FPGA board (XILINX) XUP series
Fuji Soft Co., Ltd.
About This Product
Bittware's XILINX VIRTEX Ultrascale+ FPGA -based 3/4LENGTH PCIE X16 cards, XILINX Virtex Ultrascale+ FPGA -based low profile PCIE X16 cards are available.
-
Product
FPGA board (XILINX) XUP series
-
Handling Company
Fuji Soft Co., Ltd.
5 Models of FPGA board (XILINX) XUP series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Board Management Controller | External memory | Foam factor | Fpga | Host interface | On -board flash | Serial extension port (SEP) | Time stamp | USB port | Ultraport Slimsas | Utility header | cooling | environment | power supply |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
XUP-P3R |
Available upon quote | Included | 4 DIMM sites: DDR4 X72 with an ECC, up to 576 Mbit dual QDR-II+ X18 (two independent 288 MBit banks) | 3/4 LENGTH, Standard-Height PCIe dual slot board, 9.4 x 4.37 inches | Virtex Ultrascale+: VU9P, core speed grade-2 | X16 GEN3 PCIe interface directly connected to FPGA | Flash memory for starting FPGA | Expansion interface to FPGA via a 20X GTY transceiver (optional, second slot required), 14X GPIO signal for FPGA | - | Micro USB (USB 2.0): For debugging and flash programming | - | - | Standard: Double-Width Active fan and heat sink, option: Double-Width Passive Heat Sink Heat Piping high-handed cooling | Operation temperature: 5 to 35 ℃ | Onboard power supply obtained from 12V PCIe slot and AUX connector (6 pins) |
|
|
XUP-PL4 |
Available upon quote | Included | - | Ropelofile (Half-Height, Half-Length) PCIe slot board, 6.6 x 3.85 inches | Virtex Ultrascale+: C1517 Package VU3P, Core Speed Grade-2 | X16 GEN3 PCIe interface directly connected to FPGA | Two banks, up to 16 GB DDR4 (X72) to launch FPGA | - | 1PPS input / output, reference clock input / output (optional) | - | - | Micro USB: Access to BMC and programming flash | Standard: Single-Width Active Heat Sink | Operation temperature: 5 to 35 ℃ | Onboard power supply obtained from 12V PCIe slot |
|
|
XUP-VV8 |
Available upon quote | Voltage/current/temperature monitoring, power sequence and reset, field upgrade, FPGA configuration and control, clock configuration, I2C bus access, USB2.0, voltage override | Four DIMM sites that support the following: Up to 128GBYTES DDR4 X72 with ECC, up to 576 M-bit dual QDR-II + X18 (two independent 288m bit bank) | 3/4-LENGTH, 10 X 4.37 Inches (254 x 111.15 mm), etc. | Virtex Ultrascale + (D2104 package VU9P or VU13P), core speed grade-2 | X16 GEN3 interface directly connected to FPGA | Flash memory for starting FPGA | - | 1PPS input and 10MHz clock input | Access to Micro USB: BMC, FPGA JTAG, and FPGA UART | - | - | Standard: Dual-Willth Passive Heatsink, Optional: Single-Width Passive Heatsink, etc. | Operation temperature: 5 to 35 ℃ | Onboard power supplied from 12V PCIe slots and two AUX connectors (8 pins) |
|
|
XUP-VV4 |
Available upon quote | Included | Two DIMM sites: Up to 128Gbytes DDR4 X72 with ECC, up to 576 MBIT dual QDR-II+ X18 (two independent 288 Mbit bank) | 3/4-LENGTH, Standard-Height PCIe dual slot board, 10 x 4.37 inches (254 x 111.15mm) | Virtex Ultrascale+, VU13P D2104 package, core speed grade-2 | X16 GEN3 interface directly connected to FPGA (power from PCIe connector is not used) | Flash memory for starting FPGA | - | - | Micro USB: Access to BMC, FPGA JTAG, FPGA UART | 16X GTY 2 Ultraport Slimsas connected to FPGA: Supports additional X16 or X8 PCIE interface (need soft IP core and additional slots) | 1PPS input to the breakout board, 10MHz clock input | Standard: DOUBLE-WIDTH passive heat sink, options: DOUBLE-WIDTH liquid cooling | Operation temperature: 5 to 35 ℃ | The on-board power supply is supplied from the 12V PCIe slot and the AUX connector (8-pin) |
|
|
XUP-VVH |
Available upon quote | Included | Two DIMM sites: Up to 128 gigabyte DDR4 X72 with ECC, up to 576 MBIT dual QDR-II+ X18 (two independent 288Mbit bank) | 3/4-LENGTH, Standard-Height PCIe dual slot board, 10 x 4.37 inches (254 x 111.15mm) | Virtex Ultrascale+: VU35P or VU37P, 8Gbytes HBM2 high bandwidth DRAM, core speed grade-2 | X16 GEN3 interface | Flash memory for starting FPGA | - | - | Micro USB: Access to BMC and FPGA JTAG | 16X GTY 2 Ultraport Slimsas connected to FPGA: Supports additional X16 or X8 PCIE interface (need soft IP core and additional slots) | UART, 1PPS input, 10MHz clock input on the breakout board | Standard: DOUBLE-WIDTH Passive Heat Sink | Operation temperature: 5 to 35 ℃ | Onboard power supply obtained from 12V PCIe slot and AUX connector (8 pins) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Fuji Soft Co., Ltd.
View more products of Fuji Soft Co., Ltd.
About Company Handling This Product
- Japan
- Since 1970
- 9,570 employees