Compatible with various sizes of syringes with one unit Sample changer Xsample 340-164759
Compatible with various sizes of syringes with one unit Sample changer Xsample 340-Anton Paar GmbH

Compatible with various sizes of syringes with one unit Sample changer Xsample 340
Anton Paar GmbH


About This Product

■ Compatible with various sizes of syringes with one sample changer ・ Xsample 340 is a single sample changer that supports various types of syringes. You can automatically fill any master device of Anton Pearl in your syringe. ・ Because the filling speed can be adjusted, it is possible to measure with complete filling and excellent accuracy. The robust and rational design guarantees a long -term and long -term operation without trouble. ・ The XSAMPLE 340 automatically performs the measurement preparation using up to two types of cleaning agents. Therefore, you can secure complete measurement conditions without relying on operators or samples. ■ The perfect measurement result is from perfect cleaning ・ By automatically cleaning and drying after each sample, you can prevent sample carryover and obtain accurate measurement results. ・ Each cleaning procedure can use up to two types of cleaning agents ・ A very wide range of samples can be measured from low -viscosity sample to up to 36,000 mpa.s.S high viscosity samples ・ Prevents secondary pollution of sample by automatic air check before measurement ■ Easy operation ・ Adapters tailored to 2.5 ml and 10 ml of BRAUN syringe that are frequently used ・ Measured with minimal samples according to the scale of the system -Recommended for expensive samples and dangerous samples ・ Integrated software screen in the master device -Easy operation and can be mastered in a short period of time ・ Adjust the filling speed with a force sensor -Optimize filling operation and prevent erroneous operations ■ Intelligent equipment design ・ All of the envelopes are durable so that corrosive samples can be handled. ・ Robust device that can be measured under harsh environmental conditions ・ High -level safety: When the cover is opened, the sample collection is automatically stopped to protect the operator ・ Designed that can be installed immediately even in small places, a message display that is easy to understand even for the first time ■ Compatible device ・ MODULYZER ・ DMA ・ SVM2001 ・ SVM3001 ・ SVM3001 Cold Properties ・ SVM4001 ・ Lovis2000 m/me ■ Related products ・ Xsample530 ・ Xsample320 ・ XSAMPLE330 ・ XSAMPLE520 ・ Heat sample changer -XSAMPLE630

  • Product

    Compatible with various sizes of syringes with one unit Sample changer Xsample 340




*Please note that we may not be able to accommodate sample requests.

1 Models of Compatible with various sizes of syringes with one unit Sample changer Xsample 340

Product Image Part Number Price (excluding tax) Available syringes Compressed air supply or nitrogen gas Consumption of cleaning solution Dimensions (excluding master devices) (length x width x height) Environmental conditions (en 61,010) Filling mode Humidity Operating temperature Power supply part Requirements of compressed air Sample amount per measurement Viscosity range Weight (excluding master devices)
Compatible with various sizes of syringes with one unit Sample changer Xsample 340-Part Number-164759

164759

Available upon quote 2 ml lure plastic corresponding to a sample viscosity of up to 36,000 mpa.s, 5 ml lure plastic corresponding to sample viscosity of up to 10,000 mpa.s. Relative pressure 0.3 BAR (air supply of master device), maximum relative pressure 1.5 BAR (air supply of XSAMPLE 340), Options: Relative pressure 2.0 BAR (external compressed air) Approximately 7 ml (for cleaning time 10 seconds), about 11 ml (cleaning time 15 seconds) 480 mm x 230 mm x 420 mm Limited use of indoor use Pressure from the syringe Relative humidity 10-90 %, no condensation +15 ~+35 ℃ Supplies from the master device, the main power supply voltage, see the nameplate on the back of the master device (protection earth required) ISO 8,573-1 Class 3 Compatible: Maximum particle size: 5 μm, dew point with maximum pressure: --20 ° C-, maximum oil content: 1 mg/m3 Approximately 3 ml (depending on the system configuration) Up to 36,000 mpa.s.s in peripheral temperature and measurement temperature Approximately 9.4 kg

Customers who viewed this product also viewed

Other products of Anton Paar GmbH


View more products of Anton Paar GmbH

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree