Price (excluding tax)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Altitude
Compressed air supply or nitrogen gas
Environmental conditions (en 61,010)
Excluding dimensions master devices (length x width x height)
Filling mode
Minimum sample amount
Operating temperature
Overvoltage category
Pollution
Power supply part
Product No
Required air quality
Standard time required for filling/measuring cycles
Viscosity range
Weight (excluding master devices)
Part Number
Xsample 330 (High-Resistance)Handling Company
Anton Paar GmbHItems marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Altitude | Compressed air supply or nitrogen gas | Environmental conditions (en 61,010) | Excluding dimensions master devices (length x width x height) | Filling mode | Minimum sample amount | Operating temperature | Overvoltage category | Pollution | Power supply part | Product No | Required air quality | Standard time required for filling/measuring cycles | Viscosity range | Weight (excluding master devices) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | Up to 3,000 m | Up to 2 BAR (relative pressure) | Limited use of indoor use | 205 mm x 148 mm x 205 mm | One -way suction mode, one -way suction and reverse suction | Approximately 10 ~ 20 ml | 15 ~+35 ℃ | II | 2 | Supplies from the master device, the AC power supply voltage is the technical specification nameplate on the back of the master device (protection earth required) | 184370 | ISO 8,573-1 Class 3 compliant: Maximum particle size: 5 μm, maximum pressure dew point: -20 ° C, maximum oil content: 1 mg/m³ | 2-5 minutes | Up to 3,000 mpa • S in the peripheral temperature and measurement temperature (if the viscosity of the sample exceeds 500 mpa • s at the peripheral temperature and measurement temperature, bubbles may occur at the time of filling.) | Approximately 3.8 kg |