Fuso Industries Co., Ltd.'s Company Profile and Products

■Features -Each device is lightweight and easy to disassemble and assemble, making it easy to relocate and transport. - All con...

• Agricultural Materials

• Excavators

■Features - Ideal for narrow spaces in mountainous areas and urban areas. - Light alloy is used in each part to reduce weight. ...

• Agricultural Materials

• Excavators

■Equipped with a pressure-driven mechanical impact type high-power drill head - Due to the simple structure, disassembly and as...

• Agricultural Materials

• Excavators

A compact, high-power, low-noise soil contamination investigation excavator that combines a compact mini-chopel with excellent ...

• Agricultural Materials

• Excavators

■Features ・The fragile glass oiler has been replaced with a grease injection type. -Grease can now be supplied more directly, ...

• Pumps

• Pump Pistons

■Features Easy to replace the plunger It can be easily disassembled by loosening the lock nut and rotating the plunger. ■Impro...

• Pumps

• Pump Plungers

■Features ・Lightweight and compact on-vehicle plant that can be loaded horizontally. ・Excellent acid resistance. There is no ...

• Agitators

• Paddle Mixers

It is attached to the tip of the core tube and is mainly used for core boring.

Used to increase the gap between the hole wall and core tube in soft geological formations or clay layers to improve slime (chi...

This product is made to order. Connect to a boring rod and use for drilling grout holes, blast holes, etc. Various chip materi...

There are two types of use: single core tube and double core tube. Used for drilling from soft rock to super hard rock. ■World...

This is a made-to-order product. A bit used for drilling holes in clay layers, sandstone, soft rock, etc. It has cutting surfac...

A drilling bit with 3 blades. Just like the cross bit, a carbide tip is planted on the cutting edge of the tip. There is also a...

A steel tube that transmits rotation and thrust to the bit and supplies fluid to the cutting edge.

This is a boring rod with male and female joints friction welded to both ends of the φ40.5 pipe body.

A boring rod for standard penetration tests. Particularly suitable for shocks caused by blows from drive hammers.

Used to connect rods.

This is a joint used to connect items with different thread sizes, such as boring rods and bits. We also manufacture rod screws...

Connected directly above the core tube, it acts as a reamer during retraction, and is intended to prevent wear on the core tube...

Connect the bit, core tube, and core tube coupling with the core sampling device. Insert core shell complete between core tubes...

A fitting that connects the core tube and boring rod. We also manufacture rod screws other than 40.5.

A metal chip is planted on the shoulder of the core tube coupling, and while the core tube is being pulled up, the part where t...

A fitting for connecting two or more core tubes.

A device that connects between the core tube and metal crown to hold the core. It is assembled as a set of 3 items: core shell,...

A tube for collecting and storing slime, and is used by connecting to the sediment tube coupling at the top of the core tube. I...

A fitting that connects the core tube and sediment tube, and also connects the rod. The sediment tube and connection part are l...

A fitting that connects a sediment tube to a double core tube.

This coupling sends drilling water to the core tube during drilling, and when the boring rod is pulled up, the water in the rod...

Used to prevent samples from falling during sampling. (Used in combination with drop coupling) *Some products have a hardened ...

Used to prevent samples from falling during sampling. (Used in combination with drop bar)

S, NEWS, SLIM, triple, R, REX, drive type and others are available.

N, NSR, NS, NSG types and others are available.

A casing tube made of a material with high tensile strength.

A thick-walled carbon steel casing tube for pressure piping.

This is a casing tube made of carbon steel pipe (gas pipe) used for anchor work, drainage hole boring, etc.

A bit that connects to the tip of the casing tube to drill and install the casing tube in place. You can choose the inner and o...

A tip tool that makes it easier to drive the casing tube into the soil. The tip is internally tapered and hardened, and is used...

A fitting that connects the casing tube and boring rod. We also manufacture rod screws other than 40.5.

This is a sampler used for standard soil penetration tests. It consists of a shoe, a split barrel that can be split into two, a...

• Packing Materials

• Samplers

This is a double tube type with an inner liner installed inside the split barrel of the sampler used for standard penetration t...

• Packing Materials

• Samplers

A basket spring is attached to the tip shoe and is used in strata where materials tend to fall off, such as sand layers.

An instrument that is hit by a drive hammer used in standard penetration tests. Used by connecting with a boring rod. There are...

