Product
Laser control electronics DLC Pro for the most advanced technologyHandling Company
TOPTICA Photonics AGProduct Image | Part Number | Price (excluding tax) | Actual temperature reproducibility | Analog input (BNC) | Analog output (BNC) | Communication interface | Current noise density | Digital signal input | Display specification | Input range, impedance | Long -hour stability of laser drive current | Low frequency current noise (0.1Hz to 10Hz) | Maximum Peltier (TEC) voltage | Maximum laser drive current | Maximum laser drive voltage | Maximum perchae (TEC) current | Maximum piezo driving current (Charge / Decharge) | Minimum current setting step | Minimum temperature setting step | Modification band width (-3db, 45 °) | Operator interface | Output range, impedance | Piezo voltage range | Power stabilization band width | Simillary signal band width | Smallest piezo voltage step | Temperature coefficient of actual temperature | Temperature coefficient of laser drive current | Temperature coefficient of piezo voltage | Temperature noise (100 μHz to 1Hz) | Touch panel specification | Voltage noise density |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DLC Pro |
Available upon quote | <0.001k after> 1h warm-up |
2x (24bit, DC ~ 300kHz) 2x (16 / 10bits, DC ~ 300kHz / 1.7MHz) |
2x (16bits, DC ~ 300kHz) | Ethernet and USB |
Current control CC-500: 280pa / SQRT (Hz) @1kHz Current control CC-5000: 120NA / SQRT (Hz) |
4x TTL, 10kohm, Sub-HD 15-PIN | 7 inch, 800 x 480 pixels, 262k color LCD | -4V ~+4V, 10kohm |
Current control CC-500: <100ppm / SQRT (KHRS) After> 1h warm-up Current control CC-5000:- |
Current control CC-500: <50NAP-P Current control CC-5000: 10 μap-P |
3V@3A / 12V@3A |
Current control CC-500: 2x245MA or 1x490ma (Selectable) Current control CC-5000: 5000ma |
Current control CC-500: 7V@360ma, 5V@490ma Current control CC-5000: 3.5V |
3A | 25MA |
Current control CC-500: 0.015μA Current control CC-5000: 5 μA |
50μK |
Current control CC-500: BETWEEN 15kHz and 30kHz (Depending on Laser Diode) Current control CC-5000: 100Hz |
Touch display, 10 push buttons, 4 knob -switches, key switches | -4V ~+4V (No Load), 50OHM | -1V ~+140V |
Current control CC-500: DL PRO: 10kHz, CTL: 4kHz Current control CC-5000: Ta Pro: 4kHz, shg Pro: 1kHz |
3kHz (0 LOAD) | 0.01mv | <140ppmk / K After> 1h warm-up |
Current control CC-500: <3ppm / k typep.after> 1h warm-up Current control CC-5000:- |
<40ppm / k | <300μKP-P | Projected electrostatic capacity system (PCT), multi -touch control | 140NV / SQRT (Hz) @1kHz |