Compatible with various samples single sample changer Xsample 330
Anton Paar GmbH
About This Product
■ A single sample changer for various samples
・ In addition to the new peristalic pump of the industrial grade, the XSAMPLE 330, which is equipped with an automatic cleaning function, is the best unit for continuous measurement of various low viscosity samples with completely different characteristics.
・ When the measurement is completed, the sample is emitted or recovered, and the system is automatically cleaned with up to two types of cleaning solution. The drying is operated by the operator. The following sample measurement cells can be perfectly prepared.
■ Automatic cleaning
・ Automatic cleaning and drying every time a sample measurement -perfect measurement preparation
・ Each cleaning procedure can use up to two types of cleaning agents
・ Set the cleaning procedure in detail and improve the efficiency of measurement work
■ Compatible with various samples
・ By filling with a recipient pump, it supports a wide range of sample viscosity up to 3.000 mpa.s.S.
・ All of the durable materials are durable so that corrosive samples (phosphoric acid, trichlorolac acid, etc.) can be handled.
・ Perfect measurement result by filling mode that can be adjusted according to the type of sample
■ Handling of efficient samples, simple operation
・ Measurement with minimum samples according to the scale of the system
・ Easy operation with a user interface built into the master device
・ Measurement in the same procedure regardless of the viscosity of the sample -Stop filling operation by sensor control
・ Automatic sample collection device -Collected expensive samples, dangerous samples into vials
■ Compatible device
・ DMA
・ Lovis2000 m/me
-
Product
Compatible with various samples single sample changer Xsample 330
-
Handling Company
Anton Paar GmbH
2 Models of Compatible with various samples single sample changer Xsample 330
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Altitude | Compressed air supply or nitrogen gas | Environmental conditions (en 61,010) | Excluding dimensions master devices (length x width x height) | Filling mode | Minimum sample amount | Operating temperature | Overvoltage category | Pollution | Power supply part | Product No | Required air quality | Standard time required for filling/measuring cycles | Viscosity range | Weight (excluding master devices) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
XSAMPLE 330 |
Available upon quote | Up to 3,000 m | Up to 2 BAR (relative pressure) | Limited use of indoor use | 205 mm x 148 mm x 185 mm | One -way suction mode, one -way suction and reverse suction | Approximately 10 ~ 20 ml | 15 ~+35 ℃ | II | 2 | Supplies from the master device, the AC power supply voltage is the technical specification nameplate on the back of the master device (protection earth required) | 184370 | ISO 8,573-1 Class 3 compliant: Maximum particle size: 5 μm, maximum pressure dew point: -20 ° C, maximum oil content: 1 mg/m³ | 2-5 minutes | Up to 3,000 mpa • S in the peripheral temperature and measurement temperature (if the viscosity of the sample exceeds 500 mpa • s at the peripheral temperature and measurement temperature, bubbles may occur at the time of filling.) | Approximately 3.7 kg |
|
|
Xsample 330 (High-Resistance) |
Available upon quote | Up to 3,000 m | Up to 2 BAR (relative pressure) | Limited use of indoor use | 205 mm x 148 mm x 205 mm | One -way suction mode, one -way suction and reverse suction | Approximately 10 ~ 20 ml | 15 ~+35 ℃ | II | 2 | Supplies from the master device, the AC power supply voltage is the technical specification nameplate on the back of the master device (protection earth required) | 184370 | ISO 8,573-1 Class 3 compliant: Maximum particle size: 5 μm, maximum pressure dew point: -20 ° C, maximum oil content: 1 mg/m³ | 2-5 minutes | Up to 3,000 mpa • S in the peripheral temperature and measurement temperature (if the viscosity of the sample exceeds 500 mpa • s at the peripheral temperature and measurement temperature, bubbles may occur at the time of filling.) | Approximately 3.8 kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Anton Paar GmbH
View more products of Anton Paar GmbH
About Company Handling This Product
- Austria