Intelligent controller E-SC12B series that fully demonstrates the performance of electrostatic guns
ANEST IWATA Corporation
About This Product
Feature
■ Earth abnormality detection
This function is detected when the ground connection of the electrostatic controller is poor.
■ Overladium abnormality detection
It is a function to detect when a painted current of 80 μA or more (initial value) occurs.
■ Shield disconnection detection
It is a function to detect when the shield wire of the low voltage cable is disconnected.
■ Timeover detection
This is a function that detects when a continuous charge signal is recognized for 2 minutes or more.
■ Metal bridge abnormally avoidance function
It is a function to avoid the aluminum flakes distributed in the metallic paint, connecting each other in a chain with an electrostatic action, and avoiding abnormal power.
■ Remarks
Painting hoses and air hoses are sold separately.
-
Product
Intelligent controller E-SC12B series that fully demonstrates the performance of electrostatic guns
-
Handling Company
ANEST IWATA Corporation
2 Models of Intelligent controller E-SC12B series that fully demonstrates the performance of electrostatic guns
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accessories Low Voltage Cable (M) | Charge ON/OFF mechanism | Input voltage (v) | Mass (g) | Maximum use pressure (MPA) | Output current (A) | Output voltage (KV) | Power consumption (W) | Surround humidity (%RH) | Total length x full width x total height (mm) | Used peripheral temperature (℃) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
E-SC12B |
Available upon quote | Ten | Air Flo Switch type (air joint in/out size: G1/4b male) | AC100 ~ 120 50/60Hz single phase (setting to 200 to 240V single phase can be changed) | Approximately 3,100 | Air: 0.68 paint: 0.35 | MAX 80μ (electrostatic gun discharge current) | MAX AC12 (electrostatic controller alone) | About 35 | 90 | 357 x 125 x 150 | 5 ~ 40 |
|
|
E-SC12BH |
Available upon quote | Ten | Air Flo Switch type (air joint in/out size: G1/4b male) | AC100 ~ 120 50/60Hz single phase (setting to 200 to 240V single phase can be changed) | Approximately 3,100 | Air: 0.68 paint: 0.35 | MAX 80μ (electrostatic gun discharge current) | MAX AC12 (electrostatic controller alone) | About 35 | 90 | 357 x 125 x 150 | 5 ~ 40 |
Click on the part number for more information about each product
Other products of ANEST IWATA Corporation
View more products of ANEST IWATA Corporation
About Company Handling This Product
- Japan
- 1,799 employees