Digital quantitative pump DME
Grundfos Pumps Corporation
About This Product
In addition to simple operability, accurate injection is achieved with a wide range of flow range of 60 to 940 liters per hour.
・ The adoption of a stepper motor / EC drive optimizes stroke speed control and achieves extremely high accuracy.
The duration of each discharge stroke changes according to the flow setting.
Although the suction stroke time is always constant, it can be extended using the cavitation prevention function, so it can meet a wide range of needs.
In this way, inhalation is always performed in a full stroke.
This will smoothly pump the liquid that releases gas, and to provide continuous injection and less pulsating in injection systems that need to be installed in long -sucked lines.
-The DME pump series can be easier and more accurate than ever before as a small digital injection device.
・ Accuracy and simple settings
The amount of liquid required for each purpose is accurately discharged with only the installation of the pump and the simple settings. Not only look at the set value directly on the screen, but also check pulse and batch. The operation mode can be easily identified with an icon.
・ Turndown ratio 1: 800
Realizes adaptability and accuracy by the turndown ratio of 10 times the conventional device. Turn down the suction stroke to 75.50.25%of the maximum speed, achieving optimal priming and discharge even for liquids that are difficult to handle.
・ Independent technology
Injects with accurate and small pulsation with high viscosity and gasized liquids that are easy to gasize with proprietary technology. The speed of the motor during the discharge stroke is controlled by the conventional adjustment of the stroke length, the speed of the suction stroke has become unchanged, and the optimal and uniform mixed status is guaranteed.
・ Field bus communication
You can collect quality control, preventive maintenance, performance data and state data.
・ Overload protection function
The built -in overload protection function prevents pressure load over the pump back pressure to prevent overturned pressure.
・ You can select a variety of materials
Pump head materials can be selected from stainless steel, PVDF, and cost efficiency without affecting the environment.
-
Product
Digital quantitative pump DME
-
Handling Company
Grundfos Pumps Corporation
1 Models of Digital quantitative pump DME
| Product Image | Part Number | Price (excluding tax) | Adjustment Range | Adjustment range | Maximum CorResponging Viscosity (When Using Spring Valves) [MPA / S] (CP) | Maximum Flow Rate [ℓ/h] (mℓ/min) | Maximum Number of Strokes (SPM) | Maximum corresponding viscosity (when using spring valves) [MPA / S] (CP) | Maximum flow rate [ℓ/h] (Mℓ/min) | Maximum number of strokes (SPM) | Maximum pressure (MPA) | Maximum presure (MPA) | Maximum suction (M) when driving (M) | Maximum working (m) where driving (m) | Minimum Flow Rate [ℓ/h] (mℓ/min) | Minimum flow rate [ℓ/h] (mℓ/min) | Power Supply Voltage and Frequency (V), (Hz) | Power supply voltage and frequency (v), (Hz) | Repeated Accuracy (%) | Repeated accuracy (%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DME 375-10 |
Available upon quote | 13:32 | 13:32 | 3000 (When Driving at 50%of Maximum Discharge) | 376 (6267) | 160 | 3000 (when driving at 50%of maximum discharge) | 376 (6267) | 160 | 1 | 1 | 6 | 6 | 500 (8.33) | 500 (8.33) | Single Phase 100-240,50/60 | Single phase 100-240,50/60 | ± 1 | ± 1 |
Customers who viewed this product also viewed
Other products of Grundfos Pumps Corporation
View more products of Grundfos Pumps Corporation
About Company Handling This Product
- United States of America