Rittal GmbH & Co. KG's Company Profile and Products

■Summary Wall cabinet made of glass fiber reinforced polycarbonate. Protection class IP 66. Quick-release zippered cover speeds...

• Controllers

• Control Boxes

■Summary Wall cabinet made of glass fiber reinforced polycarbonate. Protection class IP 66. Quick-release zippered cover speeds...

• Controllers

• Control Boxes

■Summary You can customize the inside of the box to suit your needs.

■Summary Use this when you want the cover to open and close with a door. The attached hole drilling template allows for hassle-...

■Summary For all PK boxes.

■Summary KX compact cabinets (stainless steel) offer the highest data quality and consistency in engineering, as well as flexib...

• Controllers

• Control Boxes

■Summary The KX E-Box (stainless steel) offers a high level of assembly comfort as well as a variety of locking systems to choo...

• Controllers

• Control Boxes

■Summary Steel wall cabinet with cover and transparent window. Protection class IP 65/NEMA 12. Bus modules and sensors from alm...

• Controllers

• Control Boxes

■Summary Painted box with plain steel cover, without gland plate. Protection class IP 66 ■Material ・Enclosure: Steel plate ・...

• Controllers

• Control Boxes

■Summary Painted box with cover made of plain steel plate, with gland plate. Protection class IP 55 ■Material ・Enclosure: Ste...

• Controllers

• Control Boxes

■Summary AX compact box with an impressive casing protrusion. The roof, bottom and sides have the same 25mm pitch pattern used ...

• Controllers

• Control Boxes

■Summary IT wall cabinet. It has a high degree of protection suitable for industrial environments. Includes a 19-inch mounting ...

• Controllers

• Control Boxes

■Summary Sheet steel operating housing for AX-based desktop TFT monitors (up to 24 inches) with VESA 75/100 mount. We guarantee...

• Controllers

• Control Boxes

■Material ・Base front and rear: Steel plate ・Cover cap: Plastic ■Included items ・2 x base elements ・2 x cover cap ・Includ...

■Summary Exhaust pressure stop made of polyamide or stainless steel with integrated membrane packing, particularly suitable for...

■Summary Reliable drainage of condensed water from inside and protection against water ingress from outside (labyrinth effect)....

■Summary Used to connect AX / KX housings. The customer is responsible for any necessary cut-out processing. ■Advantages -Spec...

■Summary Used to attach to AX housing instead of door or flat surface.

■Summary Used to attach to AX housing instead of door or flat surface. Frame structure with corner connectors on the inside. Th...

■Summary Independent enclosure made of steel plate. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and ...

• Controllers

• Control Boxes

■Summary Independent enclosure made of steel plate. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and ...

• Controllers

• Control Boxes

■Summary Freestanding stainless steel enclosure. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and doo...

• Controllers

• Control Boxes

■Summary The TS 8 articulating system made of sheet steel offers clear advantages due to its symmetrical profile in width and d...

• Controllers

• Control Boxes

■Summary Coupling system TS 8, protection class IP 66, NEMA 4, made of plain steel and painted. ■Material ・Enclosure frame: S...

• Controllers

• Control Boxes

■Summary The standard TS 8 series large enclosure also shows good shielding effectiveness over a wide frequency range. For case...

• Controllers

• Control Boxes

■Summary Interlocking system TS 8, for the construction of split doors and partition modules.

• Controllers

• Control Boxes

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. 19-inch interior with variable depth 19-i...

• Network-related Equipment

• Server Racks

■Summary TS IT vented type. For room air conditioning. 19-inch interior with variable depth 19-inch profile rail that can suppo...

• Network-related Equipment

• Server Racks

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. 19-inch interior with 19-inch mounting fr...

• Network-related Equipment

• Server Racks

■Summary TS IT vented type. For room air conditioning. 19-inch interior with 19-inch mounting frame that can support loads up t...

• Network-related Equipment

• Server Racks

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. Setup specifications including practical ...

• Network-related Equipment

• Server Racks

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. Setup specifications including practical ...

• Network-related Equipment

• Server Racks

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. 19-inch interior with 19-inch mounting fr...

• Network-related Equipment

• Server Racks

■Summary TS IT Closed type. Suitable for use in enclosure air conditioning equipment. 19-inch empty enclosure without interior,...

• Network-related Equipment

• Server Racks

■Summary Use for cable routing, fixing and storage, or as an empty housing for adjusting the numerical imbalance of LCPs connec...

• Controllers

• Control Boxes

■Summary Data rack to ensure optimal access from all directions during assembly and installation and maximum mobility when usin...

• Network-related Equipment

• Server Racks

■Summary Can be used as a compact 19-inch box, wall box, floor box or desktop box for small networks. ■Advantages - Can be use...

• Network-related Equipment

• Server Racks

■Summary Enclosure (delivered flat pack). Easy access and flexible use as wall or stand housing.

• Controllers

• Control Boxes

■Summary Wall box with removable cover and 482.6 mm (19 in) horizontal mounting surface. You can check the situation through th...

• Network-related Equipment

• Server Racks

■Summary Wall type box, 3-part type. The following items are already installed: closed gland plate with top and bottom dust bru...

