Price (excluding tax)
Estimate Required
Model Description
Angle (50 ゜)
Code number
1014
・ Ideal for flat speed polishing
・ For grinding and polishing using a tool with axis.
・ Various discs can be pasted on a dedicated rubber pad and can be processed on a flat surface and end face speed.
・ Realizes high accuracy, lightweight and high durability.
* When using air driving (Lotus), use a deceler.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Maximum rotation speed used
40,000min-1 or less. | IR-310
40,000min-1 or less | IH-300
30,000min-1 or less | HG-200
35,000min-1 or less | BMH-300
15,000min-1 or less. | MFC-300s
15,000min-1 or less. | MFC-300m
30,000min-1 or less. | IC-300
30,000min-1 or less.
25,000min-1 or less | LS-100
25,000min-1 or less. | ML-8
30,000min-1 or less. | SLS-16
Standard attached collet
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | IR-310
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | IH-300
φ6.0mm (CHG-6.0) | HG-200
φ3.0mm (CHM-3.0) | BMH-300
φ1.6mm (K-252) | MFC-300s
φ1.6mm (K-253) | MFC-300m
φ3.0mm (CHC-3.0) | IC-300
φ3.0mm (CHC-3.0)
Standard equipment accessories
Spana (7x5.1): 1 sheet, Pinspana (K-233): 1 sheet L-type spanner (9): 1 sheet | IR-310
Spana (7x5.1): 1 sheet Pin Pana (K-233): 1 L-shaped spanner (9): 1 sheet | IH-300
Spana (10x10): 1 piece stick wrench (K-212): 1 pins pan (K-233): 1 sheet | HG-200
Spana (7x5.1) (6x4.5): 1 piece each pin pan (K-233): 1 sheet | BMH-300
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300s
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300m
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | IC-300
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below)
Allen wrench (2mm), (3mm): 1 lubricating oil raster each nozzle standard attached tool | LS-100
・ Allen wrench (1.5mm): 1 / Standard attached tool (below) | ML-8
・ Spana (16x18), (20x24): 1 piece ・ Allen wrench (1.5mm): 1 piece, standard attached tool (below) | SLS-16
mass
92g | IR-310
62g | IH-300
210g | HG-200
156g | BMH-300
50g | MFC-300s
47g | MFC-300m
45g | IC-300
45g
680g | LS-100
130g | ML-8
127g | SLS-16
Minimum processing hole diameter
φ20mm | MFC-300s
φ13mm | MFC-300m
Reduction ratio
10/11 | MFC-300s
10/11 | MFC-300m
3/4 deceleration due to built -in gear. | IC-300
3/4 deceleration due to built -in gear.
Tool Kamishiro
11.9mm | MFC-300s
7.2mm | MFC-300m
Attachable tool shaft diameter
Up to φ6.4mm, screw tightening type | LS-100
Up to φ3.5mm, screw tightening type | ML-8
Up to φ5.0mm, screw tightening type | SLS-16
Round -trip number (variable)
0-6,300 times/minutes | LS-100
0-6,380 times/minutes | ML-8
0-7.650 times/minutes | SLS-16
Stroke width
0-6mm (adjustment) | LS-100
0.8mm (fixed) | ML-8
0-1.6mm (variable) | SLS-16
See all 11 models in list