Fuso Industries Co., Ltd.

This is a device that screws into the inside of the core tube that has fallen or remains in the hole to collect it.

Attach to the end of the suction/delivery hose and use to connect to the machine.

An instrument that is hit by a drive hammer used in standard penetration tests. Used by connecting with a boring rod. There are...

This is a device that holds the boring rod when raising and lowering it. (Made to order)

This is the tip of a dynamic penetration tester that is attached to the tip of a boring rod and is driven in by the impact of a...

Connect the bit, core tube, and core tube coupling with the core sampling device. Insert core shell complete between core tubes...

A metal chip is planted on the shoulder of the core tube coupling, and while the core tube is being pulled up, the part where t...

The tip is a rod coupling tap and the rear is a rod inside tap, making it a device that can be used in two ways.

A striking hammer for standard penetration tests, equipped with a semi-automatic dropping mechanism. At a standard drop height ...

A bit that connects to the tip of the casing tube to drill and install the casing tube in place. You can choose the inner and o...

A tip tool that makes it easier to drive the casing tube into the soil. The tip is internally tapered and hardened, and is used...

Used when lifting and lowering the boring rod with a rope, etc.

A thick-walled carbon steel casing tube for pressure piping.

Used to hold the baby rod inside the boring rod.

Prevents the pump from sucking in slime, dirt, etc. This product is made of stainless steel.

Even if the connecting parts such as the guide rod or release coupling are damaged during the standard penetration test, the sa...

This is a casing tube made of carbon steel pipe (gas pipe) used for anchor work, drainage hole boring, etc.

Used for shallow boring. A simple lowering device that doubles as a rod holder.

A drilling bit with 3 blades. Just like the cross bit, a carbide tip is planted on the cutting edge of the tip. There is also a...

This is a made-to-order product. A bit used for drilling holes in clay layers, sandstone, soft rock, etc. It has cutting surfac...

Patented guide rod for drive hammer during standard penetration test. Available for semi-automatic dropping devices and standar...

A tube for collecting and storing slime, and is used by connecting to the sediment tube coupling at the top of the core tube. I...

Connected directly above the core tube, it acts as a reamer during retraction, and is intended to prevent wear on the core tube...