CHAMPION CORPORATION Co., Ltd.

One-cycle motors are primarily developed for the rotational positioning of screws and screw caps in plastic molds that use scre...

• Motors

• Induction Motors

■New coating that is resistant to erosion and welding This is a new coating "MARC-D" whose effectiveness has been proven in ero...

• Processing Services

• Casting Dies

This is a φ50 guide pin. Induction hardening.

• Machining / Machine Tools

• Core Pins

This is a long runner lock pin. Short delivery times are possible due to additional machining of standard products.

• Machining / Machine Tools

• Angular Pins

TD-VC processing. There is a Φ4 water hole of about 200mm.

• Machining / Machine Tools

• Core Pins

This is a core pin made by Becu.

• Machining / Machine Tools

• Core Pins

It is a sprue sleeve of φ200. The SS400 ring is shrink-fitted and welded to the nitrided SKD61 body.

• Fixtures

• Sprue Bush

Since the coating is done by the customer, we took the coating thickness into consideration when manufacturing.

• Fixtures

• Slide Core Units

This is a φ75 guide bush. The inner diameter part is induction hardened.

• Fixtures

• Sprue Bush

This is a part for positioning verification jig.

• Fastening Components

• Brackets

Slanted pin with oil groove.

• Machining / Machine Tools

• Angular Pins

A needle pin with a tip diameter of φ0.28.

• Machining / Machine Tools

• Core Pins

This is a matching part with the sprue sleeve.

• Fixtures

• Slide Core Units

This is a product adapted for civilian use based on technology developed by the Japan Aerospace Exploration Agency (JAXA). Mist...

• Nozzles

• Misting Nozzles

It is a SUS316 shaft.

• Drive Mechanisms & Components

• Rotating Shafts

A pin used for positioning. Electroless nickel plating specification.

• Fixtures

• Guide Pins

A long stepped center pin.

• Machining / Machine Tools

• Core Pins

This is a production example of the new coating MARC-D plus. The cooling hole of Φ3 is 110mm.

• Fixtures

• Slide Core Units

This is a custom-made guide post for press molds.

• Fixtures

• Slide Core Units

This is a φ80 ejector guide bush. Induction hardening.

• Fixtures

• Sprue Bush

I made several items in different shapes.

• Processing Services

• Stamping Dies

We made a jig for the device.

• Fastening Components

• Brackets

This is a pin with a tip diameter of φ0.51.

• Machining / Machine Tools

• Core Pins

This is additional work on standard products.

• Machining / Machine Tools

• Angular Pins

• Fixtures

• Slide Core Units

This is a part that serves as a guide for the product. The tip is lapped between 10mm.

• Fixtures

• Level Sets

This is a custom-made guide post for press molds.

• Fixtures

• Die Sets

A long stepped sleeve. There are three holes in the hole, the inner diameter of the tip is φ4.2, H7 tolerance is 30mm, the tip ...

• Machining / Machine Tools

• Angular Pins