TUNGALOY CORPORATION's Threading Tools

■Features ・Applicable to finishing to medium cutting due to deep inclination flute shape ・Achieves excellent machined surface and chip control pe...

• Machining / Machine Tools

• Threading Tools

■Unique high rigidity clamp mechanism ・Clamp mechanism with bottom stopper achieves high cutting edge positioning accuracy ・3-point clamping mech...

• Machining / Machine Tools

• Threading Tools

■Features ・Three-point clamp system achieves high rigidity and excellent repeat position accuracy of the cutting edge ・Guard unused corners ・The...

• Machining / Machine Tools

• Threading Tools

Two types of corner angles and entering angles to enable any machining Double-sided 6-corner insert with corner angles of 80° and 35°. ■Post-grind...

• Machining / Machine Tools

• Threading Tools

■Advantages of Y-axis machining ・Excellent chatter resistance as it receives cutting force in the highly rigid axial direction - Allows chips to f...

• Machining / Machine Tools

• Threading Tools

A new series that solves various problems in stainless steel machining and can be applied to all types of machining. New height general purpose PV...

• Machining / Machine Tools

• Threading Tools

■AH8005 ・M01–M10/S01–S10 ・Grade with excellent wear resistance and adhesion resistance ・Excellent performance in high-speed cutting of heat-resi...

• Machining / Machine Tools

• Threading Tools

Ultimate lifetime stability ■Grade for turning heat-resistant alloys Improved oxidation resistance by adopting new coating film (Al,Ti). Achieves e...

• Machining / Machine Tools

• Threading Tools

■Features ・Excellent welding resistance, wear resistance and excellent chip control. ・Achieves low resistance due to large rake angle and sharp c...

• Machining / Machine Tools

• Threading Tools

■Vibration suppression mechanism When drilling deep holes with long overhangs, BoreMeister has a vibration suppression mechanism built into the too...

• Machining / Machine Tools

• Threading Tools

■BX470 ・Excellent edge sharpness ・Ideal for processing ferrous sintered metals ■BX480 ・The grade with the highest hardness among T-CBN ・Ideal ...

• Machining / Machine Tools

• Threading Tools

■Properties of wood species ・Using an alumina-based binder improves heat resistance and oxidation resistance. Realizes high-speed machining of hea...

• Machining / Machine Tools

• Threading Tools

■BX910 ・Excellent wear resistance during high-speed machining ・Grade for centrifugal casting cast iron machining

• Machining / Machine Tools

• Threading Tools

Coated CBN series covers a wide range of hardened steel processing areas. The most suitable grade can be selected according to the machining area. ...

• Machining / Machine Tools

• Threading Tools

■BXA30 Stably achieves excellent surface roughness by using an ultra-fine CBN base material and a coating with excellent wear resistance and adhesi...

• Machining / Machine Tools

• Threading Tools

■BXM10 Demonstrates excellent performance in high-speed continuous cutting of hardened steel/Coated CBN ■BXM20 First recommended grade for machini...

• Machining / Machine Tools

• Threading Tools

■Three-dimensional breaker “GMR” By combining the 3D breaker “GMR” and the existing insert “GR/L”, it can be applied to a wider range of internal d...

• Machining / Machine Tools

• Threading Tools

■Double clamp mechanism Guarantees reliable insert retention during high-feed machining ■FX105 ceramic grade realizes high-speed machining ・Achie...

• Machining / Machine Tools

• Threading Tools

■A lineup of shank sizes that can be used on cam-type lathes and automatic lathes. ・High rigidity clamp with optimized screw suppresses insert mov...

• Machining / Machine Tools

• Threading Tools

■Features ・Inserts of 4 sizes can be installed in the same holder ・High clamp rigidity achieved by unique clamp mechanism

• Machining / Machine Tools

• Threading Tools

■Features ・Ultra-fine PCD composition provides sharp cutting edges ・Ultra-fine diamond particles are strongly sintered, resulting in less PCD par...

• Machining / Machine Tools

• Threading Tools

■Unique new self-clamp system ・Easy insert replacement and secure fixation ・High rigidity even for lateral feeding ・Since it does not have a pre...

• Machining / Machine Tools

• Threading Tools

Features ■Deep grooving of inner diameter end faces with a minimum end face diameter of ø10 mm and a groove depth of 9 mm is possible. ・Chip flows...

• Machining / Machine Tools

• Threading Tools

■Round piece insert that anyone can reliably index with 6 corners* *If ap = 2 mm or less ・The concave shape on the bottom of the insert and the co...

• Machining / Machine Tools

• Threading Tools

■New outer shape CBN insert ・GNGA type with 70° corner angle ・FNGA type with 45° corner angle ・Chip evacuation is improved by increasing the cle...

• Machining / Machine Tools

• Threading Tools

■New outer shape CBN insert ・GNGA type with 70° corner angle ・FNGA type with 45° corner angle ・Chip evacuation is improved by increasing the cle...

• Machining / Machine Tools

• Threading Tools

■Features ・Ideal for high-precision grooving ・Ideal for shallow groove machining that requires high precision such as circlip grooves ■Groove wi...

• Machining / Machine Tools

• Threading Tools

■HF/HM chip breaker ・Ideal for deep cutting such as carburized layer removal ・Chip breaker shape capable of chip control from high-hardness steel...

• Machining / Machine Tools

• Threading Tools

■HF/HM chip breaker ・Ideal for deep cutting such as carburized layer removal ・Chip breaker shape capable of chip control from high-hardness steel...

