Gear pump unit GPU-15 series for those who want fine-tuned operations
ANEST IWATA Corporation
About This Product
■ Features
・ Recommended discharge: 10-100L/min
・ Unit of gear pump and motor
・ Portable: 60 x 30 cm compact size and easy to carry
・ Low discharge / stable supply: stable supply is possible without pulsation even with low discharge under 50 ml or less
・ Reduce cleaning time: Prepare a type with a shorter mechanism that applies if you want to shorten the cleaning time by changing color.
・ Reduction of cleaning thinner: Cleaning is possible in about 1/6 to 1/8 compared to conventional paint pumps
・ High reproducibility: Repeated discharge accuracy can be retained within ± 2 %. In addition, fine -tuning operation is easy
■ Notes on paint used
* If you use a paint with a wearing pigment, the life may be extremely short.
* 2 The gear pump on the curing agent side used in the liquid system must overhaul regularly every 1-2 months because the curing agent coags the bearing portion.
* When Sen Introduction is added, it cannot be used for deterioration and hardening paint (emulsion paint, dispersion paint, UV paint).
-
Product
Gear pump unit GPU-15 series for those who want fine-tuned operations
-
Handling Company
ANEST IWATA Corporation
2 Models of Gear pump unit GPU-15 series for those who want fine-tuned operations
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Available viscosity | Corresponding paint | Discharge | Discharge accuracy | Flashable operation pressure | Flow rate adjustment range | Fluid temperature | Gear pump specification | Liquid part material | Maximum allowable rotation speed | Maximum use pressure | Motor specification allowed rotation speed | Motor specification deceleration ratio | Motor specification power capacity | Motor specs explosion -proof | Paints/Supreme Joint Entrance Size | Paints/Supreme Joint Exit Size | Recommended discharge range | Total length x full width x full height | Used peripheral temperature | cable length | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
GPU-F15-20 |
Available upon quote | 30 seconds/NK-2 or less | Solid metallic paint | 1.5ml/rotation | ± 2 % | 0.3 ~ 0.5MPa | In G1/4b out G1/4b ML/Min | 5 ~ 43 ℃ | GPA-N15 | SUS | 250rpm/min | 2.0MPa | 10 ~ 75rpm | 20: 1 | 3 phase 200V 0.1kw | Simple air purge | G1/4B male | G1/4B male | 10 ~ 100ml/min | 300 x 450 x 660mm | 5 to 40 ° C | 3m | 31kg |
|
|
GPU-N15-20 |
Available upon quote | 30 seconds/NK-2 or less | Solid metallic paint | 1.5ml/rotation | ± 2 % | - | In G1/4b out G1/4b ML/Min | 5 ~ 43 ℃ | GPA-F15 | SUS | 250rpm/min | 2.0MPa | 10 ~ 75rpm | 20: 1 | 3 phase 200V 0.1kw | Simple air purge | G1/4B male | G1/4B male | 10 ~ 100ml/min | 300 x 450 x 660mm | 5 to 40 ° C | 3m | 31kg |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of ANEST IWATA Corporation
View more products of ANEST IWATA Corporation
About Company Handling This Product
- Japan
- 1,799 employees