TESTO 6744 with a pressure -dewed point converter NPT1/2 display
Testo SE & Co. KGaA
About This Product
Testo 6744 is a converter that measures pressure dew points and remaining humidity within the range of -45 to+30 ° C TD. In addition to two -wire 4-20mA analog output, it supports switch output by optional contact plug (alarm plug). You can record the remaining humidity in the thin film drying and adsorbed drying system. Since the display rotates 360 °, the measured value can be confirmed from any angle.
Air, compressed air, and gas are used in all areas of industry. In general, it is not good to have moisture and moisture because there is a risk of damaging the quality of the final product. Use of measurement and control technology is recommended to monitor the humidity of the entire system and prevent damage.
It is designed to measure the trace amount of humidity contained in the compressed air or dried air. Equipped with a high -precision and stable function for a long period of time.
Testo 6744 Pressure dew converter can be measured with a maximum ± 1 k accuracy at 0 ° CTD using a polymer humidity sensor with excellent accuracy.
Scaling -friendly analog output
・ Testo 6744 converts the measured value to standardized electrical signals. Therefore, the analog output (4-20 ma) can be scaled as needed.
Alarm plug (optional) with two switch output
・ Use the switch contact plug to achieve the maximum monitoring.
・ Testo 6744 The pressure dew point converter is a compact and easy -to -use design. In one example, the housing can rotate 350 °.
・ Display with operation menu
The operation is convenient and you can read the measured values on site.
It can prevent deterioration of quality inside, such as a cooling dryer or a thin film dryer. If the quality of the final product is impaired in some way, it can cost a lot, so you can save a lot of money by using Testo 6744. In addition, the operation cost of the adsorpted dryer can be reduced.
If you consume a playback air based on the time interval set in advance, it will often be consumed more than necessary. By using accurate humidity -controlled chamber, you can accurately adjust the use of playback air to meet the requirements.
-
-
Product
TESTO 6744 with a pressure -dewed point converter NPT1/2 display