• Network-related Equipment

• Server Racks

■Summary Wall type box, 3-part type. The following have already been installed: closed gland plate, top and bottom, mounting ra...

• Network-related Equipment

• Server Racks

■Summary Wall type box, 3-part type. Already installed: closed gland plate, top and bottom, with mounting rails. Protection cla...

• Network-related Equipment

• Server Racks

■Summary Wall box for small networks with a pull-out 19-inch bodywork surface and a gland plate with a brush strip on the botto...

• Network-related Equipment

• Server Racks

■Summary Compact fiber optic distribution box made of glass fiber reinforced polycarbonate with mounting plate and PG cable gla...

• Controllers

• Control Boxes

■Summary Patch panels for small fiber optic branch boxes for ST, SC, E-2000 and E-2000 Duplex couplings.

• Storage Products

• Patch Panels

■Material ・Enclosure: Steel plate 1.5 mm ・Door: Made of steel plate, 2.0 mm, with foamed polyurethane gasket applied around i...

• Controllers

• Control Boxes

■Summary The CX console system is a three-part type with four width sizes. ■Material ・Enclosure: Steel plate 1.5 mm ・Desk pl...

• Controllers

• Control Boxes

■Summary Four width sizes meet the requirements for unique monitoring or three-part CX console systems. ■Material ・Enclosure:...

• Controllers

• Control Boxes

■Summary Used to completely close the top opening when using the CX console system alone. There are other model numbers availa...

■Summary One-piece console for operation and monitoring. With large mounting plate, high degree of protection IP 55, available ...

• Controllers

• Control Boxes

■Summary Safely stores all your PC components, from your monitor and computer to your keyboard. It has excellent operability an...

• Protective Materials & Equipment

• Dustproof Rack

■Summary Work desk (chipboard) for industrial workstations.

■Summary The aluminum housing has high thermal conductivity and provides ideal natural cooling. Light but sturdy. Protection cl...

■Summary The aluminum housing has high thermal conductivity and provides ideal natural cooling. For smaller panels and control ...

■Summary Elegantly designed operating housing (made of extruded aluminum profile). Ideal for small operation panels. Multifacet...

■Summary Modern design command panel with sheet steel handle strip, 130 mm diameter support arm cut-out for CP 60/120/180 suppo...

■Summary Attach to the connecting parts using two clamp screws.

■Rotation angle/swivel area Approximately 305°, can be fixed with a clamp lever

■Rotation angle/swivel area Approximately 305°, can be fixed with a clamp lever

■Rotation angle/swivel area Approximately 305°, can be fixed with a clamp lever

■Summary Housing solutions with cutouts for push buttons that meet the requirements of the food and luxury goods industry. The ...

• Switches

• Switch Boxes

■Summary Housing solutions that meet the requirements of the food and luxury goods industry. The silicone packing fits tightly ...

■Summary Housing solutions that meet the requirements of the food and luxury goods industry. The top panel has a 30° forward sl...

■Summary Housing solutions that meet the requirements of the food and luxury goods industry. The top panel has a 30° forward sl...

■Summary The HD System Enclosure is a large, flexibly mateable enclosure solution for hygienic environments that are regularly ...

■Summary customized solution. HD System Enclosures are large, mateable enclosure solutions for use in hygienic environments tha...

■Summary Monitors, PCs and other display components are hygienically and reliably protected in the operating housing. The 30° r...

■Summary A hygienically designed cabinet for use with printers or other PC components on the manufacturing floor. This product ...

■Summary Critical safety equipment, easily accessible and hygienically protected - fire extinguishing housings can be installed...

■Summary A water-cooled heat exchanger suitable for use in hygienic production environments in the food and luxury goods indust...

• Temperature Control

• Heat Exchangers

■Summary The rugged stainless steel enclosure includes a cam system that allows for quick and safe construction of a wide range...

• Controllers

• Control Boxes

■Summary Freestanding stainless steel enclosure. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and doo...

• Controllers

• Control Boxes

■Summary Freestanding stainless steel enclosure. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and doo...

• Controllers

• Control Boxes

■Summary Freestanding stainless steel enclosure. Sturdy enclosure body with two mounting surfaces, rear panel (screwed) and doo...

• Controllers

• Control Boxes

■Summary AE compact enclosure, stainless steel, including mounting plate. ■Material ・Enclosure: Stainless steel ・Door: Made ...

• Controllers

• Control Boxes

■Summary Standard in the manufacture of various panels in high-quality stainless steel 1.4301 (AISI 304): enclosure frame with ...

• Controllers

• Control Boxes

■Summary Tested to the highest degree of protection and European and American standards, allowing for worldwide use. Made of hi...

• Controllers

• Control Boxes

■Summary Stainless steel connection system TS 8 1.4301 (AISI 304), including mounting plate. Protection class IP 55 ■Material ...

• Controllers

• Control Boxes

■Summary Stainless steel connection system TS 8 1.4301 (AISI 304), including mounting plate. Meets protection class IP 66, NEMA...

• Controllers

• Control Boxes

■Summary One-piece console made of stainless steel 1.4301 (AISI 304). There are 4 width sizes. Assembled unit with high degree ...

• Controllers

• Control Boxes

■Summary VX SE type PC enclosure system made of stainless steel 1.4301 (AISI 304). Design principle similar to steel PC. The pr...

