ETC/DSRC Test System ETC/ITS Spot Denki Strength Measurement System ME9200
Micronics
About This Product
A system that measures the electric field intensity distribution of ETC or ITS spots and creates electric field intensity graphs and maps.
Measure the electric field intensity distribution of ETC/ITS spots by operation waves or CW in a short time to create an electric field intensity graph and map diagram
･ The price is 2.95 million yen
It can be measured by a bogie and in -vehicle, and the price of the ETC measurement system (9 antennas) is 2.95 million yen.
･ ITS spot electric field intensity measurement function
As an option, you can add an electric field strength measurement function of the ITS spot. (500,000 yen)
･ Measure automatically while driving
When measuring multiple roadside aircraft on the main line, when the automatic measurement mode is applied, the measurement is automatically performed while running according to the position and measurement conditions of the registered measurement section.
If you wear up to 17 antennas in the bogie type, you can measure a 3.2m width lane in one time.
·antenna
The standard is 9 pieces and the 3.2m width lane can be measured in two times. The number of antennas can be increased to 17. You can also measure the transmission frequency and transmission power of the roadside aircraft with a CW wave using one antenna.
External dimensions: 138 (W) x 30 (d) x 101 (H) mm (excluding projections)
Frequency accuracy: ± 20 ppm
･ A bogie
Since the speed sensor is equipped, the measurement distance is automatically calculated. By installing 17 antennas, you can measure a 3.2m width lane in one time. The antenna grounds can be set to 1m or 2m.
External dimensions: 700 (W) x 1000 (d) x 350 (H) mm (folded)
External dimensions: 700 (W) x 1000 (d) x 900 (H) mm (at assembly)
·control unit
There is a SW that matches the zero point at the start SW and the roadside machine position. At the time of in -vehicle measurement, the car speed pulse is taken in and the distance is calculated. You need a DC12V power supply.
External dimensions: 430 (W) x 450 (d) x 101 (H) mm (except protrusion)
･ PC software
Control the control unit and immediately display the measured electric field intensity value in a graph or map diagram. When measuring the electric field strength of multiple road aircraft on the main line, you can apply automatic measurement mode. If this is registered in advance, "Kilopost" and the measurement conditions of the multiple measurement sections and the measurement conditions can be measured at the time of running, so it can be saved.
* The AC/DC converter (used when supplying the power supply from the AC100V, the list price is 5,000 yen), and the 9 antenna unit (used for in -vehicle, 40,500 yen) are optional.
･ Measurement by a bogie
Use the Me9200 bogie type to measure the electric field intensity distribution of the roadside aircraft installed on the ETC gate on the highway in a short time in CW and operation waves.
･ Measurement by car
Using the ME9200 in -vehicle type, the electric field intensity distribution of the roadside aircraft installed on the ETC gate, on the main line, and the ITS spot on the expressway is easily measured while running regularly (100 km/h or less).
-
Product
ETC/DSRC Test System ETC/ITS Spot Denki Strength Measurement System ME9200
-
Handling Company
Micronics
1 Models of ETC/DSRC Test System ETC/ITS Spot Denki Strength Measurement System ME9200
| Product Image | Part Number | Price (excluding tax) | Antenna external dimensions | Antenna frequency accuracy | Bogie external dimensions | Control unit external dimensions |
|---|---|---|---|---|---|---|
|
|
Me9200 |
$ 19,470.00〜 | 138 (W) x 30 (D) x 101 (H) mm (excluding projection) | ± 20ppm | 700 (W) x 1000 (D) x 350 (H) mm (folding) 700 (W) x 1000 (d) x 900 (H) mm (at assembly) | 430 (W) x 450 (D) x 101 (H) mm (excluding projection) |
Other products of Micronics
View more products of Micronics
About Company Handling This Product
- Japan
- Since 1986