High -performance series that uses inverter control Cosmopia Gourant Heat Shock Test Machine High Performance Series
Satake Martimics Co., Ltd.
About This Product
■ High -performance series adopting inverter control
Inverter control has been adopted to improve energy saving. In addition, the use of 100 -cycle continuous operation and the size of the LCD screen are also improved.
■ Reminds the exterior design
A stainless steel sheet is adopted for the exterior material, and a clear cover is attached to the left and right of the device.
■ Reduction of power consumption (in energy saving mode)
By controlling the high -temperature and low temperature side compressor of the secondary freezing cycle, the power consumption has been reduced compared to conventional machines.
■ 100 cycle continuous operation is adopted as standard
In 2 zones (low -temperature tests ⇔ high -temperature test), driving without defrosting is possible for up to 100 cycles. The test time can be reduced by continuous operation.
■ Large LCD screen
It has expanded from the conventional 8.4 inch to 10.4 inches (vertical).
■ Language switching function
The language displayed in the liquid crystal operation panel can be changed on the operation panel. The corresponding language is four languages: Japanese, English, Chinese (simplified), and Korean.
■ Time second unit setting
It is possible to set high temperature, room temperature and low temperature test time in seconds. You can respond to more detailed test conditions.
■ Data log function
If an alarm is stopped due to an abnormal detection, it is a function to save the operation status of the device just before the stop in a USB memory. It is useful for failure analysis by collecting data just before the stop.
■ Scroll operation
On the screen and trend graphs displaying the scroll bar, you can move from the display area by scrolling and display the hidden part from the screen.
■ Room temperature test time individual settings
It is possible to set the room temperature test time after the high temperature test and the normal temperature test time after the low temperature test. It can respond to test conditions stipulated in different test conditions after high temperature and low temperature.
■ Swipe operation
Touch the swipe operation area at the top of the screen on the 3 screen of the measurement screen, pattern setting screen, and trend graph screen, and move the screen between the three screens by moving the finger to the right or left.
-
Product
High -performance series that uses inverter control Cosmopia Gourant Heat Shock Test Machine High Performance Series
-
Handling Company
Satake Martimics Co., Ltd.
10 Models of High -performance series that uses inverter control Cosmopia Gourant Heat Shock Test Machine High Performance Series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Body configuration member interior | Cooling device refrigerant / Output (high temperature side) | Cooling device refrigerant / Output (low temperature side) | Exam tank content (L) | Examination tank dimension depth (mm) | Examination tank dimension height (mm) | Examination tank dimension width (mm) | Exterior of the body composition member | Number of continuous operation cycles | Product dimension depth (mm) | Product dimension height (mm) | Product dimension width (mm) | Protective device | Telegrated in the test tank | Temperature cycle performance return time | Temperature cycle performance return time warranty number | Temperature cycle performance sample mass | Temperature cycle performance sample type | Temperature cycle performance temperature measurement position | Temperature cycle performance test tank temperature / test time (high temperature) | Temperature cycle performance test tank temperature / test time (low temperature) | Temperature cycle performance test tank temperature / test time (room temperature) | Temperature drop time (low temperature tank) | Temperature fluctuation width (℃) | Temperature rising time (high temperature tank) | Temperature setting range pre -cooling temperature | Temperature setting range preheating temperature | Temperature setting test temperature | cooling method | method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ES-77LH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 4.5kW (inverter control) | R23 / 3.7kW (inverter control) | 74 | 390 | 460 | 410 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,400 | 1,980 | 1,380 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 30kg (bottom 20kg or less, sample shelf 5kg / or less) | Within 5 minutes | 5 cycle (low temperature start) | 6.5kg (IC4.5kg+jig 2.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 5 minutes | Room temperature → -75 ° C: within 50 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-107LH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 4.5kW (inverter control) | R23 / 3.7kW (inverter control) | 105 | 485 | 460 | 470 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,400 | 1,980 | 1,380 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, 5kg / piece of sample shelves / or less) | Within 5 minutes | 5 cycle (low temperature start) | 7.5kg (IC5.0kg+2.5kg 2.5kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 5 minutes | Room temperature → -75 ° C: within 50 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-207LH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 7.4kW (inverter control) | R23 / 4.5kW (inverter control) | 200 | 690 | 460 | 630 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,450 | 1,980 | 1,535 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, sample shelf 12kg / or less) | Within 10 minutes | 5 cycle (low temperature start) | 30kg (IC21kg+2 gear 2 steps 9.