Easy -to -operate single sample changer XSAMPLE 320
Anton Paar GmbH
About This Product
■ Easy -to -operate single sample changer
・ Equipped with a peristaric pump of industrial grade, it can be measured with a single button.
・ If you use it, you will be able to fill in the user only by setting the parameter in advance, and as a result, the number of mistakes will be reduced.
・ Because filling and measurements are performed automatically, operators can concentrate on more important work. The pump filling speed can be adjusted flexibly, so you can optimize the sample processing and obtain a perfect measurement result.
■ Because it is easy to operate, the number of mistakes is reduced
・ Filling parameters can be easily entered using touch screen, mouse, and keyboard.
・ Quickly assign a measurement method with a setting suitable for the characteristics of the sample.
・ By adjusting the pump speed, the filling operation is optimized and handling mistakes are reduced.
・ Filling work on the master device does not depend on the user and guarantees the reproducibility of the measurement results
■ Improve work efficiency by high sample loopput
・ Shortening of filling time -Industrial grade perstallic pump, mechanism to replace samples without intermediate cleaning
・ Achieving the maximum level of accuracy by filling multiple times from one vial: Verification by calculating the difference in density for two consecutive measurements.
・ You can concentrate on more important tasks because you do not need to operate all steps of the measurement by hand.
■ Robust design and easy installation
・ All of the envelopes are durable so that corrosive samples can be handled.
-Peristaric pumps are robust and guaranteed for long -term trouble.
・ Automatic recognition function: If you start the master device, the XSAMPLE 320 will be launched in conjunction.
・ Integrated software screen in the master device -Easy operation and can be mastered in a short period of time
■ Compatible device
・ DMA
・ DSA5000
・ Soft Drink Analyzer M
・ Lovis2000 m/me
■ Related products
・ XSAMPLE520
・ Heat sample changer -XSAMPLE630
・ XSAMPLE330
・ Xsample340
・ Xsample530
-
Product
Easy -to -operate single sample changer XSAMPLE 320
-
Handling Company
Anton Paar GmbH
2 Models of Easy -to -operate single sample changer XSAMPLE 320
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Altitude | Dimensions (excluding master devices) (length x width x height) | Environmental conditions (en 61,010) | Filling mode | Minimum sample amount | Operating temperature | Overvoltage category | Pollution | Power supply part | Product No | Standard time required for filling/measuring cycles | Viscosity range | Weight (excluding master devices) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
XSAMPLE 320 |
Available upon quote | Up to 3,000 m | 205 mm x 148 mm x 185 mm | Limited use of indoor use | One -way suction mode, one -way suction and reverse suction | Approximately 10 ~ 20 ml | 15 ~+35 ℃ | II | 2 | Supplies from the master device, the AC power supply voltage is the technical specification nameplate on the back of the master device (protection earth required) | 184368 | 2-5 minutes | Up to 3,000 mpa • S in the peripheral temperature and measurement temperature (if the viscosity of the sample exceeds 500 mpa • s at the peripheral temperature and measurement temperature, bubbles may occur at the time of filling.) | Approximately 3.4 kg |
|
|
Xsample 320 (High-Resistance) |
Available upon quote | Up to 3,000 m | 205 mm x 148 mm x 205 mm | Limited use of indoor use | One -way suction mode, one -way suction and reverse suction | Approximately 10 ~ 20 ml | 15 ~+35 ℃ | II | 2 | Supplies from the master device, the AC power supply voltage is the technical specification nameplate on the back of the master device (protection earth required) | 184368 | 2-5 minutes | Up to 3,000 mpa • S in the peripheral temperature and measurement temperature (if the viscosity of the sample exceeds 500 mpa • s at the peripheral temperature and measurement temperature, bubbles may occur at the time of filling.) | Approximately 3.5 kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Anton Paar GmbH
View more products of Anton Paar GmbH
About Company Handling This Product
- Austria