• Machining / Machine Tools

• Threading Tools

■HP chip breaker ・Chip breaker ideal for precision finishing of hardened steel ・Optimized chip breaker design reduces cutting resistance on the c...

• Machining / Machine Tools

• Threading Tools

■HS chip breaker ・Chip breaker optimized for low depth of cut and high feed conditions ・Ideal for use under high efficiency machining conditions ...

• Machining / Machine Tools

• Threading Tools

In general turning machining, 75% of machining is performed with a depth of cut of 3 mm or less. ■Chip processing ISO-EcoTurn inserts provide chip...

• Machining / Machine Tools

• Threading Tools

■Features of JS breaker ・3-dimensional breaker that exhibits excellent chip control over a wide range of machining areas ・Large inclination reduc...

• Machining / Machine Tools

• Threading Tools

Features ■Unique high-rigidity clamp grooving/threading tool specialized for small automatic lathes ・V-shaped pocket that securely holds inserts e...

• Machining / Machine Tools

• Threading Tools

■Unification of head size Setup can be changed by simply replacing the head while the shank remains on the machine. ■Excellent repeat position acc...

• Machining / Machine Tools

• Threading Tools

■Creative three-dimensional breaker ・Good chip control is possible in a wide cutting area ・One insert machining is possible from rough machining ...

• Machining / Machine Tools

• Threading Tools

Parallel breaker realizes stable machining in a wide range of cutting areas

• Machining / Machine Tools

• Threading Tools

■Features ・P20–P30/M20–M30 ・New grade for machining small parts with sharp cutting ability ・Achieves high-quality finished surfaces and stable m...

• Machining / Machine Tools

• Threading Tools

■Uses new PVD coating Resistant to peeling even with sharp edges ■ Significantly improves adhesion strength Adopts the latest coating technology ...

• Machining / Machine Tools

• Threading Tools

■Three-dimensional breaker “GMR” By combining the 3D breaker “GMR” and the existing insert “GR/L”, it can be applied to a wider range of internal d...

• Machining / Machine Tools

• Threading Tools

■Ideal shape that maximizes chip evacuation while pursuing high rigidity through structural simulation ・Special alloy steel is used for the holder...

• Machining / Machine Tools

• Threading Tools

■T505 ・Ultra thick coating ・Wear-resistant reinforced Al2O3 coating ・Adopts high hardness outer layer C-rich TiCN ・Newly developed high thermal...

• Machining / Machine Tools

• Threading Tools

■T5105 ・K05–K15 ・Excellent wear resistance and deformation resistance during high-speed continuous cutting. ■T5115 ・K10–K20 ・Achieves stable m...

• Machining / Machine Tools

• Threading Tools

A new series that solves various problems in stainless steel machining and can be applied to all types of machining. New height general purpose PV...

• Machining / Machine Tools

• Threading Tools

■CVD grade for next-generation steel turning Machining efficiency is further improved due to excellent wear resistance and excellent fracture resis...

• Machining / Machine Tools

• Threading Tools

Material type ■Unique 3-point clamp system Unique pocket shape achieves excellent cutting edge positioning accuracy ■Grinding/grooving chip breake...

• Machining / Machine Tools

• Threading Tools

■Features ・Processing diameter range/inner diameter grooving holder ・Lineup of 3 types of cutting edge shapes ・Highly rigid clamp realized by un...

• Machining / Machine Tools

• Threading Tools

Features ■Easy to replace inserts with front operation By operating the lever from the front, insert replacement time is greatly reduced. Reduce ma...

• Machining / Machine Tools

• Threading Tools

■Features of external thread cutting tool with high pressure coolant specification ・High efficiency achieved by supplying coolant from two directi...

• Machining / Machine Tools

• Threading Tools

■Reducing the number of tools used - Possible to drill forged holes, cast holes, and flat surfaces without center holes. ・After drilling a hole in...

• Machining / Machine Tools

• Threading Tools

■High clamp rigidity Stable life and accuracy ■Compatible with high pressure coolant (TungTurn-Jet) Dramatically improve insert life Main chip br...

• Machining / Machine Tools

• Threading Tools

■High clamp rigidity Stable life and accuracy ■Compatible with high pressure coolant (TungTurn-Jet) Dramatically improve insert life Main chip br...

• Machining / Machine Tools

• Threading Tools

■Features ・Double clamp type internal oil supply holder ・Lever lock type (nozzle type) internal oil supply holder

• Machining / Machine Tools

• Threading Tools

■Double clamp Inserts are firmly clamped using a double clamp method using a tightening screw and a presser foot. High rigidity has been achieved f...

• Machining / Machine Tools

• Threading Tools

■Simple and strong double clamp system ・Achieves high clamping strength with a single screw ・Double clamp that pulls in and holds down with just ...

• Machining / Machine Tools

• Threading Tools

■Highly economical double-sided 10 corner specification Overwhelming tool costs can be reduced compared to the corner unit price of ISO inserts. ■...

• Machining / Machine Tools

• Threading Tools

■Deep cutting up to 0.8 mm possible Increased machining efficiency by reducing the number of passes ■Epoch-making wave brazing Even during dry mac...

• Machining / Machine Tools

• Threading Tools

■New outer shape CBN insert ・GNGA type with 70° corner angle ・FNGA type with 45° corner angle ・Chip evacuation is improved by increasing the cle...

• Machining / Machine Tools

• Threading Tools

Features ■Ideal for a wide range of processing applications Expand the machining area with taper machining, undercut machining, V-groove machining,...

• Machining / Machine Tools

• Threading Tools