Riken Kiki Co., Ltd.

The manual pump and cylinder are integrated and can be used in any direction. It can be used for multiple purposes by changing ...

• Pumps

• Hydraulic Pumps

A thin jack with a maximum working pressure of 70MPa. All models are single acting spring return type. Cylinder tube and piston...

• Drive Mechanisms & Components

• Cylinders

Comes with inner plating for piston and cylinder tube.

• Drive Mechanisms & Components

• Cylinders

Comes with inner plating for piston and cylinder tube. Comes with a special head cover. This is a short type with a reduced min...

• Drive Mechanisms & Components

• Cylinders

Adoption of a magnetic motor results in significantly lower noise compared to conventional types, and further improves durabili...

• Pumps

• Hydraulic Pumps

Comes with inner plating for piston and cylinder tube.

• Drive Mechanisms & Components

• Cylinders

This type has a through hole in the center of the piston, and can be used in various tensile tests and tension devices. SC6-20 ...

• Drive Mechanisms & Components

• Cylinders

There is free flow from port 1 to port 2, but reverse flow is possible by opening the bypass side. Turning the handle clockwise...

• Valves

• Check Valves

This is a pressure gauge that can be used with tap water as the working fluid. Because it is a universal screw, the direction o...

• Meters & Instruments

• Pressure Gauges

It is very convenient as it allows you to easily make holes as needed in panels, boxes, etc. It is especially effective at work...

• Machining / Machine Tools

• Hydraulic Hole Punchers

The switch itself has an interlock circuit built into it.

• Switches

• Switch Buttons

Both ends have R (male thread) fittings. Basically, it is used by attaching the H side coupler to one side.

• Polymeric Materials

• Nylon Tubing

This type has a through hole in the center of the piston, and can be used in various tensile tests and tension devices.

• Drive Mechanisms & Components

• Cylinders

The feature is that there is little pressure fluctuation. When adjusting the pressure, loosen the lock nut and gradually turn t...

• Valves

• Control Pressure Valves

Allows oil to pass in one direction above cracking pressure and prevents backflow.

• Valves

• Check Valves

Two types are available depending on the application.

• Switches

• Operation Switches

Hydraulic bolt tensioners use cylinders to apply tension to bolts and stud bolts, and use their elasticity to apply a certain t...

• Fastening Components

• Bolt & Stud Tensioners

A lightweight and easy-to-operate alternative to manual pumps. It can also be used with Panasonic nickel metal hydride batterie...

• Pumps

• Hydraulic Pumps

• Pumps

• Hydraulic Pumps

The flow rate can be adjusted by restricting the pressure oil passage with a needle. As temperature and pressure change, the fl...

• Valves

• Needle Valves

This is a manual pump with a maximum working pressure of 100MPa, and has a two-speed function that automatically switches betwe...

• Pumps

• Hydraulic Pumps

■Features - A pump powered by a gasoline engine that can replace electric pumps or manual pumps at work sites where there is no...

• Pumps

• Pumping Engines

• Pumps

• Hydraulic Pumps

This is an attachment for pulling out bearings using the two claws (F2 type) of a coupling puller. Can also be used for gears, ...

• Machining / Machine Tools

• Pullers

With piston plating.

• Drive Mechanisms & Components

• Cylinders

• Pumps

• Hydraulic Pumps

Reverse flow is enabled by applying a pressure 1/11 of the secondary side pressure to the pilot pressure port. If there is pres...

• Valves

• Check Valves

Superior durability compared to standard cylinders. Please use this when it is used frequently. All models do not come with a c...

• Drive Mechanisms & Components

• Cylinders

Pressure can be easily set without tools. The adjustable screw allows the pressure switch to be installed without turning the d...

• Switches

• Pressure Switches

• Pumps

• Hydraulic Pumps