• Protective Materials & Equipment

• Dustproof Rack

■Summary Ex box with hinged door, plastic ■Material ・Enclosure: Glass fiber reinforced unsaturated polyester, surface resista...

• Controllers

• Control Boxes

■Summary EX box with screwed cover, made of stainless steel ■Material ・Enclosure: Stainless steel, 1.4301 (AISI 304) ・Cover:...

• Controllers

• Control Boxes

■Summary EX box with hinged door, made of stainless steel ■Material ・Enclosure: Stainless steel, 1.4301 (AISI 304) ・Door: St...

• Controllers

• Control Boxes

■Summary The standard type VX25 series large enclosure also shows good shielding effectiveness over a wide frequency range. For...

• Controllers

• Control Boxes

■Summary Achieves high EMC protection with automatic potential equalization using fixed parts and EMC-specific packing.

■Advantages ・Automatic potential equalization using fixed parts ・High EMC protection with special EMC packing ・Easy position...

■Product description Earthquake countermeasure kit for expansion equipment of VX connected enclosure system. ■Note The large e...

■Summary Used to securely secure earthquake-resistant enclosures to the floor. Externally placed M6 metric screw for a secure c...

■Summary Seismic kit for the equipment of the interlocking system TS 8. ■Product description Rittal's TS 8 enclosure 8806.500 ...

■Summary Outdoor enclosure for wall or pole mounting. Double enclosure concept, outer enclosure with cutouts at the bottom and ...

• Storage Products

• Control Cabinets

■Summary Single-walled housing systems are available in single-door and double-door versions. Ready for use outdoors, for stati...

• Storage Products

• Control Cabinets

■Summary Outdoor enclosure with 100 mm transport base and omnidirectional rain cover. Side panels, rear panels, and doors are a...

• Controllers

• Control Boxes

■Summary Connectable double-walled outdoor enclosure. Includes 100 mm base, door, rear panel and seamless weatherproof top pane...

• Controllers

• Control Boxes

■Summary Aluminum double wall enclosure for outdoor installation. Durability RC 2. *This product is used for industrial/IT proj...

• Controllers

• Control Boxes

■Summary AX plastic housings are ideal for outdoor applications. Numerous mounting bosses in the housing enable unique internal...

• Controllers

• Control Boxes

■Summary AX plastic housings with see-through windows are ideal for outdoor applications. Numerous mounting bosses in the housi...

• Controllers

• Control Boxes

■Summary Hold the door open. No machining to the housing is required for installation. ■How to install ・Attach directly to th...

■Summary To achieve reliable access protection. Separate the operational and technical levels. ■Surface ・Door: Electrostatic ...

■Summary The wall bracket complies with UL standards and is easily fixed from the outside.

There are other model numbers available.

There are other model numbers available.

There are other model numbers available.

There are other model numbers available.

■Included items ・Rod lock, complete set ・Keyhole plate ・Lock case with double bit insert ・Lock: Double bit No.5/3 mm ・Fixi...

■Included items ・Rod lock, complete set ・Fixing parts for rod lock (3-point locking system)

■Summary A board with a built-in busbar. ■Function method Shock-proof busbar board for secure component mounting and connectio...

■Summary Used for connecting round cables.

■Summary Switches and protection devices can be mounted. ■Note -Different adapter types are required depending on the desired ...

■Summary Switches and protection devices can be mounted.

■Summary Expands on-board mounting options and allows use of a wider range of equipment.

■Summary For RiLine compact busbar systems. ■Connection method ・Used for protection of connected consumer devices - Inspectio...

• Switches

• Disconnects

■Summary Used for fixing launch combinations and reversing launch combinations on unit adapters (comfort type) with adjustable ...

■Summary Used to secure direct-on motor starters of different lengths.

■Summary Used for fixing launch combinations and reversing launch combinations on unit adapters (comfort type) with adjustable ...

■Summary Used to fix reversing startup combinations.

■Summary For mounting on operating and display devices in combination with a modular front configuration and a protection bar. ...

■Summary With 5 different raster positions for a maximum opening angle of approximately 85°

■Summary Used to improve the mechanical strength of copper plate bus bars or bus bar packages with improved short circuit stren...

• Metallic Materials

• Bronze Bar

■Summary In combination with screw connections, it is used for mechanical connections of connecting elements such as bracket co...

• Metallic Materials

• Bronze Bar

■Summary For direct connection of round conductors (95 mm^2 - 300 mm^2) (single and multi-core). ■Material ・Connection clamp:...

• Metallic Materials

• Bronze Bar

■Summary For connecting copper plate flex bars. ■Material ・Connection plate: Made of E-Cu ・Pressure piece: Stainless steel ...

• Metallic Materials

• Bronze Bar

■Summary For connecting crimp terminals to Flat-PLS busbar systems with 2 to 4 bars per conductor. ■Material ・Connection plat...

• Terminals / Interfaces

• Connector Terminals

■Summary Direct connection terminals, connection plates, busbar claws or used to secure connection sets to busbar systems using...

• Metallic Materials

• Bronze Bar

There are other model numbers available.

• Metallic Materials

• Bronze Bar

■Summary Can be used as a general-purpose spacer for Maxi-PLS and copper plate flex bars.