This is the tip of a dynamic penetration tester that is attached to the tip of a boring rod and is driven in by the impact of a...

A striking hammer for standard penetration tests, equipped with a semi-automatic dropping mechanism. At a standard drop height ...

Patented guide rod for drive hammer during standard penetration test. Available for semi-automatic dropping devices and standar...

Even if the connecting parts such as the guide rod or release coupling are damaged during the standard penetration test, the sa...

Used for standard penetration tests, driving of drive pipes, etc., and reverse driving work.

Standard penetration tests can be performed with the core tube held in place, preventing collapse of the hole wall. Additionall...

This is an instrument for collecting samples with little disturbance from soft clay soil or loose sand containing fine particle...

• Packing Materials

• Samplers

Used as a sampling tube for fixed piston type, water pressure type samplers, etc.

• Packing Materials

• Samplers

This is an inner rod that connects to the piston rod of a fixed piston sampler to secure the piston on the ground. (Φ16) ■Redu...

Used to hold the baby rod inside the boring rod.

Used when collecting samples from clayey soil with an N value of 0 to 8, and soft to medium ground.

• Packing Materials

• Samplers

Used when collecting clay with an N value of 4 or more or sandy soil with an N value of 10 or more. It can also be applied to l...

• Packing Materials

• Samplers

Attach it to the tip of the core tube and collect the sample by driving it in. In addition, the collected sample is covered wit...

• Packing Materials

• Samplers

Used when collecting clay soil with an N value of about 4 to 15. The sampling rate has been improved by providing a shoe at the...

• Packing Materials

• Samplers

This is a free rotation device that continuously feeds boring water into the rotating boring rod. This is a water swivel that a...

• Fittings

• Swivel Joints

This is a free rotation device that continuously feeds boring water into the rotating boring rod. ■Summary ・Different diamete...

• Fittings

• Swivel Joints

This is a free rotation device that continuously feeds boring water into the rotating boring rod. Ultra-lightweight water swive...

• Fittings

• Swivel Joints

This is a device that holds the casing tube when it goes up and down.

This is a device that holds the casing tube when it goes up and down. It is divided into a piece to hold and a frame to receive...

This is a device that holds the boring rod when raising and lowering it. (Made to order)

A device that holds the boring rod when it is raised or lowered. It has two eccentric pieces inside the frame, and the rod is h...

A lightweight rod holder that is lighter in weight than conventional holders. An (R) type with a right-hand handle is also ava...

Used for shallow boring. A simple manual rod lowering device.

Used when lifting and lowering the boring rod with a rope, etc.

Used for shallow boring. A simple lowering device that doubles as a rod holder.

This is a device that is screwed into the inside of the boring rod/pressure rod to collect residual residue in the hole. Not ap...

The tip is a rod coupling tap and the rear is a rod inside tap, making it a device that can be used in two ways.

This is a device that can be placed over the boring rod remaining in the hole to collect it when the distance between the outer...

This is a device that screws into the inside of the core tube that has fallen or remains in the hole to collect it.

This is a device used for lifting and lowering boring rods, casing tubes, etc. The fitting is designed to rotate freely, and th...

Suction hose (standard length 4m) ・Delivery hose (standard length 11m) Hose length can be changed.

• Hoses / Tubes

• Suction Hose

Attach to the end of the suction hose and use to prevent backflow of muddy water. This product comes with a hood valve nozzle.

Attach to the end of the suction/delivery hose and use to connect to the machine.

Used when fixing the hose nozzle to the hose.

• Clamps & Fasteners

• Hose Bands

Prevents the pump from sucking in slime, dirt, etc. This product is made of stainless steel.

A steel pipe screw removal tool for rods, core tubes, casings, etc.

• Tools

• Wrenches

A steel pipe screw removal tool for rods, core tubes, casings, etc.

• Tools

• Chain Wrenches

A tool for disassembling and assembling double core tubes. ■Free arm wrench ・Made of aluminum ・Made of iron ■Permanent wren...

• Tools

• Wrenches

This is a device for safely performing work on the roof. Used by attaching it to a pipe tripod. Baseboard is an optional item.

This is a pipe tripod head. No need to drill holes directly into the pipe.

A metal fitting for fixing delivery hoses, hoisting ropes, etc. to prevent them from getting wrapped around the boring rod. Use...