Product
Emax Evolution Accessories AttachmentHandling Company
NAKANISHI INC.Items marked with have different values depending on the model number.
Click on the part number for more information about each product
Product Image | Part Number | Price (excluding tax) | Attachable tool shaft diameter | Maximum rotation speed used | Minimum processing hole diameter | Reduction ratio | Round -trip number (variable) | Standard attached collet | Standard equipment accessories | Stroke width | Tool Kamishiro | mass |
---|---|---|---|---|---|---|---|---|---|---|---|---|
IR-310 |
$ 191.40〜 | - | 40,000min-1 or less. | - | - | - | φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | Spana (7x5.1): 1 sheet, Pinspana (K-233): 1 sheet L-type spanner (9): 1 sheet | - | - | 92g | |
IH-300 |
$ 191.40〜 | - | 40,000min-1 or less | - | - | - | φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | Spana (7x5.1): 1 sheet Pin Pana (K-233): 1 L-shaped spanner (9): 1 sheet | - | - | 62g | |
HG-200 |
$ 191.40〜 | - | 30,000min-1 or less | - | - | - | φ6.0mm (CHG-6.0) | Spana (10x10): 1 piece stick wrench (K-212): 1 pins pan (K-233): 1 sheet | - | - | 210g | |
BMH-300 |
$ 191.40〜 | - | 35,000min-1 or less | - | - | - | φ3.0mm (CHM-3.0) | Spana (7x5.1) (6x4.5): 1 piece each pin pan (K-233): 1 sheet | - | - | 156g | |
MFC-300s |
$ 237.60〜 | - | 15,000min-1 or less. | φ20mm | 10/11 | - | φ1.6mm (K-252) | ・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | - | 11.9mm | 50g | |
MFC-300m |
$ 237.60〜 | - | 15,000min-1 or less. | φ13mm | 10/11 | - | φ1.6mm (K-253) | ・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | - | 7.2mm | 47g | |
IC-300 |
$ 237.60〜 | - | 30,000min-1 or less. | - | 3/4 deceleration due to built -in gear. | - | φ3.0mm (CHC-3.0) | ・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | - | - | 45g | |
KC-300 |
$ 237.60〜 | - | 30,000min-1 or less. | - | 3/4 deceleration due to built -in gear. | - | φ3.0mm (CHC-3.0) | ・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | - | - | 45g | |
ML-8 |
$ 336.60〜 | Up to φ3.5mm, screw tightening type | 25,000min-1 or less. | - | - | 0-6,380 times/minutes | - | ・ Allen wrench (1.5mm): 1 / Standard attached tool (below) | 0.8mm (fixed) | - | 130g | |
SLS-16 |
$ 382.80〜 | Up to φ5.0mm, screw tightening type | 30,000min-1 or less. | - | - | 0-7.650 times/minutes | - | ・ Spana (16x18), (20x24): 1 piece ・ Allen wrench (1.5mm): 1 piece, standard attached tool (below) | 0-1.6mm (variable) | - | 127g | |
LS-100 |
$ 547.80〜 | Up to φ6.4mm, screw tightening type | 25,000min-1 or less | - | - | 0-6,300 times/minutes | - | Allen wrench (2mm), (3mm): 1 lubricating oil raster each nozzle standard attached tool | 0-6mm (adjustment) | - | 680g |
Click on the part number for more information about each product