Shaft type compressed air flow meter DN40-250 testo 6448
Testo SE & Co. KGaA
About This Product
Measure the consumption of compressed air more accurately: Testo 6448 Compressed air flow gauge not only can accurately measure the compressed air, but also easily remove the barprove. Testo 6448 helps to detect leaks, manage the usage by integrated flow rate, and reduce energy -saving costs through it.
In industrial companies, compressed air is used as an important energy source, but at the same time it is a major cost source. Accurate measurement and control technology can reveal the consumption of compressed air. Accurate measurements of compressed air can help saving energy and cost and realizing control of the controlled environment (such as compliance for ISO50001 and ISO14001).
It can be used to measure the consumption of compressed air, monitor consumption and leaks, and measure the flow rate. You can also perform peak load analysis to determine whether or not a sufficient amount of compressed air can be generated. These measurements can distribute peak loads to reduce power rates and reduce energy.
Testo 6448 Compressed air flow gauge is also a converter and converts the measured parameters into analog signals. This allows Testo 6448 to connect the system (such as compressed air system). Testo 6448 Compression Air Fluid Meter also has the following advantages.
･ Excellent flexibility that can use various signal output
You can use analog output, pulse output, and switch output. Therefore, it can be used for all purposes, such as measurement of consumption, consumption or leakage, and flow measurement.
･ Reflux prevention mechanism and ball valve can quickly and safely assemble and decompose probes.
There is no risk of injury due to reflux or outflow of compressed air. Probes can be used flexibly with multiple measurement points.
･ The entire converter can be assembled with the pressure applied
It is attached while operating using a tapping clamp (option).
･ Built -in integration function
The total consumption can be grasped without additional analysis units with the Totorizer function.
･ Easy operation and high flexibility
It is possible to set the parameter of the signal output and switch the physical unit. It also supports signal delays and attenuation.
･ Measurement based on the principle of heat measurement: There is no pressure drop during measurement.
It does not require temperature compensation and achieves a fast response speed. It has a sturdy sensor and supports various pipe diameter (DN40-250).
-
Product
Shaft type compressed air flow meter DN40-250 testo 6448
-
Handling Company
Testo SE & Co. KGaA
1 Models of Shaft type compressed air flow meter DN40-250 testo 6448
| Product Image | Part Number | Price (excluding tax) | Analog output | Analog output load | EMC standard | External dimensions | Flow rate measuring body | Flow speed measurement range | Flow velocity sensor | Flow velocity unit | Gas contact portion | Humidity environment | Model number | Operation condition medium | Protection grade | Standard flow rate unit | Storage temperature | Temperature environment | Temperature measurement range | Temperature unit | connection | display | mass | parameter settings | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
testo 6448 |
Available upon quote | Can be selected between 4 -wire 4 to 20mA 0 from maximum measurement value | Up to 500Ω | 89/336/EEC | 45 x 110 x 393mm (standard) | PBT (glass fiber: 20 %), PC (apec), makrolon / stainless steel (1.4301), button | 0-160m/s | Glass coating ceramic thermal heat sensor | m/s | Pipe material, PEEK, polyester, button, aluminum oxide | 90%or less | 0555 6448 | Air nitrogen, carbon dioxide (nitrogen, carbon dioxide can be measured after adjusting) | IP65 | M3/H, M3/min, M3 | -25?+85 ℃ | 0 to+60 ℃ | 0 to+60 ℃ | ℃ | M12 plug x 1, 4 -pin, up to 250mA | 4 digit alphanumeric display | 850g | Operation button x 2 | 19-30V DC 100ma or less |
Customers who viewed this product also viewed
Other products of Testo SE & Co. KGaA
View more products of Testo SE & Co. KGaA
About Company Handling This Product
- Germany
- Since 1957