NISSAN TANAKA CORPORATION's Company Profile and Products
Overview
Profile
| Country | Japan |
|---|---|
| Address | 11 Chikumazawa, Miyoshi-machi, Iruma-gun, Saitama, Japan |
| Company Type | Manufacturer , Distributor |
| Website | NISSAN TANAKA CORPORATION Website |
Products Handled By NISSAN TANAKA CORPORATION
413 registered products of NISSAN TANAKA CORPORATION
Filter
Filter products
NISSAN TANAKA CORPORATION
Low-pressure blowpipe with a structure that reduces flashback Medium-sized cutter Z Novak / No. A cutter Z Novak
■Features - Adopts a structure that reduces backfire, reducing accidents caused by backfire. ・A medium-sized cutter U45II Nova...
NISSAN TANAKA CORPORATION
A wide range of cutting options from thin plates to thick plates Small cutter K/B cutter Z/C cutter S
■Features ・We have a wide range of cutting ranges from small cutters to C type cutter S. ・Novac function is not adopted for t...
NISSAN TANAKA CORPORATION
Safe and powerful medium-pressure blowpipe that uses a tinder mixing method HC-391Z cutter/HC-338S cutter
■Features ・Adopts a tinder mixing method to reduce accidents caused by backfire. ・It can be used with a general three-stage t...
NISSAN TANAKA CORPORATION
Gouging blowpipe Z for machining widths of 5 to 17 mm and depths of 3 to 12 mm (approximate groove dimensions)
■Gouging (grooving) A trench digging method in which the required areas are heated with a preheated flame of oxygen and acetyle...
NISSAN TANAKA CORPORATION
Mighty-C65 scarfing blowpipe
Scarf dimensions: For processing groove width 23~40mm and groove depth 1~2mm. *Main use is for deburring sprues, etc. ■Scarfin...
NISSAN TANAKA CORPORATION
Mighty 1000E scarfing blowpipe
For machining width 80~110mm and depth 2~3mm (shallow machining) and 4~5mm (deep machining). *Main use is for removing scratche...
NISSAN TANAKA CORPORATION
Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for welding around 10mm from thin plates
■Features - Lightweight and easy-to-use welded blowpipe. ・You can select your favorite type of small welder from NZ and MZ (gr...
NISSAN TANAKA CORPORATION
Blowpipe mixed type (French style/Kansai style) No. 1 welder/No. 2 welder (Blowpipe mixed type) ideal for welding from 5mm to 45mm
■Features - Lightweight and easy-to-use welded blowpipe. *The blowpipe does not come with a tinder.
NISSAN TANAKA CORPORATION
Crater mixing type (German style) No. A welder S/B welder S/No. 3 welder S (crater combination type) ideal for welding and heating from thin plates to 50 mm
■Features -Since it is mixed at the tinder, any fuel gas can be used by replacing only the tinder. ・Only the tip of the crater...
NISSAN TANAKA CORPORATION
Blowpipe mixed type (French style/Kansai style) No. 00 welder/Small welder/Medium size welder (Blowpipe mixed type) ideal for heating around 10mm from thin plate
■Features - Lightweight and easy-to-use welded blowpipe. ・We offer a wide range of products to suit different applications. ・...
NISSAN TANAKA CORPORATION
High power series for linear heating. High power ZS linear heater
Plate thickness: Ideal for heating from 12mm to 50mm ■Features ・Lightweight and easy to grip ・The heating flame (white dot) ...
NISSAN TANAKA CORPORATION
High power series for linear heating. High power MOXA S
Plate thickness: Suitable for heating plate thickness: 5.0mm to 50mm ■Features ・Lightweight and easy to grip ・The heating fl...
NISSAN TANAKA CORPORATION
A dedicated LPG heating device ideal for heating steel plates, bending plates, removing distortion, brazing, etc. Compact LPG heater (centralized type)
Plate thickness: Ideal for heating ultra-thin to 9.0mm ■Features A heated blowpipe for brazing for seated work and fixing. ■O...
NISSAN TANAKA CORPORATION
A specialized LPG heating device ideal for heating steel plates, bending plates, removing distortion, brazing, etc. Medium-sized LPG heater (centralized type)
Plate thickness: Ideal for heating ultra-thin to 20mm ■Features - General heating blowpipe used for sitting work, brazing for ...
NISSAN TANAKA CORPORATION
HW-50LPG heater (diffusion type), ideal for heating steel plates, bending plates, removing distortion, brazing, etc.
Plate thickness: Ideal for heating ultra-thin to 20mm ■Features ・With a total length of 1,064 mm, it is often used for heatin...
