ETC / DSRC Test System DSRC Road System ME9300V With transmission power adjustment function
Micronics
About This Product
A system that utilizes ETCs used on highways for the private sector. ETC In -vehicle -specific WCN is read and available for various applications.
The ME9300 system consists of DSRC antenna ME9301/Me9301V, interface box ME9302, and dedicated I/F cable Me9303.
・ WCN (Wireless Call Number)
With a 12 -digit specific number attached to the ETC in -vehicle device, you can identify the vehicle.
・ DSRC (Dedicated Short Range Communication, narrow range communication)
Under the name of wireless communication technology, one application of this technology is an ETC used on highways.
* This product requires application as a "wireless station" and obtaining a license at each installation point. In addition, as a wireless worker at the installation point, a qualified person who is higher than "3rd grade land special wireless engineer" is required.
* For applications for wireless stations, please contact us for details.
・ Various services will be provided for WCN registered vehicles
Read the WCN by communicating with the ETC in -vehicle device mounted on the vehicle, and match the match with the pre -registered WCN.
Determine the digital output DO from the match/disagreement between the digital input DI and the WCN.
・ Equipped with digital input DI and digital output do
The input format of the DI is a photo coupler, and the output format of DO is equipped with 6 photos MOS relays.
・ Maximum 100m dedicated IF cable
The dedicated IF cable ME9303 connected to the DSRC antenna ME9301 is up to 100m.
・ Maximum number of registration of WCN 160,000
The maximum number of WCNs registered in the interface box ME9302 is 160,000.
・ There is a pre -preparation function for various services
Use the ME9300 control software MAS930 on the PC to set up a "sequence setting" according to the processing scenario.
Also, read the WCN of the vehicle using the DSRC communication unit Me9115a/a+C and register it in ME9302.
・ You can communicate with external devices
The interface box ME9302 has LAN and RS-232C as an interface for communication with external devices.
・ You can also transfer the read WCN to external devices as it is.
You can also communicate with the ETC in -vehicle equipment and read the WCN and transfer the data to an external device. In this case, no pre -registration of WCN is required.
・ ME9301V can adjust transmission power
ME9301 is a 5MW fixed type of transmission power.
The Me9301V can change the transmission power within the range of 0.2 to 1.25MW (8db variable width).
-
-
Product
ETC / DSRC Test System DSRC Road System ME9300V With transmission power adjustment function