Fuso Industries Co., Ltd.

Used when collecting clay with an N value of 4 or more or sandy soil with an N value of 10 or more. It can also be applied to l...

Suction hose (standard length 4m) ・Delivery hose (standard length 11m) Hose length can be changed.

• Hoses / Tubes

• Suction Hose

A lightweight rod holder that is lighter in weight than conventional holders. An (R) type with a right-hand handle is also ava...

Attach it to the tip of the core tube and collect the sample by driving it in. In addition, the collected sample is covered wit...

Used when fixing the hose nozzle to the hose.

• Clamps & Fasteners

• Hose Bands

This product is made to order. Connect to a boring rod and use for drilling grout holes, blast holes, etc. Various chip materi...

Used to increase the gap between the hole wall and core tube in soft geological formations or clay layers to improve slime (chi...

A device that holds the boring rod when it is raised or lowered. It has two eccentric pieces inside the frame, and the rod is h...

A metal fitting for fixing delivery hoses, hoisting ropes, etc. to prevent them from getting wrapped around the boring rod. Use...

This is a device that is screwed into the inside of the boring rod/pressure rod to collect residual residue in the hole. Not ap...

A tool for disassembling and assembling double core tubes. ■Free arm wrench ・Made of aluminum ・Made of iron ■Permanent wren...

• Tools

• Wrenches

A device that connects between the core tube and metal crown to hold the core. It is assembled as a set of 3 items: core shell,...

Used for shallow boring. A simple lowering device that doubles as a rod holder.

A fitting that connects the casing tube and boring rod. We also manufacture rod screws other than 40.5.

Connect the bit, core tube, and core tube coupling with the core sampling device. Insert core shell complete between core tubes...

This is a pipe tripod head. No need to drill holes directly into the pipe.

A bit that connects to the tip of the casing tube to drill and install the casing tube in place. You can choose the inner and o...

A striking hammer for standard penetration tests, equipped with a semi-automatic dropping mechanism. At a standard drop height ...

This is a device used for lifting and lowering boring rods, casing tubes, etc. The fitting is designed to rotate freely, and th...

There are two types of use: single core tube and double core tube. Used for drilling from soft rock to super hard rock. ■World...

This coupling sends drilling water to the core tube during drilling, and when the boring rod is pulled up, the water in the rod...

Used to prevent samples from falling during sampling. (Used in combination with drop bar)

This is a device that can be placed over the boring rod remaining in the hole to collect it when the distance between the outer...

An instrument that is hit by a drive hammer used in standard penetration tests. Used by connecting with a boring rod. There are...

A basket spring is attached to the tip shoe and is used in strata where materials tend to fall off, such as sand layers.

A metal chip is planted on the shoulder of the core tube coupling, and while the core tube is being pulled up, the part where t...

A thick-walled carbon steel casing tube for pressure piping.

This is a casing tube made of carbon steel pipe (gas pipe) used for anchor work, drainage hole boring, etc.

Used when lifting and lowering the boring rod with a rope, etc.

This is a device that holds the casing tube when it goes up and down.