NISSAN TANAKA CORPORATION
Standard regulator for fuser with master VI guard OG/OF/A
■Features - Equipped with a guard to protect the pressure gauge from unexpected shocks for safety during field work. -Equipped ...
NISSAN TANAKA CORPORATION
Quick Ace with Master VI Guard OG/OF/A, a standard dry safety device with one-touch installation type
■Features ・Equipped with a highly reliable, small-sized, one-touch installation type dry safety device stop quick. - Equipped ...
NISSAN TANAKA CORPORATION
Ideal for hydrogen gas supply Master VI HC 832HC
■Features ・Compatible with Taiyo Nippon Sanso Sun Cutter HL-1 and other hydrogen-based premix gases ・Equipped with a guard to...
NISSAN TANAKA CORPORATION
Standard LP gas regulator for fusers Master VI LP 832WD
■Features ・Special design makes it ideal for stable supply of LPG ・If a valve is required at the outlet, a 6N valve is availa...
NISSAN TANAKA CORPORATION
Oxygen pressure regulator for lance rod NT50-LA NT50B-ST-B5G16G-B137-11000
Customers using lance sticks. Have you ever had a problem with the lance rod not being able to achieve its cutting performance ...
NISSAN TANAKA CORPORATION
Masterline VI series, ideal for gas headers and extraction from factory piping
■Features ・Can be widely used in various gas supply equipment and devices ・The open/closed status of the valve body can be se...
NISSAN TANAKA CORPORATION
More flexible layout possible Masterline VI M series/B series
■Features ・Masterline VI M series allows for flexible piping design by changing the position of the outlet joint and pressure ...
NISSAN TANAKA CORPORATION
Can be used in a wide range of applications from container pressure to reduced pressure JET-S Ⅱ
■Features - Due to the generous size of the main body, the usable flow rate range is wide and can be used stably even at high f...
NISSAN TANAKA CORPORATION
Two-stage pressure reduction type JETV series where supply pressure is not affected by inlet pressure changes
■Features ・The two-stage pressure reduction structure allows outlet pressure to be maintained with high precision without bein...
NISSAN TANAKA CORPORATION
Safety equipment New Stop Ace
■Features - Robust, lightest and ultra-compact size ・“Completely sealed type” that can be installed outdoors or indoors (facto...
NISSAN TANAKA CORPORATION
Safety device Reset Queen/Reset Ace II
■Features - Extremely simple and easy handling such as installation and reset ・Completely equipped with three major mechanisms...
NISSAN TANAKA CORPORATION
Safety device Stop King 5 Plus
■Features ・Completely equipped with three major mechanisms: "backfire prevention", "backflow prevention", and "blocking" ・Equ...
NISSAN TANAKA CORPORATION
Safety Device Stop King
■Lock valve reset method Reset cover slide (signal display: normal → green, backfire → red)
NISSAN TANAKA CORPORATION
Medium pressure water seal safety device
■Applicable gas Acetylene, propane
NISSAN TANAKA CORPORATION
Blowpipe accessories
■Features ・It is an accessory that will make using the gas cutter even safer and more convenient if you prepare it. ・Easy sup...
NISSAN TANAKA CORPORATION
N cock series (fluid coupling with automatic opening/closing valve)
■Features ・One-touch connection, slim and lightweight - When separated, the fluid is completely shut off by the valve function...
NISSAN TANAKA CORPORATION
N cock twin hose set (small diameter)
■Features ・One-touch connection, lightweight and easy to operate. - A spring is used on the connection side of the regulator t...
NISSAN TANAKA CORPORATION
OstyII MH6-10 allows for easy installation of caulked hoses for fusing and welding.
■Features ・It is possible to caulk the rubber hose used for fusing and welding at less than 1MPa. ・A safe working environment...
NISSAN TANAKA CORPORATION
Tinder lighter NL-101 that can steadily ignite gas cutters, welders, and heaters
■Features -Improved the flint gear to improve spark dispersion. Allows for smooth ignition during cutting work. - Improved crat...
