Ultimate low concentration in seawater, Ideal for measuring chlorine measurements
IWAKI CO., LTD.
About This Product
■ Features
・ It is a non -reagent residual chlorine concentration meter dedicated to extreme low concentration measurement corresponding to a wide range of samples such as seawater.
・ The specially developed three -electrode pole residual chlorine sensor is ideal for measuring extremely low -concentration residual chlorine with less zero draft, smaller draft.
-The measuring part has a simple structure without a mechanical drive, and is equipped with a bead spinning cleaning mechanism that can be cleaned on a continuous cleaning of the sensor.
・ The maintenance frequency is reduced by adopting a large -volume measurement unit, which is difficult to clog even with dirty water inspection.
■ Ideal for maximal low -concentration residual remaining chlorine measurement
Because the zero draft is small, it is for low concentration of 0.1 mg/L or less.
■ Simple structure
Easy maintenance
■ Cleaning the sensor continuously
A beads -convergence sensor cleaning mechanism without a mechanical drive has been adopted.
■ Adopts a special structure sensor
A special structure sensor that is less likely to be affected by the coexistent substance during water inspection has been adopted.
■ Measurement can be performed without being affected by turbidity and coloring
Because of the electrochemical formula, measurements can be performed without being affected by the turbidity and coloring of sample water.
■ Operation key
Easy to handle in Japanese
■ Others
・ Measurement unit of large flow that is hard to clog even with dirty water
・ Very small interference of binding molded chlorine
・ Equipped with a self -diagnostic function
-
Product
Ultimate low concentration in seawater, Ideal for measuring chlorine measurements
-
Handling Company
IWAKI CO., LTD.
1 Models of Ultimate low concentration in seawater, Ideal for measuring chlorine measurements
| Product Image | Part Number | Price (excluding tax) | Contact capacity | Contact output | Effective measurement range | Installation method | Measurement ingredient | Measurement method | Measurement principle | Radius | Reproducibility | Transmission output | Water inspection PH range | display | power consumption | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ER-100A (ER-100L) |
Available upon quote | AC250V 1a Max. | Up, lower limit: 1A Hysteresis control output: 1A device abnormality: 1b | 0.000 ~ 0.500 mg/L (standard) | Mounting wall or 50A pipe installation | Play residual chlorine | Bead cleaning type microscope 3 electrode system | Polaralograph method | Same as seawater | Within ± 5%+1 digit of full scale (PH, temperature, constant power conduction) | DC4 ~ 20ma Insulated maximum load resistance 900Ω | PH5.8 ~ 8.2 | Digital 4 -digit LED display minimal resolution: 0.001 mg/L | Approximately 20VA | 1φac100 ~ 240V ± 10% 50/60Hz |
Customers who viewed this product also viewed
Other products of IWAKI CO., LTD.
View more products of IWAKI CO., LTD.
About Company Handling This Product
- Japan
- Since 1956
- 994 employees