Price (excluding tax)
Estimate Required
Model Description
Lever type attachment
Code number
1005
・ Micron technology is combined to achieve high accuracy and high reliability.
・ Slim and lightweight for delicate finishing.
・ You can replace one -touch tools by lever chaucking.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Maximum rotation speed used
40,000min-1 or less. | IR-310
40,000min-1 or less
30,000min-1 or less | HG-200
35,000min-1 or less | BMH-300
15,000min-1 or less. | MFC-300s
15,000min-1 or less. | MFC-300m
30,000min-1 or less. | IC-300
30,000min-1 or less. | KC-300
25,000min-1 or less | LS-100
25,000min-1 or less. | ML-8
30,000min-1 or less. | SLS-16
Standard attached collet
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | IR-310
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35)
φ6.0mm (CHG-6.0) | HG-200
φ3.0mm (CHM-3.0) | BMH-300
φ1.6mm (K-252) | MFC-300s
φ1.6mm (K-253) | MFC-300m
φ3.0mm (CHC-3.0) | IC-300
φ3.0mm (CHC-3.0) | KC-300
Standard equipment accessories
Spana (7x5.1): 1 sheet, Pinspana (K-233): 1 sheet L-type spanner (9): 1 sheet | IR-310
Spana (7x5.1): 1 sheet Pin Pana (K-233): 1 L-shaped spanner (9): 1 sheet
Spana (10x10): 1 piece stick wrench (K-212): 1 pins pan (K-233): 1 sheet | HG-200
Spana (7x5.1) (6x4.5): 1 piece each pin pan (K-233): 1 sheet | BMH-300
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300s
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300m
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | IC-300
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | KC-300
Allen wrench (2mm), (3mm): 1 lubricating oil raster each nozzle standard attached tool | LS-100
・ Allen wrench (1.5mm): 1 / Standard attached tool (below) | ML-8
・ Spana (16x18), (20x24): 1 piece ・ Allen wrench (1.5mm): 1 piece, standard attached tool (below) | SLS-16
mass
92g | IR-310
62g
210g | HG-200
156g | BMH-300
50g | MFC-300s
47g | MFC-300m
45g | IC-300
45g | KC-300
680g | LS-100
130g | ML-8
127g | SLS-16
Minimum processing hole diameter
φ20mm | MFC-300s
φ13mm | MFC-300m
Reduction ratio
10/11 | MFC-300s
10/11 | MFC-300m
3/4 deceleration due to built -in gear. | IC-300
3/4 deceleration due to built -in gear. | KC-300
Tool Kamishiro
11.9mm | MFC-300s
7.2mm | MFC-300m
Attachable tool shaft diameter
Up to φ6.4mm, screw tightening type | LS-100
Up to φ3.5mm, screw tightening type | ML-8
Up to φ5.0mm, screw tightening type | SLS-16
Round -trip number (variable)
0-6,300 times/minutes | LS-100
0-6,380 times/minutes | ML-8
0-7.650 times/minutes | SLS-16
Stroke width
0-6mm (adjustment) | LS-100
0.8mm (fixed) | ML-8
0-1.6mm (variable) | SLS-16
See all 11 models in list