NISSAN TANAKA CORPORATION
Leather gloves specialized for gas cutting and gas welding work Tanaka style fusing leather gloves FN-1107
■Features - When handling cutting and welding blowpipe, durability is improved by applying padding to the thumb and index finge...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine Straight line cutting machine KT-5NX
■Product features ・Standard machine for straight cutting ・Speed can be adjusted steplessly using the handle ・The wheels ar...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine free cutting KT-160NII
■Product features ・Multi-type that can not only cut straight lines but also cut free curves and arcs (Ø100 to 1,000 mm) ・Exce...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine Straight line cutting machine KT-8XB
■Product features ・More robust than KT-5NX and ideal for harsh work environments ・Thick plate cutting specifications and powd...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine small circle cutting KT-30-6
■Product features - Portable and compact small circle cutting machine ・Both drilling and cutting out discs are possible. ・Use...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine profile cutting KT-74M/KT-74L
■Product features ・Ideal for cutting shapes of flat steel as well as punching holes in shaped steel and longitudinal materials...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine profile cutting KT-350NII
■Product features ・Shape cutting is possible by copying the mold with a magnetic roller. - Copying is possible if the mold pla...
NISSAN TANAKA CORPORATION
Automatic gas cutting machine pipe cutting KT-45
■Product features ・Can cut pipes of any diameter from Ø150 to Ø600 (Ø600 or more can be cut by adding a chain) ・The machine c...
NISSAN TANAKA CORPORATION
Cutting guide PACER KT-270
■Product features ・A cutting guide that allows you to use your own cutter as is. ・ A constant speed can be obtained even by h...
NISSAN TANAKA CORPORATION
Welding trolley KT-8WB
■Product features ・Large and robust self-driving trolley ・This is a welded trolley that is based on the KT-8XB trolley and is...
NISSAN TANAKA CORPORATION
Labor-saving and resource-saving equipment High Trigger
■Product features ・Once you have adjusted the flame to the optimum condition, you can easily open the fuel, preheating oxygen,...
NISSAN TANAKA CORPORATION
Crater Series Manual Cutting Crater
Various types of craters related to gas cutting, welding, and heating
NISSAN TANAKA CORPORATION
Crater Series Gouging Crater
Various types of craters related to gas cutting, welding, and heating
NISSAN TANAKA CORPORATION
Crater Series Heating Crater
Various types of craters related to gas cutting, welding, and heating
NISSAN TANAKA CORPORATION
Crater Series Welding Heating Crater
Various types of craters related to gas cutting, welding, and heating
NISSAN TANAKA CORPORATION
Long-life, medium-pressure, three-stage crater Spatter adhesion reduction treatment
■Features ・By changing the material of the internal crater, the increase in surface roughness due to heating is suppressed and...
NISSAN TANAKA CORPORATION
For high pressure/container direct connection type COMET (CMH series)
■Features ・A high-performance model that uses a stainless steel diaphragm. ・Screw holes for panel mounting are standard equip...
NISSAN TANAKA CORPORATION
For low pressure/piping/pipe connection type COMET (CML series)
■Features - Highly functional model that uses a stainless steel diaphragm. -The pressure adjustment handle is equipped with a p...
NISSAN TANAKA CORPORATION
Widely compatible with various gas supply equipment and devices NT50B/NT50S
■Features - Adopts a SUS pressure gauge cover to prevent rust from forming on the pressure gauge. - Built-in filter reduces int...
NISSAN TANAKA CORPORATION
Pressure regulator for medium flow rate NT100B/NT100S
■Features ・This regulator is ideal for gas collection equipment and supply equipment. ・A SUS pressure gauge cover is used to ...
NISSAN TANAKA CORPORATION
Standard high flow regulator Wing H200/Wing L200
■Features ・Can be widely used in various gas supply equipment and devices including gathering equipment. - Compensation type s...
NISSAN TANAKA CORPORATION
Aurora 3 has little pressure fluctuation and is ideal for collection equipment and various gas supply equipment and equipment.
■Features ・Please use when the flow capacity is insufficient for Wing L-200. ・Can be widely used in various gas supply equipm...
NISSAN TANAKA CORPORATION
Ideal for situations where high pressure is required for various high pressure gas tests, experiments, etc. JET-Hc
■Features ・Possible to adjust pressure up to 20MPa. ・Uses a piston mechanism (*) to achieve high safety. - Built-in filter re...
NISSAN TANAKA CORPORATION
S-LABOII LAB1 series
■Features Ideal for use with standard gas, zero gas, and high purity gas. A stainless steel diaphragm is used to reduce externa...
NISSAN TANAKA CORPORATION
S-LABOII LABL series
■Features Ideal for use with standard gas, zero gas, and high purity gas. A stainless steel diaphragm is used to reduce externa...
NISSAN TANAKA CORPORATION
Antibacterial and antiviral handle adjuster Super LABO S series
■Features ・The handle is treated with antibacterial and antiviral treatment, not only for performance but also for hygiene. ・...
NISSAN TANAKA CORPORATION
Analytical pressure regulator S-LABOII LAB2 series
■Features - Ideal for use with standard gas, zero gas, and high purity gas. A stainless steel diaphragm is used to reduce exter...
