U-Bolts
Helisat Screws
Insert Nuts
Coupling Nuts
Clinch Nuts
Joint Nuts
Studs
Spring Pins
Spacers
Clinching Fasteners
Sprues
Self-Tapping Screws
Miniature Screws
Hexagon Nuts
Button Head Socket Cap Screws
Hexagon Head Cap Screws
Head Hollow Hex Bolts
Square Nuts
Flange Bolts
Floating Nuts
Blind Nuts
Blind Rivets
Round Nuts
Round Head Rivets
Spherical Washers
Clip Nuts
Plastic Engineering Compounds
Spring Guide Pins
Retaining Rings
Whitworth Screws
Inch Screws
Screw Thread Inserts
Unified Thread Standards
Taptite Screws
Knock Pins
Cap Screws
Washer Head Screws
Plastic Screws
Small Binding Screws
Metal Washers
Pilot Pins
Thin Head Hex Screws
Tangless® Inserts
Fine Thread Bolts
Plastic Nuts
Stop Pins
Grub Screws
Cotter Pins
Countersunk Head Nails
Round Countersunk Screws
Small Pan Head Screws
Small Truss Head Screws
Gauge Nuts
Cap Nuts
Knurled Nuts
Clamping Screws
Nord Lock Washers
Long Nuts
Hanging Brackets
Socket Bits
Snap Ring Pliers
Hexagon Slotted Nuts
Whetstones
Ultra Low Profile Screws
Set Screws
Disc Springs
Wrenches
Rivets
Self-Locking Nuts
Screwdrivers
Thumb Screws
Anchor Bolts
Adjuster Bolts
Spring Washers
Bossard Co., Ltd.
650+ people viewing
Last viewed: 3 hours ago
Also called special low head cap or hexagon socket cap. This original Bossard product was developed to solve the problem of not...
Bossard Co., Ltd.
570+ people viewing
Last viewed: 9 hours ago
A screw with a washer pre-installed is also called a sems. Since the screw is rolled after the washer is assembled using a dedi...
Bossard Co., Ltd.
560+ people viewing
Last viewed: 1 day ago
The advantages of FASTEKS KLIPKO® cage nuts are that they are easy to install, flexible and stable. FASTEKS KLIPKO® clip fasten...
Bossard Co., Ltd.
530+ people viewing
Last viewed: 50 minutes ago
A hexagon socket head bolt with a lower head (approximately 55 to 65%) compared to general hexagon socket head bolts. Also call...
Bossard Co., Ltd.
490+ people viewing
Last viewed: 1 day ago
A 6-lob cap is a TORX®-type screw with a hexagonal star-shaped recess (drive), also known as a hexalobula, hex lobe, or hex lob...
Bossard Co., Ltd.
460+ people viewing
Last viewed: 1 day ago
The 6-lob low-head cap has a lower head (up to about 65%) than a typical 6-lob cap, and it takes up less space after tightening...
Bossard Co., Ltd.
460+ people viewing
Hexagon socket head bolts made of materials such as RENY and PPS PEEK. RENY, an engineering plastic reinforced with 50% glass f...
Bossard Co., Ltd.
410+ people viewing
Last viewed: 11 hours ago
A self-tapping screw that can be screwed into a prepared hole in a thin steel plate, etc. by self-tapping. Also known as a hexa...
Bossard Co., Ltd.
380+ people viewing
Last viewed: 1 hour ago
Also known as button caps, button bolts, and button cap screws, they have a lower, rounded head compared to hexagon socket head...
Bossard Co., Ltd.
360+ people viewing
Last viewed: 1 day ago
■Features It is characterized by a round convex head with a part of the sphere cut out. The English name is truss head screw. I...
Bossard Co., Ltd.
340+ people viewing
Last viewed: 6 hours ago
A screw with a plus or minus groove at the tip, and is called a set screw or insect screw by various names. The head is the sam...
Bossard Co., Ltd.