• Fastening Components

• Spacers

■Summary Contact protection on the sides of the busbar structure.

■Summary Electric shock prevention measures behind the busbar structure There are other model numbers available.

■Summary Rear contact protection at busbar connections between enclosures.

• Fastening Components

• Spacers

■Summary Please cut to the required individual length. It can be easily attached to and removed from the grip groove of the bas...

■Summary For added stability to prevent contact from the sides of the cover frame.

■Summary To observe the clearance required by UL 508 for feeder circuits for 3-pole RiLine busbar connections.

■Summary For busbar systems with a center spacing of 60 mm. ■Note ・The specifications (technical data) listed may differ from...

• Tools

• Adapters

■Summary 1-pole additional module for building a 4-pole 3-pole connection adapter (SV 9342.310/9342.320). ■Material ・Cover: A...

■Summary CB unit adapter for versatile and simplified installation of circuit breakers. There are other model numbers available.

• Tools

• Adapters

• Tools

• Adapters

■Summary Used to install ISV expansion modules within the AX/AE enclosure. ■Material ・Installation kit: Made of steel plate, ...

■Summary For covering empty built-in surfaces. The cover can be sealed. There are other model numbers available.

■Summary Comes with mounting plate. The cover can be sealed. ■Material ・Cover: Polystyrene ・Mounting plate: Steel plate, gal...

■Summary Used for installing terminal blocks, switches, etc. Comes with mounting rail 35/15 mm. The cover can be lead sealed. ...

■Summary For use with connected embedded equipment. The cover can be sealed. ■Material ・Cover: Polystyrene ・Support rail: Ma...

■Summary Suitable for use with NH fuse disconnectors for the construction of mounting plates. The cover can be sealed. ■Notes ...

■Summary For mounting NH fuse switch disconnectors, size 2/3 on the mounting plate.

■Summary NH Slimline fuse switch disconnector for sizes 00 to 3 (3 positions, busbar center spacing 100/185 mm). ■Note To ensu...

■Summary Used to install commercial circuit breakers up to 250 A or 630 A.

■Summary Open module for internal measurements. ■Notes on installation 1WU and at least 1HU of contact prevention module/side-...

■Summary Block any sockets (outlets) that are not currently in use. ■Product description Slot covers can be used to cover unus...

■Summary One or two single-phase or three-phase power supplies, redundancy supported by changing the insertion direction of the...

• Drive Mechanisms & Components

• Linear Guide Rails

■Summary A mixture of various modules can be inserted into the power supply rail. ■Product description The modular system faci...

■Summary Used to secure the PSM power rail inside the network rack.

■Summary Completed connection cable for power system modules.

• Cables

• Electric Power Cables

■Summary Connection cable (complete) with connection connectors C13 (socket) and C14 (plug).

• Cables

• Electric Power Cables

■Summary For protection of all end equipment connecting cables in case of inadvertent interruption of power supply.

• Cables

• Electric Power Cables

■Summary Install it on the upstream side of the power rail. All three-phase feed points on the power rail can be equipped with ...

■Summary An outlet bar housed in an aluminum duct. They are available in different lengths, containing various functional eleme...

• Connectors

• Industrial Connectors

■Summary For measuring current consumption of connected equipment. Pin pattern: "Shuko", you can choose how to attach it.

• Connectors

• Industrial Connectors

• Meters & Instruments

• Ammeters

■Summary Used to set parameters and display measured values ​​for the REM 801 power analyzer and its expansion modules.

• Input & Display Devices

• Liquid Crystal Displays (LCD)

■Summary Used to connect distant measurement points. ■Included items ・2 connection modules ・2 bus connectors (left and right...

■Product description Use to expand the modular power analyzer REM 801 to up to 92 current measurement channels or connect remot...

• Connectors

• Industrial Connectors

■Summary The digital input module extends the functional range of the REM 801 power analyzer with 14 digital inputs.

• Connectors

• Industrial Connectors

■Summary Complete fan unit that mounts on the surface without tools. Ventilation performance: 20 - 1160m^3/h. Protection class ...

• Temperature Control

• Cooling Fans

■Summary Fan unit with complete EMC shielding that can be installed on the surface without tools. Ventilation performance: 20 -...

• Temperature Control

• Cooling Fans

■Summary For ventilation by convection, filter louvers can be installed at the top and bottom of the enclosure. ■Advantages - ...

• Temperature Control

• Cooling Fans

■Summary For ventilation by convection, filter louvers can be installed at the top and bottom of the enclosure. ■Advantages - ...

• Temperature Control

• Cooling Fans

■Summary A type of RTT filter fan with excellent energy efficiency that uses EC technology. Above 180 m^3/h, integrated control...

• Temperature Control

• Cooling Fans

■Summary The new generation of roof fans is a system for all sizes. The same cutout is applied to all output classes. Efficient...

• Temperature Control

• Cooling Fans

■Summary The new generation EC type roof fan is a system for all sizes. The same cutout is applied to all output classes. Effic...

• Temperature Control

• Cooling Fans

■Summary This is a rack mount type fan that is installed directly on the 19-inch equipment mounting surface. This installation ...