NISSAN TANAKA CORPORATION
For high pressure/Monel S-LABO M1 series
■Features ・Monel is used for the main body material in order to handle particularly corrosive gases. - Adopts SUS316L metal di...
NISSAN TANAKA CORPORATION
For low pressure/Monel S-LABO ML series
■Features ・Monel is used for the main body material in order to handle particularly corrosive gases. - Adopts SUS316L metal di...
NISSAN TANAKA CORPORATION
Brass/Stainless steel S/LABO 0 series
■Features ・Small and lightweight, ideal for incorporating into various devices ・Small internal volume approximately 3ml ・Use...
NISSAN TANAKA CORPORATION
SUS S-LABO 0MC series
■Features ・Much smaller than the conventional S-LABO regulator and can be connected to a cylinder (inner volume approximately ...
NISSAN TANAKA CORPORATION
Compact pressure regulator ATR for atmospheric observation, environmental measurement, and high purity gas
■Main uses ・Atmospheric observation, environmental measurement ・Supply of high purity gas ・Other field and various experimen...
NISSAN TANAKA CORPORATION
Semi-automatic switching device Prince Changer
■Features - Automatically switches the left and right gas supply lines, allowing continuous gas supply for long periods of time...
NISSAN TANAKA CORPORATION
Low pressure/high flow type Prince changer PC250B-LP-M/PC250B-LP-P
■Features ・Achieves outstanding flow rate performance (250L/min) compared to conventional models. - Two models are available: ...
NISSAN TANAKA CORPORATION
Medium pressure (0.7MPa) Supply type Prince changer PC150B-MP-M/PC150B-MP-P
■Features ・Even though it is possible to supply at a pressure of 0.5 MPa or higher (maximum 0.7 MPa), if the intermediate pres...
NISSAN TANAKA CORPORATION
Low pressure type stainless steel changer SC-930SSA
■Features ・Semi-automatic switching device based on the highly reliable and proven "S-LABO adjuster". - Adopts a stainless ste...
NISSAN TANAKA CORPORATION
Medium pressure (0.7MPa) supply type stainless steel changer SC-930SSY
■Features ・Even though it is possible to supply at a pressure of 0.5 MPa or higher (maximum 0.7 MPa), if the intermediate pres...
NISSAN TANAKA CORPORATION
Medium pressure (0.7MPa) Supply type Prince changer PC150S-MP-M/PC150S-MP-P
■Features ・The long-awaited stainless steel specification is now available for medium-pressure semi-automatic switching, which...
NISSAN TANAKA CORPORATION
Semiconductor pressure regulator Low pressure small model S-TORRV02 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Standard model for primary side low pressure S-TORRV30 / 30SH series
85L/min (nor () P1=0.7MPa, P2=0.6MPa, N2 GAS) ■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity g...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Medium flow model for low pressure on the primary side S-TORRV50 / 50SH series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Standard model for high pressure on the primary side S-TORRV1300 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Medium flow model for high pressure on the primary side S-TORRV2300 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Corrosive gas model S-TORRV2300SH / 2300AH series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Semiconductor pressure regulator Negative pressure control, low vapor pressure model S-TORRVA10 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Tide diaphragm type model for liquefied gas S-TORRVT50 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors: Two-stage pressure reducing model exclusively for diborane S-TORRV1900 series
■Features ・The S-TORR regulator is a pressure regulator for ultra-high purity gases developed based on the TORR regulator, whi...
NISSAN TANAKA CORPORATION
Pressure regulator for semiconductors Standard model for primary side low pressure TORR-30 series
■Features ・The TORR series is a pressure regulator that can be said to be synonymous with pressure regulators for semiconducto...
NISSAN TANAKA CORPORATION
Pressure regulator for argon (vessel direct connection type) V-F22AR / V-F22ARL
■Features ・Ideal for depressurizing and supplying argon and its mixed gas used as shielding gas for welding. ・It is a type th...
NISSAN TANAKA CORPORATION
Pressure regulator for carbon dioxide gas/MAG gas (two-stage pressure reduction type, direct connection type to container) AU-888
■Features ・The two-stage pressure reduction structure and efficient heat exchange method solves the unstable flow rate phenome...
NISSAN TANAKA CORPORATION
Pressure regulator Capable of continuous and stable supply of flow rate 25L/min AU25B-H12 Ⅱ
■Features ・All CO2, MAG, and Ar gases commonly used for welding can be used. ・Equipped with a heater in the optimal position ...
Products
1 NISSAN TANAKA CORPORATION's product is listed.