Price (excluding tax)
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Alarm output
Ambient temperature
Analog output DC current
Analog output DC voltage
Analog output thermocouple
Backlight display color switching
Cable diameter
Compatible safety standard
Drip -proof / dustproof structure
Emissivity
Error message
External dimensions
Material
Measurement wavelength
Mounting method
Peripheral humidity
Permeability
Power-supply voltage
Reproduction (*1)
Response time
Signal processing
System accuracy (*1)
Temperature coefficient (*3)
Temperature decomposition ability
Temperature range
Viewing angle
Warm -up display
cable length
display
storage temperature
Part Number
RD-622-LMHandling Company
Shinko Technos Co., Ltd.Items marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Alarm output | Ambient temperature | Analog output DC current | Analog output DC voltage | Analog output thermocouple | Backlight display color switching | Cable diameter | Compatible safety standard | Drip -proof / dustproof structure | Emissivity | Error message | External dimensions | Material | Measurement wavelength | Mounting method | Peripheral humidity | Permeability | Power-supply voltage | Reproduction (*1) | Response time | Signal processing | System accuracy (*1) | Temperature coefficient (*3) | Temperature decomposition ability | Temperature range | Viewing angle | Warm -up display | cable length | display | storage temperature |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | ・ Maximum warning ・ Open collector output ・ Capacity: 24V DC, up to 50mA | ・ Sensor: -20 ~ 85 ℃ ・ Amplifier part: 0 to 65 ° C | 0 ~ 20 ma DC, 4 ~ 20 ma DC, load resistance 500Ω or less | 0 ~ 5 V DC, 0 ~ 10 V DC, load resistance 100 kΩ or more | K, J, Output impedance 20Ω | Normal: Green, lower limit warning output: blue, maximum warning output: Red (open collector output ON), lower limit warning output and upper limit warning output: purple (open collector output ON) | φ2.8mm | CE marking | IP65 | 0.100 ~ 1.100 | If there is a problem, display an error message. (Backlight: green) | ・ Sensor part: 31 × φ14 mm, M12 × 1 ・ Amplifier part: 89 x 70 x 30 mm (horizontal x vertical x depth) | ・ Sensor: Stainless ・ Amplifier part: Zinc diecast | 2.3 μm | ・ Sensor unit: Mounting bracket fixing method (Using mounting brackets for separately sold) ・ Amplifier part: Installation by screws | 10 ~ 95%RH (but not condensation) | 0.100 ~ 1.100 | 8 ~ 36 V DC, up to 100 MA | ± (0.1 % of reading + 1 ℃) (*2) (*1): A surrounding temperature of 23 ± 5 ° C (*2): ε = 1/response time 1 second | 1 MS (90 %response) (*4) (*4): Dynamic adaptation at the low -traffic light level | Average, peak hold, bottom hold | ± (0.3% of Reading+2 ℃) However, thermal electronics output accuracy: ± 2.5 ° C or 1% of Reading (*1): A peripheral temperature of 23 ± 5 ° C. | Either of ± 0.05 ° C/℃ or ± 0.05 %/℃ (*3): Rip -off temperature (sensor head) If it is lower than 18 ° C and higher than 28 ° C | 0.1 ° C (*2) (*2): ε = 1/response time 1 second | 50 ~ 400 ° C (*) (*): Measurement target temperature> sensor head temperature + 25 ℃ | 22: 1 | After the power is turned on, [.i.n.i.t] is displayed on the display for several seconds. After that, the temperature to be measured is displayed in the display. The backlight of the display changes depending on the alarm condition. | 3m | LCD ·5-digit ・ Backlight normal: green ・ At the lower limit warning output: Blue ・ Uptery warning output: Red ・ Lower warning output and upper limit warning output: purple | ・ Sensor: -40 to 85 ℃ ・ Amplifier part: -40 to 85 ℃ |