Pressure dew point converter Testo 6742
Testo SE & Co. KGaA
About This Product
Testo 6742 is a converter that measures pressure dew points and remaining humidity within the range of -45 to+30 ° C TD. In addition to two -wire 4-20mA analog output, it supports switch output by optional contact plug (alarm plug). You can record the remaining humidity in the thin film drying and adsorbed drying system.
Air, compressed air, and gas are used in all areas of industry. In general, it is not good to have moisture and moisture because there is a risk of damaging the quality of the final product. Use of measurement and control technology is recommended to monitor the humidity of the entire system and prevent damage.
-45 ° CTD ~+30 ° CTD measured range and compatible with NPT½ Inch screws
･ Equipped with high accuracy and stably functioning for a long period of time.
･ Analom plug with a built -in analog output (4-20 ma) that can be freely scaled (4-20 ma) and two switch output
It is designed to measure the trace amount of humidity contained in the compressed air or dried air. Equipped with a high -precision and stable function for a long period of time.
Testo 6742 The pressure under pressure can be measured with a maximum ± 1 k accuracy during 0 ° CTD using a polymer humidity sensor with excellent accuracy.
Scaling -friendly analog output
･ Testo 6742 converts the measured values to standardized electrical signals. Therefore, the analog output (4-20 ma) can be scaled as needed.
Alarm plug (optional) with two switch output
･ Use the switch contact plug to achieve the maximum monitoring.
･ Testo 6742 The pressure dew point converter is a compact and easy -to -use design. In one example, the housing can rotate 350 °.
It can prevent deterioration of quality inside, such as a cooling dryer or a thin film dryer. If the quality of the final product is impaired in some way, it can cost a lot, so you can save a lot of money by using Testo 6742. In addition, the operation cost of the adsorpted dryer can be reduced.
If you consume a playback air based on the time interval set in advance, it will often be consumed more than necessary. By using accurate humidity -controlled chamber, you can accurately adjust the use of playback air to meet the requirements.
-
Product
Pressure dew point converter Testo 6742
-
Handling Company
Testo SE & Co. KGaA
1 Models of Pressure dew point converter Testo 6742
| Product Image | Part Number | Price (excluding tax) | Analog output | Analog output accuracy | Analog output resolution ability | Converter body external dimension | Converter body housing | Converter body mass | EMC standard | Incure of temperature measurement | Model number | Operating temperature | Power consumption (no alarm plug) | Power consumption (with alarm plug) | Protection grade | Storage temperature | Temperature measurement range | Temperature sensor | display |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
testo 6742 |
$ 1,689.60〜 | 4-20mA (2 -wire type) | ± 40 μA | 12bit | 199.5 × 37 × 37mm (including standard plug) | Plastic, polyacryluamide | Approximately 300g | 89/336/EEC | ± 0.5k (0 to+50 ℃) | 0555 6742 | -20 ~+70 ℃ | 21ma | 65MA | IP65 (plug, when using wires) | -40 ~+80 ° C | 0 to+50 ℃ | NTC Thermista | 1 line LCD |
Customers who viewed this product also viewed
Other products of Testo SE & Co. KGaA
View more products of Testo SE & Co. KGaA
About Company Handling This Product
- Germany
- Since 1957