• Temperature Control

• Cooling Fans

■Summary This is a rack mount type fan that is installed directly on the 19-inch equipment mounting surface. This installation ...

• Temperature Control

• Cooling Fans

■Summary 2 HE compression fans with a maximum throughput of 320 m^3/h. The noise generated is low at 52 dB, so it can be used i...

• Temperature Control

• Cooling Fans

■Summary Featuring the proven Blue e+ technology, Blue e+ S cooling units offer the world's highest level of energy efficiency....

• Cooling Equipment

• Cooling Systems

■Summary Blue e+ is an energy-efficient wall cooling unit with cooling capacity from 1,600 W to 5,800 W. Thanks to the implemen...

• Cooling Equipment

• Cooling Systems

■Summary Blue e+ Outdoor is an energy-efficient wall cooling unit with cooling capacity from 1,500 W to 5,000 W. With their hig...

• Cooling Equipment

• Cooling Systems

■Summary Energy efficient wall cooling unit Blue e+ chemical version with cooling capacity from 1,600 W to 5,800 W. Thanks to t...

• Cooling Equipment

• Cooling Systems

■Summary The bundle uses Blue e+ technology to best address the energy-efficient cooling requirements of IT racks. When combine...

■Summary Blue e wall cooling unit is highly energy efficient. They have a cooling capacity of 300 W to 4,000 W, with versions a...

• Cooling Equipment

• Cooling Systems

■Summary Energy-efficient Blue e wall cooling units with cooling capacities from 500 W to 2,500 W. E-Comfort controller and ele...

• Cooling Equipment

• Cooling Systems

■Summary Energy efficient Blue e wall cooling unit with 500W cooling capacity. E-Comfort controller and refrigerant R1234yf are...

• Cooling Equipment

• Cooling Systems

■Summary Energy-efficient Blue e wall cooling units with cooling capacities from 1,000 W to 1,500 W. An e-comfort controller, e...

• Cooling Equipment

• Cooling Systems

■Summary Energy-efficient Blue e wall cooling units with cooling capacities from 500 W to 2.500 W. An e-Comfort controller and ...

• Cooling Equipment

• Cooling Systems

■Summary Enclosure heaters that regulate relative humidity also prevent condensation from forming within the enclosure by preve...

• Heat Sources

• Heaters

■Summary Enclosure heaters that regulate relative humidity also prevent condensation from forming within the enclosure by preve...

• Heat Sources

• Heaters

■Summary High-performance, lightweight air conditioning units with Peltier technology ensure energy-efficient air conditioning ...

• Heat Sources

• Heaters

■Summary Waterproof hoods prevent water ingress, especially in food industry applications. When used in conjunction with standa...

• Storage Products

• Waterproof Boxes

■Summary Multi-function enclosure (MFG) built-in roof-type direct ventilation cooling system. This product is ideal for very ef...

• Cooling Equipment

• Cooling Systems

■Summary High quality pleated filter technology significantly increases flow rate compared to traditional fleece filters, resul...

• Filters

• Air Filters

■Summary If there is an increased dust load, we recommend using a filter mat. It also makes cleaning the equipment easier. Depe...

• Filters

• Air Filters

■Summary If there is an increased dust load, we recommend using a filter mat. It also makes cleaning the equipment easier. Depe...

• Filters

• Air Filters

■Summary We recommend the use of washable metal filters, especially if the cooling unit is used where the surrounding air conta...

• Filters

• Air Filters

■Summary Spare filter mat for roof fans, filter fans or thermoelectric coolers for effective protection of enclosure components...

• Filters

• Air Filters

■Summary If the current filter fan/filter louver mounting cutout needs to be closed to increase the degree of protection, a bli...

■Summary Front exhaust grate 2 HE for the compression fan to exhaust warm air from the top of the enclosure. Two grids can be u...

■Summary The use of filter mats is essential to increase the degree of protection of the roof vent SK 3148.007.

• Filters

• Air Filters

■Summary The IoT interface is a central element for intelligent networking of Rittal cooling solutions and sensors for monitori...

• Temperature Control

• Temperature Controllers

■Summary The adapter enables intelligent networking of Blue e-series cooling units in conjunction with the IoT interface (3124....

• Tools

• Adapters

■Summary It is possible to monitor 8 digital inputs and control 4 relays. ■Product description Via software, the relays are li...

• Tools

• Adapters

■Summary For measuring current/energy and switching on/off power consuming devices such as fans. ■Product description Current ...

• Meters & Instruments

• Voltmeters

■Summary For monitoring various parameters inside an enclosure or space. ■Advantages ・Fast connection and automatic recogniti...

• Sensors

• Temperature Sensors

■Product description CMC III CAN bus access allows electromagnetic handles and readers to be connected to the CMC III system or...

• Sensors

• Door Sensors

■Summary An IC card for personal authentication and a CMC III card reader are required.

■Summary CMC III power supply unit compatible with various voltages. ■Product description The power supply unit matches the de...

• Power Supplies

• Power Supply Units

■Summary Power class (cooling capacity) 375 to 5,000 W. Ideal for use in harsh environments. Comfortable and compatible with va...

• Temperature Control

• Heat Exchangers

■Summary Power class (cooling capacity) 7,000 W. Ideal for use in harsh environments. With thermostatically controlled solenoid...

