Monolithic Power Systems, Inc.

■Summary The MP44014-A is a boundary conduction mode PFC controller that provides simple, high-performance active power factor ...

• Controllers

• Power Factor Correction (PFC) Equipment

■Summary MP6919 is a fast turn-off intelligent rectifier for flyback converters with integrated 100V MOSFET. Achieves higher ef...

• Diodes

• Rectifiers

■Summary MPQ2026A-AEC1 is a dual channel low dropout (LDO) regulator. It includes a boost preregulator operating at 400kHz or 2...

• Transformers

• Bulk Converters

■Summary The MPQ6526 is a six half-bridge DMOS output driver with integrated power MOSFETs that can drive up to six different l...

• Power Supplies

• Motor Drivers

■Summary The MP8102 is a rail-to-rail output operational amplifier in a TSOT-23 package. This amplifier provides a bandwidth of...

• Amplifiers

• Operational Amplifiers

■Summary MPQ6411 is a window watchdog timer. Used to reset and monitor the microcontroller. In normal operation, the MCU sends ...

• Integrated Circuits

• System Reset ICs

■Summary MEZS7-1SSAPowerBank is a complete mobile battery solution module using MP2632 that includes a buck charger with BC1.2 ...

• Power Supplies

• LED Drivers

■Summary The MP5610 is a dual output converter with a 2.7V to 5.5V input for bias powering small LCD panels. Peak current mode ...

• Power Supplies

• Power Supply Modules

■Summary MP6605C is a 4-channel low-side driver IC with I2C interface. Integrates a low-side MOSFET (LS-FET) and a high-side (H...

• Power Supplies

• Motor Drivers

■Summary The MPQ18021HN-A is a high frequency, 100V half-bridge, N-channel power MOSFET driver. The low-side and high-side driv...

• Power Supplies

• Isolated Gate Drivers

■Summary The HR1210 is a multimode PFC and current mode LLC combo controller controlled via a UART interface. This power-saving...

• Converters & Transducers

• ADCs

■Summary The MCS1800 is a linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential and ca...

• Sensors

• Current Sensors

■Summary The MP6539C is a gate driver IC designed for three-phase brushless DC (BLDC) motor driver applications. It can drive t...

• Power Supplies

• Isolated Gate Drivers

■Summary The MP3313 is a step-up, white LED converter. The MP3313 uses peak current mode and 3-channel current sink to regulate...

• Power Supplies

• LED Drivers

■Summary The MP6003 is a monolithic flyback DC/DC converter that can deliver up to 15W of output power with a 150V power switch...

• Converters & Transducers

• DC To DC Converters

■Summary The MP5098 is a 12V/5V, low quiescent current (low quiescent current), low on-resistance (RDS (ON)), dual channel elec...

• Safety Devices

• Fuses

■Summary The MPQ1925 is a high frequency, N-channel MOSFET, half-bridge gate driver. The device's low-side MOSFET (LS-FET) and ...

• Power Supplies

• Isolated Gate Drivers

■Summary The MP6004 is a monolithic flyback DC/DC converter with 180V power switch targeting isolated or non-isolated 13W PoE a...

• Converters & Transducers

• DC To DC Converters

■Summary MPQ4487A integrates a monolithic step-down switch mode converter with two USB current limit switches and a Type-C 5V@3...

• Converters & Transducers

• DC To DC Converters

■Summary The MPQ7200A is a fixed frequency, constant current, buck-boost LED driver with integrated power MOSFET. The MP2332 is...

• Power Supplies

• LED Drivers

■Summary The MP18021 is a high frequency, 100V, half-bridge, N-channel power MOSFET driver. Its low-side and high-side driver c...

• Power Supplies

• Isolated Gate Drivers

■Summary The MP6612 is an H-bridge motor driver used to drive reversible motors, which can drive DC motors, stepper motor windi...

• Power Supplies

• Motor Drivers

■Summary The MPQ3326-AEC1 is a 16-channel white LED driver that operates over a wide input voltage range of 4V to 16V. The MPQ3...

• Power Supplies

• LED Drivers

■Summary HR1203 is a high-performance controller that integrates an advanced digital PFC controller and a half-bridge LLC reson...

• Converters & Transducers

• ADCs

■Summary The MPQ4487 integrates a monolithic step-down switch mode converter with two USB current limit switches for each port ...

• Converters & Transducers

• DC To DC Converters

■Summary The mEZD41501A-A is an open frame 2.7-4.2V input step-up power module with 1A continuous output current and 5V output ...

• Transformers

• Boost Regulators

■Summary The MP6615 is an H-bridge DC motor driver with a full bridge consisting of four N-channel power MOSFETs. The device al...

• Power Supplies

• Motor Drivers

■Summary The MP2926 is a triple-loop, digital, multiphase controller that powers memory and SoC. Works with MPS's Intelli-Phase...

• Converters & Transducers

• DC To DC Converters

■Summary The MP3367 is a 6-channel current source step-up converter designed to drive white LED arrays as backlights for small ...

• Power Supplies

• LED Drivers

■Summary The MPQ7225A-AEC1 is a 16-channel, current-sinking LED driver. Each channel has a current rating of up to 200mA, and 1...

• Power Supplies

• LED Drivers