Okumura Machinery Co., Ltd.'s Cutting Machinery

■The circular saw is covered with a cover and can perform cutting work at high speed and safely. Undercut cutting machine for aluminum shapes The `...

2 models listed

• Machining / Machine Tools

• Cutting Machinery

3DX type tipped saw with low cutting resistance and high-speed cutting. We can handle a wide range of materials, from aluminum billets to building ...

• Machining / Machine Tools

• Cutting Machinery

■Manual radial arm saw. Commonly known as "sasher" in sash shops. Beautiful cut surface with a chip saw. Can also cut wood and PVC pipes The AC-300...

• Machining / Machine Tools

• Cutting Machinery

■A radial saw whose main body is entirely made of thick cast iron, allowing you to make beautiful cuts easily and accurately. ``RADIAL-ACA-300'' is...

• Machining / Machine Tools

• Cutting Machinery

■Free cross cut saw that can cut 120 mm in height x 450 mm in width in one shot, and can also cut at angles and also raise and lower the height of ...

• Machining / Machine Tools

• Cutting Machinery

■Front armless type improves work efficiency. Upper saw down cutting allows for accurate and beautiful cut surfaces on the facing material. The ACP...

• Machining / Machine Tools

• Cutting Machinery

■Able to cut thick shapes with high output motor. Front armless type with no burrs on the surface material improves work efficiency The "Power Cros...

• Machining / Machine Tools

• Cutting Machinery

``ACPKF-300 type (front armless type)'' is a fully automatic cutting machine with an automatic sizing feeding device. The cutting precision can be ...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine that can produce up to 45 degrees of shaft inclination and does not produce burrs on face materials. Front armless ty...

• Machining / Machine Tools

• Cutting Machinery

■Two axes can be cut simultaneously with a maximum distance of 6,000 mm. Can cut up to 500mm width at one time with horizontal sliding cutter.

• Machining / Machine Tools

• Cutting Machinery

■High-speed positioning and high-speed cutting improve cutting work productivity. - Significantly improves productivity by speeding up cycle operat...

• Machining / Machine Tools

• Cutting Machinery

■D2 type tipped saw that focuses on sawing with less burrs. Suitable for cutting thin-walled aluminum building material sashes and frame shapes The...

• Machining / Machine Tools

• Cutting Machinery

■High-speed cutting of 50mm square resin moldings (shapes) in one shot. Cuts PVC resin angles, pipes, moldings, etc. at high speed with a chip saw....

• Machining / Machine Tools

• Cutting Machinery

■JCU-510D realizes precise angle cutting with free rotation of up to 60 degrees left and right. Compact design allows cutting of aluminum profiles,...

• Machining / Machine Tools

• Cutting Machinery

■Free automatic angle cutting machine that can automatically rotate the table up to 63 degrees left and right. Compact design, can cut aluminum sha...

• Machining / Machine Tools

• Cutting Machinery

■One-shot high-speed cutting of maximum 200A pipes Cuts PVC and PP molded materials (resin sashes, plumbing pipes, etc.) at high speed with a tip s...

• Machining / Machine Tools

• Cutting Machinery

■Accurate positioning is possible. A cutting machine that automatically rotates left and right ±60 degrees. The "JSKH-DM455 model" is a fully autom...

• Machining / Machine Tools

• Cutting Machinery

■The fully automatic radial saw is a heavy-duty grooving machine with a main shaft equipped with a grooving cutter that automatically creates horiz...

• Machining / Machine Tools

• Cutting Machinery

■Two-axis groove processing machine with automatic feed that processes the top and bottom grooves of partition panel materials in one process. “ORC...

• Machining / Machine Tools

• Cutting Machinery

This is a circular saw cutting machine exclusively for ceramic exterior wall materials. Highly rigid top running allows for beautiful finished prod...

• Machining / Machine Tools

• Cutting Machinery

■Cutting and chamfering can be done in one cut. Running saw specifically for siding boards This is a circular saw cutting machine exclusively for c...

• Machining / Machine Tools

• Cutting Machinery

■Equipped with a material pusher to automate circular saw cutting work This machine is a device that automatically cuts aluminum extrusion shapes. ...

• Machining / Machine Tools

• Cutting Machinery

■Aluminum cutting, a new frontier of precision and safety. Opening up the future with UCA-2D400 "UCA-2D400" is an innovative 3D circular saw cuttin...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine with table rotation + blade tilting type, suitable for angle cutting of aluminum shapes. Accurately and safely perfor...

• Machining / Machine Tools

• Cutting Machinery

■Energy-saving and compact cutting machine with a built-in simple dust collector now compatible with the [Tax system for strengthening small and me...

• Machining / Machine Tools

• Cutting Machinery

■Safely and reliably cuts aluminum sashes at angles. Innovate work efficiency with undercut type chip saw cutting machine The "UCA-D400 model" is a...

• Machining / Machine Tools

• Cutting Machinery

■The "UCA-DM400 model" achieves precise angle cutting by turning up to 60 degrees left and right. Supports a wide variety of aluminum processing wi...

• Machining / Machine Tools

• Cutting Machinery

■ Revolutionize work efficiency with automation of angle cutting. Precision 45 degree cutting realized by UCA-DM500 The "UCA-DM500 model" is a long...

• Machining / Machine Tools

• Cutting Machinery

■Precision cutting, safe operation - challenge the angle with the axis tilting plate UCA-SD300 A compact machine with a tilting handle axis that pr...

• Machining / Machine Tools

• Cutting Machinery

■The circular saw is covered with a cover and can perform cutting work at high speed and safely. Copper bar cutting machine that can handle up to 3...

• Machining / Machine Tools

• Cutting Machinery

■Leave the aluminum cutting to us, from shapes to pipe rods and Max500 square plates. Semi-automatic cutting machine with a front reference ruler t...

• Machining / Machine Tools

• Cutting Machinery

■Characteristics of UCA-CHMS3000 type carbide circular saw cutting machine with horizontal chuck type automatic feed ・High-speed, high-precision s...

• Machining / Machine Tools

• Cutting Machinery

■Automatic undercut saw that efficiently cuts large quantities of aluminum shapes and solid materials. The carbide circular saw cutting machine UCK...

• Machining / Machine Tools

• Cutting Machinery

■This is a cutting machine that can cut long materials quickly, safely and accurately. Safe work can be done as the cover is fixed with an upper cl...

• Machining / Machine Tools

• Cutting Machinery

■Equipped with fast forwarding function to reduce air cut time Circular saw cutting machine with fast forwarding function "UCK-T400H model" The cir...

• Machining / Machine Tools

• Cutting Machinery

■Circular saw cutting machine that is equipped with a blade vertical adjustment mechanism and can perform grooving. ・One-shot cutting of maximum w...

• Machining / Machine Tools

• Cutting Machinery

■Accurate positioning and simple input procedures using a uniquely developed dedicated microcomputer The "VM22 model" is a V-cut machine that can c...

• Machining / Machine Tools

• Cutting Machinery