• Temperature Control

• Heat Exchangers

■Summary It is used by attaching it to the top panel. Cooling capacity 1.87 kW to 4 kW. Standard protection rating is IP 55. Id...

• Temperature Control

• Heat Exchangers

■Summary Water-cooled heat exchanger in the VX25 articulated enclosure system. Suitable for VX25 enclosures with depths of 600 ...

• Temperature Control

• Heat Exchangers

■Summary Blue e+ chillers are efficient, flexible and compact. Cooling water sent to water-cooled heat exchangers, etc. can be ...

• Cooling Equipment

• Cooling Systems

■Summary The stand-alone Blue e+ chiller enables economical central cooling with chilled water. By applying microchannel techno...

• Cooling Equipment

• Cooling Systems

■Summary Roof-mounted or stand-alone Toptherm chillers are flexible and compact. They enable economical central cooling of cool...

• Cooling Equipment

• Cooling Systems

■Summary The VX25 Toptherm chiller is small and can be used in a variety of applications. Chiller and enclosure go together per...

• Cooling Equipment

• Cooling Systems

■Summary Rack-based cooling for one or two IT racks. The cooling capacity is continuously adapted by a variable power compresso...

• Network-related Equipment

• Server Racks

■Summary Ideal for cooling small to medium sized IT applications. ■Advantages ・Maximum energy efficiency thanks to EC fan tec...

• Network-related Equipment

• Server Racks

■Summary Cooling with high performance compact resistors. The LCP (Liquid Cooling Package) exhausts air from the rear side of t...

• Network-related Equipment

• Server Racks

■Summary Parallel temperature management for placement inside rows of enclosures. Warm air is expelled from the side of the equ...

• Network-related Equipment

• Server Racks

■Summary Cooling with high performance compact register (heat exchanger). The LCP (Liquid Cooling Package) draws air from the r...

• Network-related Equipment

• Server Racks

■Summary Line air conditioning for installation within rows of enclosures (racks). Warm air is drawn in from the back of the un...

• Network-related Equipment

• Server Racks

■Summary LCU CW basically consists of a water-cooled heat exchanger, a fan, and a controller. Dissipates heat from network rack...

• Cooling Equipment

• Cooling Systems

■Summary Reliable, energy-efficient room cooling for data centers with maximum precision and reliability. The room cooling syst...

• Cooling Equipment

• Cooling Systems

■Summary Specialized in cooling IT applications like LCP or water-cooled heat exchangers. It is distinguished by safety-related...

• Cooling Equipment

• Chiller Units

■Summary Deliver reliable cooling for your project-specific requirements. CyberCool and Explorer Line air and water chillers fr...

• Cooling Equipment

• Chiller Units

■Summary Connection cables and extension cables for network components of various national specifications.

■Summary Connects CAN bus units to information and power transfer functions. ■Product description It is used to form a bus bet...

There are other model numbers available.

There are other model numbers available.

There are other model numbers available.

There are other model numbers available.

■Summary A performance package for smooth machining on Perforex BC machining centers and Perforex MT S milling terminals. ■Pro...

■Summary Tool mounting support used when changing or adjusting tools such as drills, milling cutters or taps. Suitable for SK 3...

■Summary Magnetic bar with stripping ring for picking up magnetic shavings. Convenient and ideal for machine cleaning. It can r...

■Summary Can be used to deburr any holes or edges. The double-edged coated blade ensures a good cut every time. ■Specification...

■Summary Additional zero points on Perforex BC machining centers and Perforex MT S milling terminals. ■Product description The...

■Summary Elastic drill-fixing collet for Perforex BC machining centers and Perforex MT milling terminals. There are other mode...

■Summary Elastic collet for securing taps for Perforex BC machining centers and Perforex MT milling terminals.

■Summary FRX-16 mm Extension for standard 6 mm milling cutter with collet chuck. ■Product description Extension for standard 6...

■Summary A tool set for making screw holes.

■Summary Used to machine metric threads of any size. Auxiliary tools for Perforex BC machining centers and Perforex MT milling ...

■Summary The Perforex Laser Center has been developed to automate the mechanical processing of standard enclosures. Perforex LC...

• Machining / Machine Tools

• Laser Machinery

■Summary Used on Perforex BC machining centers and Perforex MT milling terminals to house milling cutters, drills and other too...

■Summary Machine tap for Perforex BC machining centres, Perforex MT S milling terminals and Perforex LC laser centres. ■Specif...

■Summary Micro-dose cutting oil for tool lubrication for Perforex BC machining centers, Perforex MT milling terminals and LC la...

■Summary Laser lens protection glass for Perforex LC laser center. ■Advantages ・Protection against dirt on the lens part ・Co...

■Summary For media supply in the laser head of Perforex LC laser centers.

■Summary Lubricant for replacing empty containers in the central lubrication system for the drive units of Perforex LC laser ce...

■Summary A cleaning spray used to clean the lens and cover glass of the Perforex LC Laser Center. ■Advantages ・No static elec...

■Summary Dry cloth used to clean the lens and cover glass of the Perforex LC Laser Center.

■Summary The foot switch (including connecting cable) is for the busbar processing machine CW 120-S product series.

