Measurement range sensor area setting type UST-05LN/LA
Hokuyo Electric
About This Product
It is a laser scanner that detects an object with a free area setting in the range of 5m and 270 °. (Lidar)
Small, lightweight, AGV (uninhabited transport vehicle) obstacle detection, robot, mechanical detection applications can improve factories and logistics efficiency, improvement of occupancy rates, and are ideal for replacing light curtains and matte switches.
Detects an object in a small and lightweight, wide range set freely.
・ Detection area settings can be easily set with dedicated applications.
・ It is adopted by entering around the machine, detection of existence, height of cargo, outbreak detection, and detection of pre -obstacles in AGV.
Since it detects a wide area, there is no detection compared to pinpoint detection.
Note) 541 Step detection area 270 °, step angle 0.5 °
Compact with W50 x D50 x H70mm
・ 130g lightweight and can be installed everywhere.
Three independent areas can be set, so you can monitor three places, alerts and stops according to the approaching stages. Up to 31 patterns can be switched.
You can easily set the area and various settings with intuitive operation dedicated application software.
Since the light -receiving waveform of the detected object is monitored, it is possible to set it according to the surrounding environment and application.
By switching the input, you can switch the area of up to 31 patterns, and you can switch the area according to the route with AGV (unmanned transportation vehicle).
Equipped with a dye function that prevents mutual interference by synchronous wiring, and a delay function to prevent interference and instantaneous malfunction.
It is equipped with a light -emitting intermittent function that reduces the impact on other devices.
You can detect obstacles in the direction of AGV (unmanned transportation) and avoid contact and collision.
It detects the presence and remaining people of robots and equipment machinery, and is an optical non -contact sensor, so you can set flexible areas and do not require regular replacement.
Ideal for replacing mat switches.
Detects invasion into the dangerous area. There is no need for difficult optical axis adjustment because it is an integrated one -of -pitched light.
Complex area settings that match the work are also possible, perfect for replacing light curtains.
-
Product
Measurement range sensor area setting type UST-05LN/LA
-
Handling Company
Hokuyo Electric
2 Models of Measurement range sensor area setting type UST-05LN/LA
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Angle Decomposition Ability | Angle decomposition ability | Current Consumption Current | Current consumption current | Division and Detector | Division and detector | Hysterical | Impact Resistance | Impact resistance | Indicator light | Light Source | Peripheral term | Power-Supply Voltage | Power-supply voltage | Protective Structure | Protective structure | Repetition | Response Time | Response time | START-UP TIME | Scanning Angle | Scanning angle | Start-up time | Synchronous function | Time of Scanning | Time of scanning | USed Peripheral Temperature Humidity | Used peripheral temperature humidity | Vibration Resistance | Vibration resistance | input | interface | kinds | light source | mass | output |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
UST-05LN |
