Load measurement / control type servo press controller PFAE-Pfae

Load measurement / control type servo press controller PFAE
Unipulus

About This Product

PFAE is an embedded type that can now put PFA in the control panel. Like PFA, a versatile controller that can control the motor and judge the work at the same time. The commonly used sequence is prepared in the template, so you can easily create a sequence.

Equipped with a wide variety of judgment functions, such as "load-displacement" or "torque-angle" two-dimensional waveform judgment, and manages the whole test. You can draw two types of waveforms, set the judgment while looking at the waveform, and save the waveform data on the SD card.

Collaboration with external devices and continuous tests can be performed alone, and PLC -less test machines, press machines, screw tightens, etc. can be constructed. Combined with the load sensor, precise pressing control by high -speed feedback control of 5,000 times per second, high -speed press without overshooting is possible.

* 1 Please contact us as the comparison mode can be expanded to 256 varieties.
* 2 Please contact us as the control recipe can be expanded to up to 256.

Model
There are 1 models for this product.

Product
Load measurement / control type servo press controller PFAE

Handling Company
Unipulus

*Please note that we may not be able to accommodate sample requests.

1 Models of Load measurement / control type servo press controller PFAE

Product Image	Part Number	Price (excluding tax)	CCL	Comparative judgment function waveform comparison mode 16 varieties registration possible	Comparison judgment function Multi -point comparison mode 16 varieties registration possible	EIP	Motor I / O input	Motor I / O output	Motor interface	SD card	Sensor input part streagage input (6 -wire type) Applied voltage	Sensor input part streagage input (6 -wire type) Low -pass filter	Sensor input part streangage input (6 -wire type) A / D converter	Sensor input unit Strungage input (6 -wire type) Signal input range	Sensor input unit Strungage input (6 -wire type) accuracy	Sensor input unit analog monitor output level level	Sensor input unit analog monitor output load resistance	Sensor input unit displacement sensor input (pulse input: line driver) Compatible sensor	Sensor input unit displacement sensor input (pulse input: line driver) Maximum input frequency	Sensor input unit displacement sensor input (pulse input: line driver) internal count range	Sensor input unit external signal input signal 16 points	Sensor input unit external signal output signal 16 points	Sensor input unit voltage input A / D converter	Sensor input unit voltage input Low pass filter	Sensor input unit voltage input accuracy	Sensor input unit voltage input resistance	Sensor input unit voltage input signal input range	Sequence function	Supported servo amplifier	USB
	Pfae	Available upon quote	CC-Link interface (optional)	Compare the upper and lower limit setting waveforms and the actual measurement waveform. The overall measurement waveform is subject to the upper and lower limit, and it becomes NG if one place exceeds the setting waveform.	Up to 5 points of any hold up to 5 points at the same time, comparison judgment sample, peak, bottom, P-P, maximum value, minor value, metal point, average value, terminal displacement	Ethernet / IP interface (optional)	Servandy / motor alarm / imposition / brake off / torque limit / zero speed	Pulse input prohibition / pulse clear / Servon / gain switch / alarm clear / pot / not	Parking pulse column (A / B phase) line driver (RS-422A compliant) Up to 500 k pulse / sec	Setting data / waveform storage (CSV)	DC 2.5, 5, 10 V ± 10% (switching by setting) Output current: 30 mA or less	Select from 2 Hz to 2 kHz (-6 db / Oct.)	Speed: 5,000 times / second resolution: 24 Bit (binary)	-2.0 ~ +2.0 MV / V	Non -linear: 0.02% FS ± 1 DIGIT or less (at 2.0 MV / V) Zero drift: 0.2 μV / ° C RTI Typ.	Road cell input 1 MV / V about 2 V	2 kΩ or higher	Output: Inclumental method 2 Phase output (A, B signal output) Output circuit specification: line driver (RS-422A compliant)	1 MHz	30 bit	Bulk Digital Zero / Displacement Initial Position / Measurement Start / Measurement End / Hold1-5 / 5 / Reset / Work Switch / Shake Start / Square Start / Pulsequence Suspension / Pulse Clear / Alarm Reset / Return Prohibition / Return Prohibition / Original Picture Detection / Home Detection / JOG+ / JOG- / Jog- / Step + / Step- / none * Selected input format from the above: As a Cyclic communication bit of PLC	Point judgment (load, displacement) / load overload / measurement / waveform comparison judgment / load / displacement normal / CPU normal operation / CPU normal operation / SD memory card normal / timing output 1, 2 / Surbo lady / motor alarm / instrument / torque limit / zero specification / sequence operation / pot / no T / Return of Toint Completion / None * Selected output format from the above: PLC as a cyclic communication bit	Speed: 5,000 times / second resolution: 24 Bit (binary)	Select from 2 Hz to 2 kHz (-6 db / Oct.)	Non -linear: 0.02% FS ± 1 DIGIT (10 v) Zero drift: 0.2 MV / ℃ RTI gel lift: 0.01% / ℃	Approximately 1 mΩ or higher	-10 ~ +10 v	・ Up to 16 control recipes can be registered according to the variety ・ 1 Operation of up to 100 steps can be registered in the control recipe ・ Full -close loop force control and position control are possible.	Pulse column input servo amplifier	USB device interface