■Summary Used for circular punching ■Included items ・5 female molds ・Male type (punch) 5 pieces ・Plastic case ■Maximum pla...

• Machining / Machine Tools

• Cutting Tools

■Summary Used for circular punching There are other model numbers available.

• Machining / Machine Tools

• Cutting Tools

■Summary Used for circular punching ■Note ・When using a spanner, please use a tension bolt with a ball bearing. ・For other s...

• Machining / Machine Tools

• Cutting Tools

■Product description Used for punching out squares. A hydraulic puncher is used for the punching mold. ■Advantages ・Chip disc...

• Machining / Machine Tools

• Cutting Tools

■Product description Used for punching special contours. A spanner or hydraulic puncher is used for punching the die. ■Advanta...

• Machining / Machine Tools

• Cutting Tools

■Product description Used to punch out rectangles for connectors. A hydraulic puncher is used for the punching mold. ■Advantag...

• Machining / Machine Tools

• Cutting Tools

■Product description Used for circular punching. A spanner or hydraulic puncher is used for punching the die. ■Maximum process...

• Machining / Machine Tools

• Cutting Tools

■Product description Used for circular punching. A spanner or hydraulic puncher is used for punching the die. ■Note ・When usi...

• Fixtures

• Button Dies

■Summary Used for circular punching ■Included items ・Female mold (die) 6 pieces ・Male type (punch) 6 pieces ・Tension bolt w...

• Machining / Machine Tools

• Cutting Tools

■Summary Ergonomic, fast and precise cutting of wiring ducts, cable duct covers and support rails using the semi-automatic Seca...

• Machining / Machine Tools

• Cutting Machinery

■Summary The four-drawer drawer system in the left-hand interior space of the Secarex AC 18 provides ample storage space for to...

■Summary Built-in tray system for convenient storage of cable ducts and top hat rails (DIN rails) in the right-hand internal sp...

■Summary Manual profile (rail) cutter for burr-free cutting of C-rail 30/15 and support rails TS 35/7.5 and TS 35/15 (DIN rail)...

• Machining / Machine Tools

• Metal Cutting Shears

■Summary For manual cutting of wiring ducts. With end stop for adjustable length for the material to be processed. Anodized alu...

• Tools

• Duct Cutters

■Summary The assembly frame is movable, and the tilt and height can be adjusted depending on the type.This is a work table for ...

• Storage Products

• Portable Workbenches

■Summary Used when rotating the movement spindle of the assembly frame using a cordless drill driver. For assembly frame 150 MN...

■Summary Assembly frames 150 MN, 200 EN, and 300 ENH can be expanded to a maximum of 1,900 mm.

■Summary Used to securely fix the cabinet onto the assembly frame 150 MN, 200 EN, 300 ENH. ■Product description Used for secur...

■Summary Used to insert the mounting plate into the enclosure from the side. For assembly frame 300 ENH.

■Summary Adapter plug for power supply for assembly frames 200 EN and 300 ENH.

• Connectors

• Battery Connectors

■Summary Power supply unit for battery charging station for assembly frames 200 EN and 300 ENH.

• Connectors

• Battery Connectors

■Summary Used for hanging wire reels, etc. on assembly frames 150 MN, 200 EN and 300 ENH.

■Summary We support wiring work for assembly frames 150 MN, 200 EN, and 300 ENH.

■Summary Used to securely fix the mounting plate onto the assembly frame 150 MN, 200 EN, 300 ENH.

• Tools

• Clamps

■Summary A semi-automatic cutter that allows you to freely adjust the length of the wire. ■Specifications ・With operation pan...

• Tools

• Cable Cutters

■Summary Semi-automatic machine that allows wire stripping of various cross-sections ■Specifications ・Touch screen display ・...

■Summary Electropneumatic automatic strip crimping device for insulated sleeve terminals (bulk). ■Advantages ・Easy operation ...

• Machining / Machine Tools

• Crimping Machinery

■Summary Electric automatic strip crimping device for reel type chain type sleeve terminals. ■Advantages ・Easy operation ・Qu...

• Machining / Machine Tools

• Crimping Machinery

■Summary This is an electro-pneumatic automatic crimping machine with a 5-magazine that can process reel type insulated ferrule...

• Machining / Machine Tools

• Crimping Machinery

■Summary Movable wiring workbench. The height is adjustable and can be used freely even in the factory. It enables wire process...

• Storage Products

• Portable Workbenches

■Summary A storage shelf set for mounting below the table plate. Storage shelves are available in a variety of depths, so you c...

■Summary An equipment carrier unit suitable for the automatic cutting machine C8+ and a storage shelf for label printers from c...

■Summary Equipment carrier unit suitable for automatic crimping machines RC or R8 E. Fasten to the right side of the wiring tab...

■Summary Used for fixing all common monitors (with Vesa 75/100) with diagonal screen size up to 32 inches. ■Advantages ・Secur...

• Clamps & Fasteners

• Monitor Arms

■Summary Lifting and transport equipment for enclosures and tethered enclosures up to 4.80 m. ■Advantages ・Supports work when...

• FA Equipment

• Transfer Machinery

■Summary The LT 1000 storage and transport cart facilitates the storage, order picking and handling of flat parts. ■Advantages...