Available upon quote | 0.5 DEGREES | 0.5 degrees | 150ma or More, However, a Rush Current is Required at about 400ma. | 150mA or more, however, a rush current is required at about 400mA. | 60mm to 5000mm60mm ~ 2000mm minimum Detector 130mm | 60mm to 5000mm60mm ~ 2000mm minimum detector 130mm | HYSTERESIS 6.25%HYSTERESIS 3.125%NO HYSTERESIS | 196 M/S2X. Y. Z Direction 10 Times Each | 196 M/S2X. Y. Z direction 10 times each | Power Supply Lantern: Lighting, Output Output 1 Indicator at Startup, and Failure: LightPut in The Area Detection 2 L IGHTING OUTPUT IN THE AREA Detection 3 Display Lights: Lights in the Area. | SEMICONDUCTOR LASER LASER SAFETY CLASS 1 | 80,000LX or less) note) If you receive strong as Such as sunlight Directly, you may be erroneous. | Power Supply Voltage DC12V/DC24V | Power supply voltage DC12V/DC24V | IP65 | IP65 | σ <20mm | OFF: 66msec ~ 3241msecon: 66msec ~ 3241msec | OFF: 66msec ~ 3241msecon: 66msec ~ 3241msec | Within 10sec | 270 DEGREES | 270 degrees | Within 10sec | Synchronous Operation Mode Synchronous Slave Synchronous Slave Synchronous Slave Synchronous Slave | 25msec | 25msec | -10 ℃ ~+50 ℃ 85%RH or Less | -10 ℃ ~+50 ℃ 85%RH or less | 10-55HZ DOUBLE WIDTH 1.5 m Mx. Y. Z Direction 2 HOURS 55-20HZ98 M/S2 Super 2 Minutes X. 1 Hour Each | 10-55Hz double width 1.5 m mx. Y. Z direction 2 hours 55-20HZ98 M/S2 Super 2 minutes X. Y. 1 hour each | Input 6 Points Input 1-5: Input Area Switching Synchronous Input: Synchronous Signal Input of Slave Machine | USBRS422 | Detection Area Setting Type | Semiconductor laser laser safety class 1 | 130g | Output 5 -Point Output 1: Output Off Output 2: Output Off Output By Detection In The Area 3: Output Off Off Off 4: Failure Output Output 4: Failur e output output 5: if the output of sync output is output, it will indicate 1 to 3 ObstacleS. |
|
|
UST-05LA |
Available upon quote | 0.5 DEGREES | 0.5 degrees | 150ma or More, However, a Rush Current is Required at about 400ma. | 150mA or more, however, a rush current is required at about 400mA. | 60mm to 5000mm60mm ~ 2000mm minimum Detector 130mm | 60mm to 5000mm60mm ~ 2000mm minimum detector 130mm | HYSTERESIS 6.25%HYSTERESIS 3.125%NO HYSTERESIS | 196 M/S2X. Y. Z Direction 10 Times Each | 196 M/S2X. Y. Z direction 10 times each | Power Supply Lantern: Lighting, Output Output 1 Indicator at Startup, and Failure: LightPut in The Area Detection 2 L IGHTING OUTPUT IN THE AREA Detection 3 Display Lights: Lights in the Area. | SEMICONDUCTOR LASER LASER SAFETY CLASS 1 | 80,000LX or less) note) If you receive strong as Such as sunlight Directly, you may be erroneous. | Power Supply Voltage DC12V/DC24V | Power supply voltage DC12V/DC24V | IP65 | IP65 | σ <20mm | OFF: 66msec ~ 3241msecon: 66msec ~ 3241msec | OFF: 66msec ~ 3241msecon: 66msec ~ 3241msec | Within 10sec | 270 DEGREES | 270 degrees | Within 10sec | Synchronous Operation Mode Synchronous Slave Synchronous Slave Synchronous Slave Synchronous Slave | 25msec | 25msec | -10 ℃ ~+50 ℃ 85%RH or Less | -10 ℃ ~+50 ℃ 85%RH or less | 10-55HZ DOUBLE WIDTH 1.5 m Mx. Y. Z Direction 2 HOURS 55-20HZ98 M/S2 Super 2 Minutes X. 1 Hour Each | 10-55Hz double width 1.5 m mx. Y. Z direction 2 hours 55-20HZ98 M/S2 Super 2 minutes X. Y. 1 hour each | Input 6 Points Input 1-5: Input Area Switching Synchronous Input: Synchronous Signal Input of Slave Machine | USBRS422 | Detection Area Setting Type | Semiconductor laser laser safety class 1 | 130g | Output 5 -Point Output 1: Output Off Output 2: Output Off Output By Detection In The Area 3: Output Off Off Off 4: Failure Output Output 4: Failur e output output 5: if the output of sync output is output, it will indicate 1 to 3 ObstacleS. |
Click on the part number for more information about each product
Other products of Hokuyo Electric
View more products of Hokuyo Electric
About Company Handling This Product
- Japan
- Since 1946
- 240 employees