Module Design, Quantum Technology 2.0 optimized compact 19 "Laser Rack System MTA Pro Series
TOPTICA Photonics AG
About This Product
■ 19 -inch glow amplification wavelength variable lighting single frequency laser
・ Up to two TA Pro, Boosta Pro or DL/DFB Pro system can be installed
・ Maximum output at the PM fiber edge 2W and abundant wavelength lineup 369 to 1,770Nm
・ Equipped with automatic optical axis adjustment to amplifier chips and fiber binders
・ Low noise, low drift, narrow line width
・ Realize the best performance with digital controller DLC Pro
Up to two MTA TA Pro amplified laser systems are integrated into 19 -inch Sack and are seamlessly stored in 19 inch. The module design allows you to integrate the MTA BOOSTA PRO (amplifier) and the DL/DFB Pro laser module. The integration of the DL/DFB PRO laser module to the MTA Pro can avoid extra MDL Pro, and also adds additional functions and options that cannot be used by MDLPRO.
Clear the optical table and store the laser in a 19 -inch sablack. Integration to Laser Rack Systems T is best to focus on experiments without spending time adjusting the laser system.
If it operates on T-RACK, it will be the same specifications as the fiber output type TA Pro system. In addition, a push button type fully automatic optical optical alignment function "Autoalign" is always installed to each input portion of taper amplifier chips and fiber conjunction. Output stabilization is also supported.
Featuring the full extension pullout mechanism and dynamic cable management, access to laser modules is easy. At the same time, it also has a passive vibration anti -vibration function for decuping a laser from an external environment. Use a total of 4RU (Rack Unit), including the 1RU blanking front panel for blocking heat between laser units. Since the light output is a fiber output, it can be handled flexibly.
It is controlled by the DLC Pro, digital architecture provides low noise laser operation, intelligent lock function, and Ethernet remote control.
-
Product
Module Design, Quantum Technology 2.0 optimized compact 19 "Laser Rack System MTA Pro Series
-
Handling Company
TOPTICA Photonics AG
4 Models of Module Design, Quantum Technology 2.0 optimized compact 19 "Laser Rack System MTA Pro Series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Built -in module | Environmental temperature | Environmentally humidity | Fiber end output (MW) | Laser unit size | Line width (typical value, 5 µs) | Mode hop free variable band (GHz) | Various bandwidth (typical value) (NM) | Wavelength range (NM) | power consumption | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MTA TA Pro |
Available upon quote | Up to two MTA TA Pro (HP/DFB/DFB HP), MTA Boosta Pro (HP), MTA DL Pro (HP) or MTA DFB Pro can be installed. | 15-30 ° C (when operating), 0-40 ° C (for storage and transportation) | No condensation | Up to 2,000 | Height: 4RU (including blank panel 1-RU), width: 19 inches, depth: 722mm | 10 ~ 500kHz (DL Pro Master), 0.2 ~ 4MHz (DFB/DBR Master) | 20-50 | 10 ~ 50 | 660-1,540 | <200W | <30kg (MTA Pro L laser unit), <8.5kg (DLC Pro control unit)) |
|
|
MTA Boosta Pro |
Available upon quote | Up to two MTA TA Pro (HP/DFB/DFB HP), MTA Boosta Pro (HP), MTA DL Pro (HP) or MTA DFB Pro can be installed. | 15-30 ° C (when operating), 0-40 ° C (for storage and transportation) | No condensation | Up to 2,000 | Height: 4RU (including blank panel 1-RU), width: 19 inches, depth: 722mm | By seed laser | By seed laser | 10 ~ 50 | 660-1,540 | <200W | <30kg (MTA Pro L laser unit), <8.5kg (DLC Pro control unit)) |
|
|
MTA DL Pro (HP) |
Available upon quote | Up to two MTA TA Pro (HP/DFB/DFB HP), MTA Boosta Pro (HP), MTA DL Pro (HP) or MTA DFB Pro can be installed. | 15-30 ° C (when operating), 0-40 ° C (for storage and transportation) | No condensation | 6 to 220 | Height: 4RU (including blank panel 1-RU), width: 19 inches, depth: 722mm | 10 ~ 300kHz (DL Pro Master) | Typ. ≥20 | 10 ~ 50 | 369 ~ 1,770 | <200W | <30kg (MTA Pro L laser unit), <8.5kg (DLC Pro control unit)) |
|
|
MTA DFB Pro |
Available upon quote | Up to two MTA TA Pro (HP/DFB/DFB HP), MTA Boosta Pro (HP), MTA DL Pro (HP) or MTA DFB Pro can be installed. | 15-30 ° C (when operating), 0-40 ° C (for storage and transportation) | No condensation | 1 to 80 | Height: 4RU (including blank panel 1-RU), width: 19 inches, depth: 722mm | 200 ~ 4,000kHz | Up to 1,400 | 2 ~ 6 | 633 ~ 1,770 | <200W | <30kg (MTA Pro L laser unit), <8.5kg (DLC Pro control unit)) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of TOPTICA Photonics AG
View more products of TOPTICA Photonics AG
About Company Handling This Product
- Germany
- Since 1998
- 490 employees