A high -cleaning ability multi -changer XSAMPLE 530
Anton Paar GmbH
About This Product
■ Multi -sample changer -high cleaning ability
・ The XSAMPLE 530 sample changer can handle samples of various characteristics, targeting all Anton Pearl master devices.
・ By controlled filling processing, all samples can be filled in the shortest time, from water (up to 36,000 mpa.s) to high viscosity oil. A 71 sample magazine for autonomous driving can be replaced with one hand and is easy to process and fill.
・ Since up to three types of reagents can be used, a wide range of samples can be measured in one operation. Composable machine parts, high chemical resistance, and excellent robustness increase the operating time of the system and reduce maintenance costs.
■ The perfect measurement result is from perfect cleaning
・ Automatic cleaning and drying every time a sample measurement -perfect measurement preparation
・ Use up to 3 types of solvent in any order to achieve ideal cleaning performance
・ Perform active needle cleaning on the inside and outside to prevent secondary pollution of samples.
・ Specify a sample that requires special handling as an advanced setting to improve work efficiency.
■ Simple workflow that realizes an easy -to -work environment
・ Removable magazine that is easy to collect samples: 71 (12 ml vial) or 35 (45 ml vials) samples
・ Adjust the magazine according to various vials to achieve unwanted workflow in the lab.
・ Measure the sample seamlessly in standard mode of software that can be used intuitively
-A optional barcode reader prevents numerical input mistakes and automate method assignments.
■ Intelligent confirmation and procedures according to individual requirements
・ Automatic sample collection device (optional accessories) collects expensive samples and dangerous samples into vials
・ Even in low viscosity samples or up to 36,000 mpa.s.S high viscosity samples (by sensor control), filling and draining are automatically executed.
・ Prevents secondary pollution of sample by automatic air check before measurement
・ Safety and reliable operation by automatic testing of pressure and sealing
■ Compatible device
・ MODULYZER
・ DMA
・ SVM2001
・ SVM3001
・ SVM3001 Cold Properties
・ SVM4001
・ Lovis2000 m/me
-
Product
A high -cleaning ability multi -changer XSAMPLE 530
-
Handling Company
Anton Paar GmbH
1 Models of A high -cleaning ability multi -changer XSAMPLE 530
| Product Image | Part Number | Price (excluding tax) | Automatic filling and drying | Cleaning liquid consumption per cycle | Compressed air supply or nitrogen gas (optional) | Dimensions (excluding master devices) (length x width x height) | Environmental conditions (en 61,010) | Filling mode | Humidity | Number of sample vials | Operating temperature | Optional barcode reader | Power supply part | Requirements of compressed air | Sample amount per measurement | Sample collection | Sample loopput | Viscosity range | Weight (excluding master devices) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
230332 |
Available upon quote | Piston pump, built -in air pump of master device, or compressed air can be selected | About 4ml | External compression air of 1.80 to 2.20 BAR (relative pressure), standard value: 2.0 BAR (relative pressure) | 370 mm x 490 mm x 430 mm | Limited use of indoor use |
Pressure mode: Use of integrated piston pumps, air pumps for master devices, compressed air Sucking mode (optional) |
Relative humidity 10-90 %, no condensation | 71 (12 ml vial), options: 35 (45 ml vials), compatible with user -specific magazines according to requests | +15 ~+35 ℃ | Laser line scanner, class 2 1D code reader | Supplies from the master device, the main power supply voltage, see the nameplate on the back of the master device (protection earth required) | ISO 8,573-1 Class 3 Compatible: Maximum particle size: 5 μm, maximum pressure dew point: -20 ° C, maximum oil content: 1 mg/m3 | It depends on the system configuration of about 3 ml (using DMA ™ M as a master device) | option | Up to 9 per hour, depending on the application and the pressure source used |
When using built -in air pump: 12.000 mpa.s in the peripheral temperature and measurement temperature 2 When using the external compression air of BAR: 36.000 mpa.s in the peripheral temperature and measurement temperature |
Approximately 48 kg |
Customers who viewed this product also viewed
Other products of Anton Paar GmbH
View more products of Anton Paar GmbH
About Company Handling This Product
- Austria