinos Co., Ltd.
No.21711-0-MT type TIN coating specification.
Rinos Co., Ltd.
No.21711-0-MT type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a 90 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
No.21911-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a 90 ° MT type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
No.21911-0-MT type TIN coating specification.
Rinos Co., Ltd.
No.21912-0 type TIN coating specification.
Rinos Co., Ltd.
It is an extra shank type with 90 ° holes.
Rinos Co., Ltd.
No.21913-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ Weba's unique three -blade design will give you a beautiful finish without chattering, and at the same time, it has a long lif...
Rinos Co., Ltd.
■ Characteristics ・ 3 -blade 60 ° carbide blade type chamfered cutter. ・ You can get a beautiful finish without chattering.
Rinos Co., Ltd.
■ Characteristics ・ It is an extra shank type with a 3 -blade 60 °. ・ Prevents interference with jigs and work.
Rinos Co., Ltd.
No.19063-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a 60 ° type of one blade. ・ It is possible to chameal a wide range of holes from the tip to the maximum diameter.
Rinos Co., Ltd.
No.21611-0 type TIN coating specification.
Rinos Co., Ltd.
No.21611-0-MT type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a 60 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
No.21811-0 type TIN coating specification.
Rinos Co., Ltd.
No.21811-0-MT type TIN coating specification.
Rinos Co., Ltd.
No.19075-0-MT type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a 120 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
No.21120-0 type TIN coating specification.
Rinos Co., Ltd.
■ Characteristics ・ It is a cutter that can face the inside and outer surface of the pipe end surface simultaneously. ・ You can adjust the surfac...
Rinos Co., Ltd.
■ Characteristics ・ It is possible to remove a wide range of materials, from soft materials such as copper, aluminum, and soft steel, to cast iron...
Rinos Co., Ltd.
■ Characteristics ・ It is possible to remove a wide range of materials, from soft materials such as copper, aluminum, and soft steel, to cast iron...