Price (excluding tax)
・ Input type: Measurement temperature resistor ・ Input: PT100 ・ Output: 0-1V DC ・ Power supply voltage: 100-240 v AC
You can search for other models from each index. The displayed value is the value of the currently selected part number.
External dimensions
Adjustment
Ambient temperature
Available voltage range
Burnout
Case
Instant power outage
Insulation resistance
Mounting method
Peripheral humidity
Power-supply voltage
Response time
Select output status
Show 1
Show 2
Span adjustment range
Standard accuracy
Temperature coefficient
Tolerant resistance
Withstand voltage
Zero adjustment range
input
isolation
mass
output
panel
power consumption
self-diagnosis
Part Number
SBR-0105-0Handling Company
Shinko Technos Co., Ltd.Items marked with have different values depending on the model number.
Product Image | Price (excluding tax) | External dimensions | Adjustment | Ambient temperature | Available voltage range | Burnout | Case | Instant power outage | Insulation resistance | Mounting method | Peripheral humidity | Power-supply voltage | Response time | Select output status | Show 1 | Show 2 | Span adjustment range | Standard accuracy | Temperature coefficient | Tolerant resistance | Withstand voltage | Zero adjustment range | input | isolation | mass | output | panel | power consumption | self-diagnosis |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | W17.5 × H75 × D85mm | ・ Front potential ・ Zero adjustment: ± 2.5% ・ Span adjustment: ± 2.5% | -5 ~ 55 ℃ | 85 ~ 264V AC | ・ Select the output direction (upward, down) when input disconnection with the dip switch ・ No.2 OFF: Up, ON: Bottom | Flame -retardant resin color: Light gray | 30msec | Input-Output-between power supply: 500V DC 10mΩ or more | Din rail mounting method (Be sure to fix it with an end plate when the product is installed on the DIN rail.) | 35 ~ 85%RH (but not condensation) | 100 ~ 240V AC 50/60Hz | 1 second (0 → 90%) (average 0.5 seconds) | ・ Select the output status (normal, reverse) with the dip switch ・ No.1 OFF: Normal, ON: Reverse | ・ PWR lamp green ・ Lights when the power is turned on ・ Flashes in about 0.5 seconds in case of non -volatile memory abnormalities | ・ ERR lamp red ・ Flashes in about 0.25 seconds when input is 110%or more ・ Flashes in about 0.5 seconds when the input is -10%or less | 97.5 ~ 102.5% | Within ± 0.2% | ± 0.015%/℃ | 100Ω or more | Input-Output-Power Source: 2.0kV AC 1 minute | 0 to 2.5% | ・ Measurement temperature resistor: PT100, input range: -200 ~ 850 ° C/-328 ~ 1,562 ° f ・ Input detection current: about 0.2mA ・ Tolerant wire resistance: 10Ω or less per line | 3-port insulation (between input-output-power supply) | Approximately 80g | DC voltage: 0 ~ 1V DC | Polycarbonate | Approximately 3.5va | Monitor the CPU with a watchdog timer, restart with reset operation in the event of abnormalities |