Load measurement/control SD card compatible graphic display/touch panel type digital indicator F381A

1 Models of Load measurement/control SD card compatible graphic display/touch panel type digital indicator F381A

Product Image	Part Number	Price (excluding tax)	Discounted sensor input actual load comparative range	Discounted sensor input equivalent input input range	Discounted sensor input zero adjustment range	Displacement sensor input A / D converter	Displacement sensor input accuracy	Displacement sensor input analog filter	Displacement sensor input conformity sensor	Displacement sensor input equivalent input input positive error	Displacement sensor input internal count range	Displacement sensor input resistance	Displacement sensor input signal input	Display display	External signal input signal 16 points	External signal output signal 16 points	Indicated portion indicated value	Load -used sensor input (steengage input fixing) analog monitor output	Load -used sensor input (streagage input fix) A / D converter	Load -used sensor input (streagage input fixing) Insurable voltage	Load -used sensor input (streagage input fixing) signal input range	Maximum input frequency for displacement sensor input	Measurement function multi -hold mode 16 ch (setting saved)	Measurement function waveform comparison mode 16 ch (setting saved)	Number of display portions displayed	Purchase sensor input (streagage input fixing) analog filter	Purtive load sensor input (streagage input fixing) accuracy	[232] RS-232C communication interface	[CCL] CC-Link interface (optional)	[ETN] Ethernet interface (optional)	[ODN] DeviceNet interface (optional)
	F381A	Available upon quote	-5 V ~ +5 V Zero Approximately -0.01 V ~ +0.01 V cannot	-5 v ~ -1 v +1 v ~ +5 v	-5 V to +5 V Automatic adjustment method with digital operations	Speed: 4,000 times / second resolution ability: 24 Bit (binary) Effective resolution ability: about 1/30,000 for 5 V	Non -linear: 0.02% FS ± 1 DIGIT (at 5 V) Zero Dorift: 50 μV / ℃ RTI Gind lift: 0.02% / ℃	Select Low Pass Filter (-6 DB / Oct.) 10, 30, 100, 300 Hz	Output: Inclumental type 2 phase output (A, B signal output) Output circuit specification (standard): Open collector (NPN type, VCEO = 30 V or more LC = 30 mA or more) Output circuit specification (LDI): line driver (RS-422 compliant)	0.1% within FS	About 1,000,000	Approximately 10 mΩ	-5 v ~ +5 v	TFT color LCD display area: 71 (W) × 53 (H) mm dot configuration: 320 × 240 dot	Entering format: When connecting a plus komon / minuscomon shared transistor, the plus komon is an NPN output type (sink type), and the minuscomon is connected to the PNP output type (source type) on voltage: 12 V or more OFF voltage: 3 V or less 24 V loads: Approximately 5 meters insulating: Photoca insulated system.	Output format: Sink type / source type selection (Source type is optional: [iSC]) When connecting input units such as PLCs such as output transistors, the sink type is connected to plus chomone, the source type is connected to a minus comone: 30 V rated current: 30A Insulation method. Lapelor	Load: -9,999- +9,999 Displacement: -9,999 ~ +32,000 small points: The display position is the same as the value at the time of the comparison 0.000, 0.00, 0.0, 0, 0, 0.	Output level: Input 1.0 MV / V per 2 V load resistance: 2 kΩ or more	Speed: 4,000 times / second resolution ability: 24 Bit (binary) Effective resolution: Approximately 1/30,000 for 3.0 MV / V	DC 10 V, 2.5 V ± 10% (switching by setting) Output current 30 mA or less	-3.0 MV / V ~ +3.0 MV / V	50 kHz	Divide the measurement section, switch the hold arbitrarily to determine sample, peak, bottom, P-P, maximum value, small value, average value, and end point displacement.	Compare the upper and lower limit setting waveforms and the actual measurement waveform. The entire measurement waveform is subject to the upper and lower limit, and if one place exceeds the setting waveform, it becomes NG.	3 times / second fixed	Select Low Pass Filter (-6 DB / Oct.) 10, 30, 100, 300 Hz	Non -linear: 0.02% FS ± 1 DIGIT or less (at 3.0 MV / V) Zero drift: 0.5 μV / ℃ RTI gel lift: 0.01% / ℃ within	Adache -synchronous Bore rate 1,200 BPS to 38,400 BPS Read, write, read all comparative waveforms, write, and read measurement waveforms and judgment points.	Mitsubishi (General -purpose) You can read the full -designated values that can be linked directly to the sequencer, and you can read the points that can be written.	Read all set values, write, and read the measurement waveforms, and read points.	Read, write, and write all -specified values that can be connected to DeviceNET's compobus / d to seamlessly, can be written, read all comparative waveforms, and can be written.