330+ people viewing
A wire insert for reinforcing female threads in light metals, resins, etc. Stress concentration is improved, preventing thread ...
Bossard Co., Ltd.
300+ people viewing
Last viewed: 1 day ago
A bind machine screw is a machine screw with a trapezoidal head and a rounded top. It is characterized by a lower head than a p...
Bossard Co., Ltd.
300+ people viewing
Last viewed: 1 day ago
In addition to the conventional wire insert with a tang, we have also developed a tangless insert that eliminates the "tang" (a...
Bossard Co., Ltd.
280+ people viewing
Last viewed: 1 day ago
This is a hex bolt with a flange (skirt-like brim) all the way around the hem of the head. Also called flange hex bolt or flang...
Bossard Co., Ltd.
260+ people viewing
Last viewed: 9 hours ago
This is a hexagonal nut with one side of a general hexagonal nut closed with a dome-shaped head and the screw hole not passing ...
Bossard Co., Ltd.
210+ people viewing
Last viewed: 18 hours ago
A hexagon socket head bolt with a countersunk head, also known as a countersunk cap or countersunk cap bolt. In addition to ge...
Bossard Co., Ltd.
180+ people viewing
Last viewed: 23 hours ago
A blind nut that allows you to easily attach female threads to thin metal plates, resin materials, etc. that cannot be directly...
Bossard Co., Ltd.
160+ people viewing
Last viewed: 17 hours ago
A cross-recessed thin head screw with a 66-75% lower head height and up to 49% lighter weight. Lamix, which has a precision No....
2 models listed
Bossard Co., Ltd.
160+ people viewing
Last viewed: 1 day ago
Numerous products have been developed to cover a wide variety of architectural and woodworking needs, including civil engineeri...
2 models listed
Bossard Co., Ltd.
130+ people viewing
Bending can be performed for various purposes such as raw bending, baked bending, and high-precision springs. We can handle mas...
Bossard Co., Ltd.
130+ people viewing
Last viewed: 1 day ago
A strong thread solution for soft materials such as light metals and plastics. A threaded insert (also known as a threaded bush...
3 models listed
Bossard Co., Ltd.
120+ people viewing
Last viewed: 21 hours ago
Hand-tight screws are screws that can be tightened by hand without any tools. Also called a thumbscrew. You don't have to worry...
6 models listed
Bossard Co., Ltd.
120+ people viewing
Last viewed: 4 hours ago
The screw itself has a female thread formed on the mating material by plastic molding, so it can be tightened directly into a p...
4 models listed
Bossard Co., Ltd.
110+ people viewing
Last viewed: 1 hour ago
Self-clinching fasteners (press-fit fasteners) are press-fitted into a part with a prepared hole, which causes the part to plas...
6 models listed
Bossard Co., Ltd.
110+ people viewing
Last viewed: 8 hours ago
Pins, keys, and retaining rings are mainly used for positioning, retaining, and fixing, and are used in a wide variety of produ...
9 models listed
Bossard Co., Ltd.
110+ people viewing
Last viewed: 14 hours ago
Generally, a male threaded part used in combination with a nut is called a bolt. Hexagonal bolts with heads shaped like hexagon...
9 models listed
Bossard Co., Ltd.
100+ people viewing
Last viewed: 1 day ago
Generally referred to as a washer, it is inserted between the mating material and the nut when tightening a bolt to prevent it ...
10 models listed
Bossard Co., Ltd.
100+ people viewing
Last viewed: 10 hours ago
They have a cylindrical hole in various external shapes and are threaded on the inside, and are also called female threads. Use...
9 models listed
Bossard Co., Ltd.
100+ people viewing
Last viewed: 11 hours ago
In addition to the metric thread (JIS standard), which is widely used in Japan, there are many other standards around the world...
3 models listed
Country | Japan |
---|---|
Founded | 1988 |
Number of Employees | 40 |
Website | Bossard Co., Ltd. Website |