DM2 Series C Safety Exhaust Valve, Explosion -proof
Los Asian Co., Ltd.
🚗
Automotive & Transport Use
⚙️
Plastic & Rubber Manufacturing
🔩
Metal Processing Industry Use
About This Product
■ Product overview
-The monitoring function and air flow control function are simply integrated into the same valve elements.
The asynchronous operation of the valve element is detected by dynamic monitoring, the valve is latched in a safe state, and the residual exit pressure is less than 1%of the supply.
・ Reset can only be executed by integrated electricity (solenoid) reset. The valve cannot be reset even if the supply pressure is removed and added again.
・ Popet design that is resistant to dirt, compensation for wear, realize quick response and high flow rate
・ In contain the sparks generated from the coil or the inside of the housing, prevent ignition on the surrounding combustible substances, and prevent a greater explosion.
・ Contains a pressure switch with both normal opening (NO) contacts and regular (NC) contacts, and a control system showing whether the valve is in a locked state or in the execution ready. I will provide
・ The entrance port on both sides and the exit port provide flexible piping (a plug for unused ports is included)
・ Sistema library can be downloaded
There are other model numbers.
-
Product
DM2 Series C Safety Exhaust Valve, Explosion -proof
-
Handling Company
Los Asian Co., Ltd.
-
Categories
-
Usage Scenarios
Automotive & Transport Use / Plastic & Rubber Manufacturing / Metal Processing Industry Use
10 Models of DM2 Series C Safety Exhaust Valve, Explosion -proof
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Actday | Ambient temperature | Basic size | Entrance size | Exhaust size | Exit size | Feedback connection | Feedback rating | Flow media | Lockout | Maximum use pressure | Media temperature | PL rating | Pilot supply | Popetto/spool material | Port 1-2 flow | Port 2-3 flow | Pressure gauge | Safety category | Seal material | Soft start | Solenoid connection | Solenoid/sensor tapin configuration | Valve body material | Valve function | Valve series | Voltage | attachment | communication | feedback | height | length | monitoring | power consumption | reset | screw | structure | valve | weight | width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DM2CDA54A21019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 3/4 " | 3/4 " | 3/4 " | En 175301-803 Form a | Contact capacity -0.1a@ac125/250V; 0.1a@dc30v; 0.3a@dc60v | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.2CV (4,133NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Mechanical pressure switch | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA54A2X019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 3/4 " | 3/4 " | 3/4 " | Applicable | Applicable | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.2CV (4,133NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Not included | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA54B21019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 3/4 " | 3/4 " | 3/4 " | En 175301-803 Form a | Contact capacity -0.1a@ac125/250V; 0.1a@dc30v; 0.3a@dc60v | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.2CV (4,133NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | 110/120 VAC | Base mount | Applicable | Mechanical pressure switch | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 36va at the time of rush; 24.6va when holding | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA54B2X019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 3/4 " | 3/4 " | 3/4 " | Applicable | Applicable | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.2CV (4,133NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | 110/120 VAC | Base mount | Applicable | Not included | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 36va at the time of rush; 24.6va when holding | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA55A21019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 1 " | 1 " | 1 " | En 175301-803 Form a | Contact capacity -0.1a@ac125/250V; 0.1a@dc30v; 0.3a@dc60v | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.3CV (4,231NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Mechanical pressure switch | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA55A2X019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 1 " | 1 " | 1 " | Applicable | Applicable | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.3CV (4,231NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Not included | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA55B21019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 1 " | 1 " | 1 " | En 175301-803 Form a | Contact capacity -0.1a@ac125/250V; 0.1a@dc30v; 0.3a@dc60v | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.3CV (4,231NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | 110/120 VAC | Base mount | Applicable | Mechanical pressure switch | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 36va at the time of rush; 24.6va when holding | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA55B2X019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 8 | 1 " | 1 " | 1 " | Applicable | Applicable | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 4.3CV (4,231NL/min) | 9.4CV (9,250NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | 110/120 VAC | Base mount | Applicable | Not included | 12.73in (323.mm) | 5.41in (137.4mm) | internal | 36va at the time of rush; 24.6va when holding | solenoid | G | Dual popet | Safe exhaust-dangerous area | 8.4Lbs (3.7kg) | 7.48in (190mm) |
|
|
DM2CDA66A21019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 12 | 1 " | 1-1/2 " | 1 " | En 175301-803 Form a | Contact capacity -0.1a@ac125/250V; 0.1a@dc30v; 0.3a@dc60v | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 9CV (8,856NL/min) | 17CV (16,728NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Mechanical pressure switch | 13.71in (348.2mm) | 6.74in (117.2mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 15.3lbs (6.9kg) | 9.42in (239.3mm) |
|
|
DM2CDA66A2X019 |
Available upon quote | Electrical type | 15 to 122 f (-10 to 50 c) | 12 | 1 " | 1-1/2 " | 1 " | Applicable | Applicable | With filter, lubricating or unpleasant lubricating (mineral oil, viscosity class 32 ~ 46) | Not included | 120psig (8.3bar) | 40 to 175 F (4 to 80 c) | PLE | internal | Acetal resin & stainless steel | 9CV (8,856NL/min) | 17CV (16,728NL/min) | Applicable | Category 4 | Beech N | Not included | 3 Read wire with concrete | Applicable | Aluminum casting | Redundant 3/2 Single solenoid | DM2C series | DC24V | Base mount | Applicable | Not included | 13.71in (348.2mm) | 6.74in (117.2mm) | internal | 15 Watts | solenoid | G | Dual popet | Safe exhaust-dangerous area | 15.3lbs (6.9kg) | 9.42in (239.3mm) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Los Asian Co., Ltd.
View more products of Los Asian Co., Ltd.
About Company Handling This Product
- Japan