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 10 minutes | Room temperature → -75 ° C: within 45 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-307LH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 7.4kW (inverter control) | R23 / 4.5kW (inverter control) | 305 | 920 | 460 | 720 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,670 | 1,980 | 1,625 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, sample shelf 12kg / or less) | Within 10 minutes | 5 cycle (low temperature start) | 21kg (IC12kg+2 gear 2 steps 9.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 10 minutes | Room temperature → -75 ° C: within 45 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-77LH-R |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 4.5kW (inverter control) | R23 / 3.7kW (inverter control) | 74 | 390 | 460 | 410 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,400 | 1,980 | 1,380 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 30kg (bottom 20kg or less, sample shelf 5kg / or less) | Within 5 minutes | 5 cycle (low temperature start) | 6.5kg (IC4.5kg+jig 2.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 5 minutes | Room temperature → -75 ° C: within 50 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Air -cooled remote condenser type | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-107LH-R |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 4.5kW (inverter control) | R23 / 3.7kW (inverter control) | 105 | 485 | 460 | 470 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,400 | 1,980 | 1,380 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, 5kg / piece of sample shelves / or less) | Within 5 minutes | 5 cycle (low temperature start) | 7.5kg (IC5.0kg+2.5kg 2.5kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 5 minutes | Room temperature → -75 ° C: within 50 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Air -cooled remote condenser type | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-207LH-R |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 7.4kW (inverter control) | R23 / 4.5kW (inverter control) | 200 | 690 | 460 | 630 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,450 | 1,980 | 1,535 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, sample shelf 12kg / or less) | Within 10 minutes | 5 cycle (low temperature start) | 30kg (IC21kg+2 gear 2 steps 9.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 10 minutes | Room temperature → -75 ° C: within 45 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Air -cooled remote condenser type | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-307LH-R |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 7.4kW (inverter control) | R23 / 4.5kW (inverter control) | 305 | 920 | 460 | 720 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,670 | 1,980 | 1,625 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, sample shelf 12kg / or less) | Within 10 minutes | 5 cycle (low temperature start) | 21kg (IC12kg+2 gear 2 steps 9.0kg) | Plastic mold IC | Wind side | 150 ° C / 30 minutes | -65 ° C / 30 minutes | Atmosphere temperature / 10 minutes | Room temperature → -75 ° C: within 45 minutes | ± 0.5 | Room temperature → 200 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Air -cooled remote condenser type | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-107LHH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 4.5kW (inverter control) | R23 / 3.7kW (inverter control) | 105 | 485 | 460 | 470 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,400 | 1,980 | 1,380 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 30kg (bottom 20kg or less, sample shelf 5kg / or less) | Within 3 minutes | 5 cycle (low temperature start) | 5kg (IC2.5kg+jigs per step 2.5kg) | Plastic mold IC | Wind side | 125 ° C / 30 minutes | -55 ℃ / 30 minutes | - | Room temperature → -75 ° C: within 50 minutes | ± 0.5 | Room temperature → 150 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
|
|
ES-207LHH |
Available upon quote | Stainless steel plate (SUS304, 2B polishing finish) | R404A / 7.4kW (inverter control) | R23 / 4.5kW (inverter control) | 200 | 690 | 460 | 630 | Stainless steel plate (SUS430, hairline finish) | 100 cycle (low temperature start) | 1,450 | 1,980 | 1,535 | Electrical leakage breakers, electricity overload protection devices, high -pressure blocking devices, temperature fuse, door open operation prevention switch, temperature rise prevention device, protective fuse | Up to 50kg (bottom 40kg or less, sample shelf 12kg / or less) | Within 3 minutes | 5 cycle (low temperature start) | 10kg (IC5.5kg+jigs per step 4.5kg) | Plastic mold IC | Wind side | 125 ° C / 30 minutes | -55 ℃ / 30 minutes | - | Room temperature → -75 ° C: within 45 minutes | ± 0.5 | Room temperature → 150 ° C: within 20 minutes | -80 ° C ~ Test tank temperature low temperature setting value | Temple temperature high temperature setting value ~ 210 ° C |
Low-temperature test: -70 ~ 0 ℃ High temperature test: 60-200 ° C |
Two -yield frozen (water -cooled) with a mechanical compressor | Still, cold / warm air switching method, 2 zones / 3 zones can be switched |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Satake Martimics Co., Ltd.
View more products of Satake Martimics Co., Ltd.
About Company Handling This Product
- Japan
- Since 1920
- 200 employees