Energy-saving power-oriented power latterer/controller VCⅡ-R/S type
CKD Nisshin Electrical Corporation Co., Ltd.
About This Product
■ Characteristics
・ Servo driver during driving, energy -saving -oriented servo driver that functions as a power regenerative device when regeneration
・ Realizes cost reduction, space -saving, ministry wiring, and powerful reduction in power supply.
・ Because it is a servo driver, stable operation
・ Stopping and frequent brakes can be operated efficiently
・ Converter, inverter integrated type, spacing and cost performance.
■ Examples of use
・ Continuous regeneration operation: Each load test machine, winding device, tension roll, etc.
・ Repeated regenerative energy operation: Up and lower axis transport device, vibration control device, servo press, etc.
Advantages of power regeneration
■ Cost reduction
・ Demonstrates significant power saving effects to return the power at the time of regenerative operation to the supply power supply (100%in the case of regeneration)
-The power input rate ≒ 1 is controlled to achieve about 2/3 of the power supply capacity of the device for a normal servo driver.
■ Space -saving, ministry wiring
Regular resistors are not required to return regenerative energy to power as electricity
■ Significantly reduces power supply harmonics
Realizes converted coefficient K5 = 0 of "Guidelines for hyperactive suppression of high -tract suppression of high -voltage or special high voltage"
■ Compatible network
・ SSCNETⅢ (/h)
・ MECHATROLINK-II
・ CC-Link
Line up
■ Direct drive, synchronous AC servo motor compatible
AC200V: 11kW/15kW/20kW/30kW/37kW
■ Induced AC servo motor compatible * Inside model number ()
・ AC200V: 7.5kW/11kw/15kW/20kW/30kW/37kW
・ AC400V: 22kW/30kW/75kW
■ Common specifications
Installation location: Do not install in harmful atmosphere such as corrosion gas, grinding oil, metal powder, oil, etc.
-
Product
Energy-saving power-oriented power latterer/controller VCⅡ-R/S type
-
Handling Company
CKD Nisshin Electrical Corporation Co., Ltd.
9 Models of Energy-saving power-oriented power latterer/controller VCⅡ-R/S type
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Approximately used humidity | Braking method | Carrier frequency | Carrier frequency Hz converter | Carrier frequency Hz inverter | Continuous output current ARMS | Control power supply capacity | DC24V control power supply voltage specification | Drive system | Impact resistance | Input power supply allowed voltage fluctuation | Input power supply voltage specification | Instant output current ARMS | Maximum speed frequency MPPS | Mounting direction | Noise | Output capacity w | Power capacity (when rated output) | Power part input power supply permit voltage fluctuation | Power part input power supply voltage specification | Power part power supply capacity (when rated output) KVA | Speed control range | Used peripheral temperature operating temperature | Used peripheral temperature temperature when saving | Vibration resistance | control method | cooling method | elevation | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
NCR-A2A-113D (-752) |
Available upon quote | 85%or less without condensation | Power resourment braking | 10K | - | - | 46.6 | - | - | 3 Sono Masamasa PWM | Five | AC170 ~ 242V, 50/60Hz 3 phase | AC200 ~ 230V, 50/60Hz 3 phase | 93.2 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 11.0k (7.5k) | 12 | - | - | - | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | Ten |
|
|
NCR-A2A-153D (-113) |
Available upon quote | 85%or less without condensation | Power resourment braking | 10K | - | - | 62.6 | - | - | 3 Sono Masamasa PWM | Five | AC170 ~ 242V, 50/60Hz 3 phase | AC200 ~ 230V, 50/60Hz 3 phase | 125.2 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 15.0k (11.0k) | 18 | - | - | - | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 18 |
|
|
NCR-A2A-203D (-153) |
Available upon quote | 85%or less without condensation | Power resourment braking | 10K | - | - | 89 | - | - | 3 Sono Masamasa PWM | Five | AC170 ~ 242V, 50/60Hz 3 phase | AC200 ~ 230V, 50/60Hz 3 phase | 178 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 20.0 (15.0K) | 23.5 | - | - | - | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 31 |
|
|
NCR-A2A-223D (-203) |
Available upon quote | 85%or less without condensation | Power resourment braking | - | 12K | 10K | 120 | - | DC24V | 3 Sono Masamasa PWM | Five | AC170 ~ 240V, 50/60Hz 3 phase | AC180 ~ 230V, 50/60Hz 3 phase | 240 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 30.0k (22.0k) | 39 (27) | - | - | - | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 45.2 |
|
|
NCR-A2A-373D (-373) |
Available upon quote | 85%or less without condensation | Power resourment braking | - | 12K | 10K | 180 | - | DC24V | 3 Sono Masamasa PWM | Five | AC170 ~ 240V, 50/60Hz 3 phase | AC180 ~ 230V, 50/60Hz 3 phase | 360 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 37.0K | 48 | - | - | - | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 50 |
|
|
NCR-A3A-303D (-223) |
Available upon quote | 85%or less without condensation | Power resourment braking | - | 12K | 10K | 60 | 80 | - | 3 Sono Masamasa PWM | Five | AC340 ~ 520V, 50/60Hz 3 phase | AC360 ~ 500V, 50/60Hz 3 phase | 120 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 30.0k (20.0k) | - | - | - | 39 (27) | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 44 |
|
|
NCR-A3A-373D (-373) |
Available upon quote | 85%or less without condensation | Power resourment braking | - | 12K | 10K | 90 | 130 | - | 3 Sono Masamasa PWM | Five | AC340 ~ 520V, 50/60Hz 3 phase | AC360 ~ 500V, 50/60Hz 3 phase | 180 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 37.0 (30.0) | - | - | - | 48 (39) | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 49.5 |
|
|
NCR-D9A-114D (-753) |
Available upon quote | 85%or less without condensation | Regular braking (absorption, regeneration on the converter side) | 10k/7.5k (parameter selection) | - | - | 200.0 (250.0) | 80 | DC24V | 3 Sono Masamasa PWM | Five | - | - | 500 | 25 However, the frequency of an encodapulus 4 multiplication | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 110.0k (75.0K) | - | DC480 ~ 840V | DC660 ~ 760V | 128 (87) | 1: 5,000 | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 117 |
|
|
NCR-QXA0A3A-114 |
Available upon quote | 85%or less without condensation | Power resourment braking | 11k | - | - | 195 ~ 169 | 70 | DC24V | 3 Sono Masamasa PWM | Five | - | - | 390 ~ 338 | - | Panel mounting type | FT/B ± 2,000V (frequency 5/100kHz, cycle 300ms), 1 minute radiation noise ± 1,000V (50 ns, 10cm), 1 minute static noise ± 10kVA (between earth houses) | 110.0K | - | AC340 ~ 520V, 50/60Hz 3 phase | AC360 ~ 500V, 50/60Hz 3 phase | 136 | - | 0 to 55 ℃ | -20 ~ 60 ° C | 0.5g (10 ~ 50Hz) | Semi -close dwarf by encoder (linear sensor) feedback | Forced air cooling | 1,000m or less | 112 |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of CKD Nisshin Electrical Corporation Co., Ltd.
View more products of CKD Nisshin Electrical Corporation Co., Ltd.
About Company Handling This Product
CKD Nisshin Electrical Corporation Co., Ltd.
- Japan
- Since 1967
- 230 employees