Price (excluding tax)
Estimate Required
Model Description
Raster attachment
(Polisher)
Code number
1302
・ High power, large stroke achieves high efficiency processing.
・ Rubber grip is easy to hold and reduces vibration.
・ From various file work to wrapping mirror finish.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Maximum rotation speed used
40,000min-1 or less. | IR-310
40,000min-1 or less | IH-300
30,000min-1 or less | HG-200
35,000min-1 or less | BMH-300
15,000min-1 or less. | MFC-300s
15,000min-1 or less. | MFC-300m
30,000min-1 or less. | IC-300
30,000min-1 or less. | KC-300
25,000min-1 or less
25,000min-1 or less. | ML-8
30,000min-1 or less. | SLS-16
Standard attached collet
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | IR-310
φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | IH-300
φ6.0mm (CHG-6.0) | HG-200
φ3.0mm (CHM-3.0) | BMH-300
φ1.6mm (K-252) | MFC-300s
φ1.6mm (K-253) | MFC-300m
φ3.0mm (CHC-3.0) | IC-300
φ3.0mm (CHC-3.0) | KC-300
Standard equipment accessories
Spana (7x5.1): 1 sheet, Pinspana (K-233): 1 sheet L-type spanner (9): 1 sheet | IR-310
Spana (7x5.1): 1 sheet Pin Pana (K-233): 1 L-shaped spanner (9): 1 sheet | IH-300
Spana (10x10): 1 piece stick wrench (K-212): 1 pins pan (K-233): 1 sheet | HG-200
Spana (7x5.1) (6x4.5): 1 piece each pin pan (K-233): 1 sheet | BMH-300
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300s
・ Collet wrench (K-232): 1 sheet ・ Pinspana (K-233): 1 sheet | MFC-300m
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | IC-300
・ Exclusive Collet wrench (K-231): 1 sheet ・ Pinspana (K-233): 1 piece ・ Standard attached tool (below) | KC-300
Allen wrench (2mm), (3mm): 1 lubricating oil raster each nozzle standard attached tool
・ Allen wrench (1.5mm): 1 / Standard attached tool (below) | ML-8
・ Spana (16x18), (20x24): 1 piece ・ Allen wrench (1.5mm): 1 piece, standard attached tool (below) | SLS-16
mass
92g | IR-310
62g | IH-300
210g | HG-200
156g | BMH-300
50g | MFC-300s
47g | MFC-300m
45g | IC-300
45g | KC-300
680g
130g | ML-8
127g | SLS-16
Minimum processing hole diameter
φ20mm | MFC-300s
φ13mm | MFC-300m
Reduction ratio
10/11 | MFC-300s
10/11 | MFC-300m
3/4 deceleration due to built -in gear. | IC-300
3/4 deceleration due to built -in gear. | KC-300
Tool Kamishiro
11.9mm | MFC-300s
7.2mm | MFC-300m
Attachable tool shaft diameter
Up to φ6.4mm, screw tightening type
Up to φ3.5mm, screw tightening type | ML-8
Up to φ5.0mm, screw tightening type | SLS-16
Round -trip number (variable)
0-6,300 times/minutes
0-6,380 times/minutes | ML-8
0-7.650 times/minutes | SLS-16
Stroke width
0-6mm (adjustment)
0.8mm (fixed) | ML-8
0-1.6mm (variable) | SLS-16
See all 11 models in list