Riken Kiki Co., Ltd.

This is a manual pump that can boost the pressure to ultra-high pressures of 300MPa and 400MPa. Work efficiency can be improved...

• Pumps

• Hydraulic Pumps

The manual pump and cylinder are integrated and can be used in any direction. It can be used for multiple purposes by changing ...

• Pumps

• Hydraulic Pumps

The feature is that there is little pressure fluctuation. When adjusting the pressure, loosen the lock nut and gradually turn t...

• Valves

• Control Pressure Valves

A thin jack with a maximum working pressure of 70MPa. All models are single acting spring return type. Cylinder tube and piston...

• Drive Mechanisms & Components

• Cylinders

• Pumps

• Hydraulic Pumps

This type has a through hole in the center of the piston, and can be used in various tensile tests and tension devices. SC6-20 ...

• Drive Mechanisms & Components

• Cylinders

Mainly used for electric pumps such as EMP-5SW, EMP-6SW (SB), MP-10SW (SB), MP-12SW (SB), MP-15S, etc. A push button switch is ...

• Controllers

• Control Panels

It is very convenient as it allows you to easily make holes as needed in panels, boxes, etc. It is especially effective at work...

• Machining / Machine Tools

• Hydraulic Hole Punchers

■Features - A pump powered by a gasoline engine that can replace electric pumps or manual pumps at work sites where there is no...

• Pumps

• Pumping Engines

Comes with inner plating for piston and cylinder tube.

• Drive Mechanisms & Components

• Cylinders

A lightweight and easy-to-operate alternative to manual pumps. It can also be used with Panasonic nickel metal hydride batterie...

• Pumps

• Hydraulic Pumps

This is a manual pump with a maximum working pressure of 100MPa, and has a two-speed function that automatically switches betwe...

• Pumps

• Hydraulic Pumps

• Pumps

• Hydraulic Pumps

Comes with inner plating for piston and cylinder tube.

• Drive Mechanisms & Components

• Cylinders

Various pulleys, gears, etc. can be easily removed. 2-jaw and 3-jaw types are available for 100kN, 200kN, and 500kN, respectively.

• Machining / Machine Tools

• Pullers

Both ends have R (male thread) fittings. Basically, it is used by attaching the H side coupler to one side.

• Polymeric Materials

• Nylon Tubing

This is a pressure gauge that can be used with tap water as the working fluid. Because it is a universal screw, the direction o...

• Meters & Instruments

• Pressure Gauges

• Pumps

• Hydraulic Pumps

This is the industry's first CE marking compliant Digipressure. This single product has both pressure display and pressure swit...

• Switches

• Pressure Switches

The switch itself has an interlock circuit built into it.

• Switches

• Switch Buttons

Comes with inner plating for piston and cylinder tube. Comes with a special head cover. This is a short type with a reduced min...

• Drive Mechanisms & Components

• Cylinders

Hydraulic bolt tensioners use cylinders to apply tension to bolts and stud bolts, and use their elasticity to apply a certain t...

• Fastening Components

• Bolt & Stud Tensioners

Two types are available depending on the application.

• Switches

• Operation Switches

• Pumps

• Hydraulic Pumps

This type has a through hole in the center of the piston, and can be used in various tensile tests and tension devices.

• Drive Mechanisms & Components

• Cylinders

• Pumps

• Hydraulic Pumps

There is free flow from port 1 to port 2, but reverse flow is possible by opening the bypass side. Turning the handle clockwise...

• Valves

• Check Valves

With piston plating.

• Drive Mechanisms & Components

• Cylinders

This is an attachment for pulling out bearings using the two claws (F2 type) of a coupling puller. Can also be used for gears, ...

• Machining / Machine Tools

• Pullers

Pressure can be easily set without tools. The adjustable screw allows the pressure switch to be installed without turning the d...

• Switches

• Pressure Switches