• FA Equipment

• Transfer Machinery

■Summary 13-piece tool set. Comes with an easy-to-use, foldable and lockable grip. ■Specifications ・PH 1 - SL 4 x 0.8 mm ・PH...

• Tools

• Screwdrivers

■Summary driver set. Elongated grip, high performance shaft, non-migrating insulation. ■Advantages -Ergonomically designed han...

• Tools

• Screwdrivers

■Summary A bit holder with an ergonomic grip that fits comfortably in your hand. ■Advantages ・Strong magnet increases holding...

• Tools

• Bit Holders

■Summary Practical 7 piece set of short size, high quality bits with magnetic holder. ■Advantages ・One-handed operation ・Can...

• Tools

• Tool Sets

■Summary For processing sleeve terminals according to DIN 46228 Part 1 (without insulating collar) and sleeve terminals accordi...

• Tools

• Crimpers

■Summary Crimping pliers for square or hexagonal crimp. For processing ferrule terminals according to DIN 46228 Part 1 (without...

• Tools

• Crimpers

■Summary Used for processing flat plug-in terminals (without insulation coating). ■Advantages ・With locking mechanism ・Since...

• Tools

• Crimpers

■Summary For processing sleeve terminals according to DIN 46228 Part 1 (without insulating collar) and sleeve terminals accordi...

• Tools

• Crimpers

■Summary For processing sleeve terminals according to DIN 46228 Part 1 (without insulating collar) and sleeve terminals accordi...

• Tools

• Crimpers

■Summary Used for processing crimp terminals (without insulation coating). ■Advantages ・With locking mechanism - Optimized le...

• Tools

• Crimpers

■Summary Used for processing crimp terminals with insulation coating and crimp connection terminals. ■Advantages ・Color marki...

• Tools

• Crimpers

■Summary Mantle jet nozzle for micro-volume lubrication for Perforex BC machining centers and Perforex MT milling terminals.

• Nozzles

• Injection Nozzles

■Summary Silicone rings for pressure plates on Perforex MT and Perforex BC

■Summary workpiece support stand

■Summary Clamp fingers for pneumatic clamp units on Perforex BC machining centers.

■Summary Stripping blade set for automatic cutting machine C8 / C8+

■Summary Stripping knife set for automatic stripping equipment.

■Summary Feeder pot for sleeve terminals (loose).

■Summary Replacement of worn cutter on wiring duct cutting center Secarex AC 18. ■Product description Used to replace worn cut...

■Summary Secarex AC 18 wiring duct cutting unit cutter blade holder.

■Summary The oil change set includes a filling funnel, a 0.5 L measuring cup, a hydraulic connector for exhaust, and a funnel a...

■Summary Used for perfect illumination of every nook and cranny in IT rack systems and IT cabinets. ■Advantages ・Manual or au...

• Light Sources

• Led Light Sources

■Summary For forced ventilation. It is also possible to add a fan to the unit (optional). Simple connection technology and ener...

■Summary Adjust the height from the floor. Fixing screw M12. You can also choose a product with a hex socket, which allows adju...

■Summary For transportation, attach directly to the enclosure.

• Conveyors

• Casters

■Summary Side panel for VX, screw-on, made of sheet steel. ■Advantages -Uses a clip-type side panel holder, so installation re...

■Summary For redirecting cables to suit your system and storing spare cables and overlong cables. Elements can be used individu...

■Summary Attach to the side of a 482.6 mm (19 inch) mounting rail for flexible, system-optimized cable management.

■Summary For storage of large quantities of cables and for fastening to the sides of 482.6 mm (19") profiles and mounting frame...

■Summary 1U. Four integrated fiber optic cable guide brackets allow optimal sorting of up to 48 fiber cables. ■Product descrip...

■Summary Cable bundles can be neatly organized and processed. Fixed at 19 inches. Connecting comb. ■Applications Cable managem...

■Summary The processing unit is the central unit of the monitoring system CMC III. In addition to the integrated sensors, up to...

• Network-related Equipment

• Network Appliances

■Summary Used to connect CMC-TC sensor. ■Product description Used to connect 5 access sensors (connected in series) or smoke d...

• Network-related Equipment

• Network Appliances

■Summary Handle, can be integrated into various enclosure systems. ■Advantages ・Independent access management and unlocking u...

■Product description ADO (Automatic Door Opener) Specification VX IT Control unit for automatically opening transparent doors w...

• Network-related Equipment

• Network Appliances

■Summary VX IT transparent door for ADO (automatic door opening)

■Summary To open automatically when an alarm occurs

■Summary Connection and extension cables with various plugs and sockets (Shuko/C19/C20).

• Cables

• Cord Sets

■Summary For storing CMC III components. ■Product description Depending on the specification, the mounting unit can accommodat...

■Summary Micro Data Center Level E is modular, IT-safe and suitable for many applications such as KRITIS areas, Industry 4.0 en...

■Summary DET-AC Plus is a small fire alarm and extinguishing device with smoke extraction system and mounted on a 1-height unit...

• Sensors

• Notifiers

■Summary In combination with the DET-AC III Slave device, it is possible to extinguish fires in up to 5 connected racks. ■Prod...

• Sensors

• Notifiers