Electrostatic capacity system Non-contact variable 2 channel portable motion Analyzer UMA-500
Unipulus
About This Product
High -precision measurement of microscopic displacement and vibration by non -contact. Visualization of difficult small displacement and vibration measurements that were difficult.
By detecting and managing the distortion of machine tools, positioning, the axis swinging, and vibration, it can help maintain and improve quality, and to prevent the equipment problems at the manufacturing site. It is an all -in -one -type portable motion analyzer that performs measurement, display, analysis, and record with this one unit.
■ Accurate gap measurement can be easily measured. UMA-500-GAP: Gakuma measurement specifications
UMA-500-GAP is a portable motion analyzer dedicated to sashimi measurement. Comes with a sukima probe (cable length 2 m) (standard probe is not included) You can accurately measure the gaps that have been measured using different thickness gauges in μm units. Even if the opening is narrow, there is no problem if the probe can be inserted.
■ 2ch measurement / display / analysis / record is possible with one unit
･ Measurement: High-resolution and high-speed response, measurement range: 0 to 500 μm, displacement decomposition ability: 10 nm (RMS), response speed: 1 kHz (-3 db)
･ Display: (5.7 inch TFT liquid crystal display) Various display modes can be selected such as waveform drawing of each channel, calculation result, and lasage curve drawing.
･ Record: The latest 100 waveforms are automatically saved on the internal memory and can be checked immediately on the history screen. The measurement data is recorded in CSV format in SD card.
･ Analysis: Equipped with a signal processing function such as FFT analysis, addition, subtraction, maximum, lower limit, filter, etc. between various channels.
･ Operation: Addition, subtraction, thickness measurement, gap measurement, researcher measurement
･ Judgment: Pass / fail judgment for each channel and calculation value
･ Filter: Low -pass filter and band eliminated filter can remove unnecessary signal components
･ Time axial waveform: Converts the signal from the probe and can be confirmed by the waveform of the time axis change.
･ FFT analysis: You can check how strong each frequency component is included in the time axis waveform.
-
Product
Electrostatic capacity system Non-contact variable 2 channel portable motion Analyzer UMA-500
-
Handling Company
Unipulus
1 Models of Electrostatic capacity system Non-contact variable 2 channel portable motion Analyzer UMA-500
| Product Image | Part Number | Price (excluding tax) | Analog (common to CH-A / CH-B) A / D converter | Analog (common to CH-A / CH-B) Displacement measurement range | Analog (common to CH-A / CH-B) Displosion | Analog (common to CH-A / CH-B) attached probe | Analog (common to CH-A / CH-B) filter | Analog (common to CH-A / CH-B) frequency characteristics | Analog (common to CH-A / CH-B) noise | Analog (common to CH-A / CH-B) straightness | Analog section (common to CH-A / CH-B) Displacement off order | Analog section (common to CH-A / CH-B) Zero adjustment | Analysis department analysis data | Analysis department analysis method | Analysis department window format | Analysis unit analysis frequency range | Analysis unit display unit | Average analysis unit | Display display | Display of display portion judgment | Display portion small number | Display status display | Display unit | Display waveform display | Displayed part update time | Displayed portion display value | Division operation mode | Operating department | Record record data | Recording department recording function | Recording department recording method | Recording unit recording medium |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
UMA-500 |
Available upon quote | Conversion method: ⊿σ type speed: 5,000 / second, 500 / second, 50 / second / second selection | 0 to 500 μm | 10 NM RMS | UMA-500: Dedicated electrostatic capacitance non-contact probe (6φ straight type) 2 UMA-500-GAP: dedicated Sukima Prove | By digital operation, a low pass / band eliminated filter can be set to any frequency | DC ~ 1 KHz | 0.002% FS (RMS) or less | ± 0.01% or less (correction by approximation type) | 50 μm | By digital calculation | Displacement and calculation data number: 256 (1x) / 512 (2 times) / 1024 (4 times) / 2048 (8 times) | FFT spectral analysis | Rectangula / Hunning / Flat Top | DC -1.25 kHz * However, high -pass filter processing for DC component cancellation is performed. (FC = 1 Hz -3 DB) | DB (Displays DB value from spectral standard displacement) | Up to 16 times moving average (calculated for each frequency) | 5.7 inch TFT Color LCD (320x240 DOT) | Up and lower limit comparison (buzzer sound notification function and display color notification function available) | 0, 0.0, 0.00, 0.000, 0.0000 (fixed or automatic can be selected) | ・ Status: Near / Far / Hold / Save / OK / NG ・ Hold: Sample / Peak / Valley / Peak to Peak | MM, μm, NM selectable | Input A / B on the graph screen of each graph wave shape, draw a graph wave shaping of the calculation value, and draw a scarage curve | 0.1 to 2.0 seconds possible | Displacement value: -999,999-999,999, calculation: -999 ,999-999,999 | ・ Addition D = A + B + C, subtraction D = a - b - C, lingage measurement D = a + j b * C is an arithmetic subsidy setting value (can be set with double polarity). A and b are possible to reverse the number, sukima D = a + b + C * C is set to probe thickness | Touch panel and key sheets (CH, ZERO, SAVE, START / STOP) | Measurement data (date and time, each CH displacement value, calculation value, calculation mode, calculation aid value, judgment result), graph data, analysis data | ・ Internal memory: Automatic record (100 graph waveforms / Lasage and FFT analysis results for 30 times) ・ SD card: Select and record manual mode or automatic mode | ・ Measurement data: CSV format / graph waveform data: CSV format or BMP format can be selected * Lasage curved graph only for BMP -FFT spectrum data: CSV format or BMP format can be selected. | Internal memory and SD card 1 GBYTE |
Customers who viewed this product also viewed
Other products of Unipulus
![Road cell [For load measurement] Ultra -thin compressed load cell UST-Unipulus](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30004442023062169.png)
![Road cell [For load measurement] Ultra -small tensile / compressed load cell USM-Unipulus](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30004442023062170.png)
![Road cell [For load measurement] Small compressed load cell UNCSR-Unipulus](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30004442023062174.png)
View more products of Unipulus
About Company Handling This Product
- Japan
- Since 1970