Set flow rate Fixed a fixed flow valve lincole valve
Nippon Flow Cell
About This Product
It is a fixed settlement valve that supplies a certain flow rate even if the pressure changes.
Feature
･ New lineup of screw -in type (HST type: Nun diameter 15A to 25A, HYS type: Nun diameter 25A to 50A)
･ No external energy such as electricity and air pressure is required
･ Follow the pressure fluctuation instantly
･ The front and rear direct pipes are not required
･ Activate from low differential pressure
･ It can be used for both horizontal and vertical piping (specify the flow direction when ordering)
･ HYS type and HYG type can be maintained without removing the pipe.
* The lineup is the lincolor valve for fire extinguishing equipment (Japan Fire Equipment Safety Center type certified product), and the lincolor valve for tap water (the Japan Water supply Association certified product).
-
Product
Set flow rate Fixed a fixed flow valve lincole valve
-
Handling Company
Nippon Flow Cell
4 Models of Set flow rate Fixed a fixed flow valve lincole valve
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body type | Material | Maximum use pressure | Maximum used temperature | Nominal diameter | Set flow range | Used temperature range (not freezing) | accuracy | connection | fluid |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HST type |
Available upon quote | straight | FC200, SCS13, SUS304, NBR, PC, etc. | 1.4MPa | 90 ° C | 15A to 25A | 0.3-280m3/h liquid 4-2500m3/h (NTP) Gen | Material No.1 (body FC200): 0-90 ° C material No.2 (body SCS13): -20 to 90 ° C * If you change the gasket / O-ring material to PTFE, the maximum used temperature will be 120 ° C. | ± 5.0 % | Tipper tapered twist | liquid |
|
|
HSG type |
Available upon quote | straight | FC200, SCS13, SUS304, NBR, PC, etc. | 1.4MPa | 90 ° C | 15A to 150A | 0.3-280m3/h liquid 4-2500m3/h (NTP) Gen | Material No.1 (body FC200): 0-90 ° C material No.2 (body SCS13): -20 to 90 ° C * If you change the gasket / O-ring material to PTFE, the maximum used temperature will be 120 ° C. | ± 5.0 % | JIS10KFF flange | Liquid / gas |
|
|
HYS type |
Available upon quote | Y -type | FC200, SCS13, SUS304, NBR, PC, etc. | 1.4MPa | 90 ° C | 25A to 50A | 0.3-280m3/h liquid 4-2500m3/h (NTP) Gen | Material No.1 (body FC200): 0-90 ° C material No.2 (body SCS13): -20 to 90 ° C * If you change the gasket / O-ring material to PTFE, the maximum used temperature will be 120 ° C. | ± 5.0 % | Tipper tapered twist | Liquid / gas |
|
|
HYG type |
Available upon quote | Y -type | FC200, SCS13, SUS304, NBR, PC, etc. | 1.4MPa | 90 ° C | 15A to 200A | 0.3-280m3/h liquid 4-2500m3/h (NTP) Gen | Material No.1 (body FC200): 0-90 ° C material No.2 (body SCS13): -20 to 90 ° C * If you change the gasket / O-ring material to PTFE, the maximum used temperature will be 120 ° C. | ± 5.0 % | JIS10KFF flange | Liquid / gas |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Nippon Flow Cell
View more products of Nippon Flow Cell